YeeSite 120W 24LEDs RGBW Stage Wash Light Bar Instruction Manual

1. Introduction

Thank you for choosing the YeeSite 120W 24LEDs RGBW Stage Wash Light Bar. This product is designed to provide versatile and dynamic lighting effects for various events and professional applications. It features a dual-zone lighting design with 24 powerful RGBW LEDs in the center and RGB strips on both sides, offering vibrant wall-washing and ambient effects.

1.1 Safety Information

• Always connect the unit to a grounded circuit to avoid the risk of electrocution.
• Ensure the power voltage matches the specified voltage range (110-240V).
• Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• Avoid direct eye exposure to the light source, as it can cause eye damage.
• Ensure adequate ventilation around the unit to prevent overheating.
• Keep the unit away from moisture, water, and flammable materials.

2. Package Contents

Upon opening the package, please verify that all items listed below are included and in good condition:

• 1 x 24LEDs RGBW Wash Light Bar
• 1 x Power Cable
• 1 x User Manual (this document)
• 2 x Mounting Brackets

Figure 2.1: Items included in the package.

3. Product Overview

The YeeSite 120W 24LEDs RGBW Stage Wash Light Bar features a robust aluminum construction and a unique dual-zone lighting design. It integrates 24 powerful RGBW LEDs for broad wash effects and additional RGB strips on both sides for layered ambient lighting.

Figure 3.1: Front view of the YeeSite 120W 24LEDs RGBW Stage Wash Light Bar.

Figure 3.2: Example of colorful wash effects on a wall.

Figure 3.3: Dual-zone lighting with RGBW LEDs and RGB strips.

4. Specifications

5. Setup

5.1 Mounting the Light Bar

The light bar includes adjustable brackets for flexible mounting options. It can be used for floor uplighting, wall lighting, or truss-mounted installations.

• Floor Uplighting: Attach the brackets to the sides of the light bar and position it on the floor, adjusting the angle as needed.
• Wall Mounting: Secure the brackets to a stable wall surface using appropriate hardware (not included), then attach the light bar.
• Truss Mounting: Attach the brackets to a lighting truss using suitable clamps (not included). Ensure the clamps are securely fastened.

Figure 5.1: Mounting options for the light bar.

5.2 Power Connection

Connect the included power cable to the light bar and then to a standard power outlet. The unit supports wide voltage input (110-240V).

Daisy Chain Power: For larger setups, multiple light bars can be daisy-chained together to share a single power source. This reduces cable clutter and simplifies power distribution. You can connect up to 6 units at 110V or 10 units at 230V.

Figure 5.2: Daisy chain power connection diagram.

6. Operating Modes

The light bar offers multiple operating modes, which can be selected and configured using the control panel located on the rear of the unit.

6.1 Control Panel Overview

The control panel features a digital display and four buttons: MENU, UP, DOWN, and ENTER. These buttons allow you to navigate through the settings and select different operating modes.

Figure 6.1: Rear control panel of the light bar.

6.2 Auto Mode

In Auto Mode, the light bar cycles through 105 preloaded shows (56 for RGB strip, 49 for RGBW LED). This mode is ideal for quick setup and dynamic lighting without external control.

6.3 Sound Active Mode

The Sound Active Mode allows the light bar to react to music and ambient sounds. There are 4 distinct sound-active modes tailored for RGB Strip only, RGBW LED only, combined effects, or random beats. Sensitivity can be adjusted across 9 levels to match the audio environment.

6.4 Master-Slave Mode

To synchronize multiple light bars, connect them in a Master-Slave configuration. One unit acts as the Master, controlling the others (Slaves). Connect the DMX OUT of the Master unit to the DMX IN of the first Slave unit, and then daisy-chain subsequent Slave units. Ensure all units are set to the correct Master or Slave mode via their control panels.

Figure 6.2: Master-Slave setup for synchronized lighting.

6.5 DMX Control Mode

For advanced and precise control, the light bar can be operated via DMX. It supports 8, 15, 40, or 92 DMX channels, allowing for detailed control over individual pixels and effects. Connect a DMX controller to the DMX IN port of the first light bar, and then daisy-chain to other units using the DMX OUT ports.

Figure 6.3: DMX control setup.

6.6 Video Demonstration of Operating Modes

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your light bar.

• Cleaning: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Overheat Protection: The fanless design ensures silent operation. If the internal temperature reaches 50–65°C, the light bar automatically reduces brightness to cool down, protecting the components. Allow sufficient space for heat dissipation.
• Storage: When not in use, store the light bar in a dry, dust-free environment.

8. Troubleshooting

If you encounter issues with your light bar, refer to the following common problems and solutions:

• No Power:
  • Check if the power cable is securely connected to both the light bar and the power outlet.
  • Verify that the power outlet is functional.
• No Light Output:
  • Ensure the unit is powered on and not in a blackout mode.
  • If using DMX, check DMX connections and addressing.
• Incorrect DMX Control:
  • Verify the DMX address setting on the light bar matches your controller.
  • Check DMX cable connections for proper polarity and continuity.
  • Ensure the DMX controller is sending valid signals.
• Light Bar Overheating:
  • Ensure adequate airflow around the unit.
  • Reduce ambient temperature if possible.

9. Warranty and Support

The YeeSite 120W 24LEDs RGBW Stage Wash Light Bar comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or warranty claims, please contact YeeSite customer service through the retailer where the product was purchased or visit the official YeeSite website for contact information.