1. Introduction
Thank you for choosing the NKPU 60-inch Ceiling Fan with Light. This product is designed to provide efficient air circulation and lighting for both indoor and outdoor patio spaces (not directly exposed to rain). It features a quiet DC motor, dimmable LED light, and convenient control options via remote or a mobile application. Please read this manual thoroughly before installation and operation to ensure safe and correct use.
Image 1.1: NKPU 60-inch ceiling fan with light and remote control, showcasing its modern design and features.
2. Safety Information
- Always turn off the power at the circuit breaker before beginning installation or performing any maintenance.
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
- Ensure the mounting structure can support the weight of the fan (approximately 35 lbs).
- Do not bend the blade holders during installation, balancing, or cleaning.
- Keep hands clear of the fan blades when the fan is operating.
- This fan is suitable for flat ceilings only and cannot be installed on sloped or angled ceilings.
3. Package Contents
Verify that all components listed below are included in your package:
- Ceiling Fan Motor Assembly
- Fan Blades (6 double-sided)
- LED Light Kit
- Remote Control
- Down Rods (6-inch and 8-inch)
- Mounting Bracket
- Hardware Pack (screws, wire nuts, etc.)
- User Manual
4. Specifications
| Feature | Specification |
|---|---|
| Brand | NKPU |
| Model Number | SY12-Brown |
| Color | Brown |
| Product Dimensions | 60"D x 60"W x 13.19"H |
| Number of Blades | 6 (Double-sided) |
| Motor Type | Reversible DC Motor |
| Number of Speeds | 6 |
| Light Type | Dimmable LED (10%-100%) |
| Color Temperatures | 3000K (Warm), 4500K (Natural), 6000K (Cool White) |
| Max Lumens | 3800 LM |
| Noise Level | ≤35dB |
| Air Flow Capacity | 8577 CFM |
| Control Method | Remote Control, Mobile App ("fan lamp pro") |
| Timer Settings | 1H, 2H, 4H, 8H |
| Down Rod Lengths | 6 inches, 8 inches |
| Voltage | 110 Volts |
| Wattage | 60 watts |
| Indoor/Outdoor Use | Indoor, Outdoor (not directly exposed to rain) |
Image 4.1: Diagram showing the fan's dimensions and suitable mounting options, including two downrod sizes (6" and 8").
5. Setup & Installation
Installation of the NKPU 60-inch ceiling fan is designed to be straightforward. Please follow these steps carefully. It is recommended to have two people for installation.
5.1 Pre-Installation Checks
- Ensure the power is OFF at the circuit breaker.
- Confirm your ceiling is flat; this fan is not suitable for sloped ceilings.
- Gather all necessary tools (screwdriver, wire strippers, ladder, etc.).
5.2 Mounting the Fan
- Attach the mounting bracket to the ceiling junction box. Ensure it is securely fastened and can support the fan's weight.
- Select the appropriate down rod (6-inch or 8-inch) for your ceiling height.
- Feed the electrical wires from the fan motor through the chosen down rod.
- Secure the down rod to the fan motor assembly.
- Carefully lift the fan assembly and hang it on the mounting bracket.
5.3 Wiring Connections
Connect the fan's electrical wires to your household wiring according to the provided wiring diagram. Use the quick-connect terminals for a secure connection. Ensure all connections are tight and properly insulated.
5.4 Attaching Blades and Light Kit
- Attach the six double-sided fan blades to the motor housing. Ensure screws are tightened securely.
- Connect the LED light kit wires and secure the light kit to the bottom of the fan motor assembly.
- Install the light cover.
Image 5.1: Visual guide for the easy installation process of the ceiling fan.
5.5 Installation Video
For a detailed visual guide, please refer to the official installation video:
Video 5.1: Official NKPU 60-inch ceiling fan installation video. This video demonstrates the step-by-step process of assembling and mounting the fan, including wiring connections and blade attachment.
6. Operating Instructions
Your NKPU ceiling fan can be controlled using the included remote control or the "fan lamp pro" mobile application.
6.1 Remote Control Functions
The remote control allows for easy adjustment of fan speed, light settings, and timer functions.
Image 6.1: Detailed view of the remote control with explanations for each button's function, including fan on/off, speed adjustment, light control, and timer settings.
- Fan On/Off: Powers the fan on or off.
- Fan Speed: Adjusts between 6 fan speeds.
- Light On/Off: Turns the LED light on or off.
- Color Temperature: Cycles through 3000K, 4500K, and 6000K light settings.
- Brightness Adjustment: Increases or decreases light brightness (10%-100%).
- Timer: Sets the fan to turn off after 1, 2, 4, or 8 hours.
- Reversible Motor: Changes the direction of blade rotation for summer (downward airflow) or winter (upward airflow) modes.
6.2 Mobile App Control ("fan lamp pro")
The "fan lamp pro" app provides additional control features and convenience.
- Download App: Scan the QR code below or visit https://www.jasonghost.com/fanlamppro/ to download the "fan lamp pro" app.
- Add Device: Open the app, press the "+" button to add a new device.
- Pairing: After the fan is powered on, click a pair of buttons on the remote control 1-2 times within 5 seconds to pair with the app. The fan will flash or beep to confirm successful pairing.
- Control: Use the app interface to adjust fan speed, light brightness, color temperature, and set timers.
Image 6.2: Screenshots of the "fan lamp pro" mobile application interface, showing the QR code for download, device adding process, and control options.
6.3 Reversible Motor Function
The fan features a reversible DC motor for year-round comfort.
- Summer Mode: Blades rotate counter-clockwise, pushing cool air downwards to create a cooling effect.
- Winter Mode: Blades rotate clockwise, drawing air upwards to circulate warm air trapped near the ceiling.
Image 6.3: Illustration of the reversible motor function, demonstrating airflow direction for both summer and winter modes.
6.4 Dimmable LED Light
The integrated LED light offers customizable illumination.
- Brightness: Adjust brightness from 10% to 100% using the remote or app.
- Color Temperature: Choose between Warm White (3000K), Natural White (4500K), and Cool White (6000K) to suit your preference.
Image 6.4: Visual representation of the dimmable LED light with three color temperature options (3000K, 4500K, 6000K).
6.5 Timer Function
Set the fan to automatically turn off after a specified period.
- Available timer settings: 1 hour, 2 hours, 4 hours, 8 hours.
- Activate the timer using the remote control or the mobile app.
Image 6.5: Display of the timer function with options for 1, 2, 4, and 8 hours.
6.6 Function Display Video
Observe the fan's various functions in action through this official video:
Video 6.1: Official NKPU 60-inch ceiling fan function display video. This video demonstrates the fan's operational features, including speed adjustments, light changes, and remote/app control.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Use a soft, damp cloth to clean the fan blades and motor housing. Do not use abrasive cleaners or solvents.
- Blade Balance: If the fan wobbles, check that all blade screws are tight. Refer to the troubleshooting section for further guidance.
- Light Kit: The LED light source is integrated and generally does not require replacement. If issues arise, contact customer support.
- Seasonal Check: Before changing fan direction for summer/winter, ensure the fan is clean and all components are secure.
8. Troubleshooting
If you encounter any issues with your NKPU ceiling fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power supply Loose wire connections Remote control battery low | Check circuit breaker and wall switch Verify all wire connections are secure (power off first!) Replace remote control battery |
| Light does not work | Loose wire connections Light kit malfunction | Check light kit wiring Contact customer support if light kit is faulty |
| Fan wobbles | Loose blade screws Unbalanced blades Loose mounting bracket | Tighten all blade screws Ensure blades are installed correctly and evenly Verify mounting bracket is securely fastened to the ceiling |
| Remote control not working | Battery low/dead Not paired with fan | Replace battery Refer to Section 6.1 for pairing instructions |
| App control not working | Not paired with fan Bluetooth/Wi-Fi issue App outdated | Refer to Section 6.2 for pairing instructions Ensure phone's Bluetooth/Wi-Fi is on and connected Update the "fan lamp pro" app |
If the problem persists after attempting these solutions, please contact NKPU customer service for assistance.
9. Warranty & Support
NKPU offers a worry-free shopping experience with dedicated customer support.
- Return Policy: 30-day no-hassle return policy.
- After-Sales Service: 2-year after-sales service.
- Customer Support: Our dedicated customer service team is available to assist with any installation or usage issues. Please refer to your purchase documentation for contact information.