FiiO Snowsky ANYTIME
FIIO Snowsky ANYTIME ANC Wireless Headphones User Manual
Model: Snowsky ANYTIME
1. Introduction
Thank you for choosing the FIIO Snowsky ANYTIME ANC Wireless Headphones. These headphones are designed to provide a high-quality audio experience with active noise cancellation, comfortable wear, and extended battery life. This manual will guide you through the setup, operation, and maintenance of your new headphones.
2. Package Contents
Please check the package for the following items:
- FIIO Snowsky ANYTIME ANC Wireless Headphones
- USB Charging Cable
- Quick Start Guide
3. Product Overview
Familiarize yourself with the components of your FIIO Snowsky ANYTIME headphones.
Figure 1: Side view of the FIIO Snowsky ANYTIME headphones, highlighting the USB-C charging port and LED indicator.
- Earcups: Soft, skin-friendly ear pads for comfortable wear.
- Headband: Ergonomically designed, retractable headband with 3D rotating hinges for a secure and comfortable fit.
- Control Buttons: (Specific button functions detailed in Operating Instructions)
- USB-C Port: For charging the headphones.
- LED Indicator: Displays power, charging, and pairing status.
Figure 2: Front view of the FIIO Snowsky ANYTIME headphones, showcasing the retro Y2K design.
4. Setup
4.1 Charging the Headphones
Before first use, fully charge your headphones. Connect the supplied USB charging cable to the USB-C port on the headphones and to a USB power source. The LED indicator will show charging status and turn off when fully charged. A full charge takes approximately 2 hours.
4.2 Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power button until the LED indicator flashes rapidly (usually blue and red), indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "FIIO Snowsky ANYTIME" from the list of found devices.
- Once connected, the LED indicator will typically show a solid blue light or flash slowly.
Multi-pairing: The headphones support connecting to two devices simultaneously. After pairing with the first device, put the headphones back into pairing mode and connect to the second device. The headphones will intelligently switch between the two connected devices.
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds.
- Power Off: Press and hold the Power button for approximately 5 seconds.
5.2 Active Noise Cancellation (ANC) and Transparency Mode
The FIIO Snowsky ANYTIME features Active Noise Cancellation to reduce ambient noise. Press the dedicated ANC button (location may vary, typically on an earcup) to cycle through modes:
- ANC On: Reduces external noise, ideal for noisy environments like subways or offices.
- Transparency Mode: Allows you to hear your surroundings while listening to audio, useful for awareness.
- ANC Off: Standard listening mode without noise cancellation.
5.3 Music Playback
- Play/Pause: Press the Multi-function button once.
- Next Track: Double-press the Multi-function button.
- Previous Track: Triple-press the Multi-function button.
- Volume Up: Press the Volume Up button.
- Volume Down: Press the Volume Down button.
5.4 Call Functions
- Answer/End Call: Press the Multi-function button once.
- Reject Call: Press and hold the Multi-function button for 2 seconds.
5.5 Gaming Mode
For an optimized gaming experience with reduced audio latency, activate Gaming Mode. Double-press the ANC button to turn Gaming Mode on. This reduces audio delay to less than 60 milliseconds, providing a near-wired gaming experience. When combined with noise cancellation, audio clarity is further enhanced.
6. Maintenance
- Clean the headphones regularly with a soft, dry cloth.
- Avoid exposing the headphones to extreme temperatures, humidity, or direct sunlight.
- Do not use abrasive cleaners or solvents.
- Store the headphones in a cool, dry place when not in use.
- Avoid dropping or subjecting the headphones to strong impacts.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Headphones do not power on. | Ensure the headphones are fully charged. Connect to a power source and try again. |
| Cannot pair with a device. | Ensure the headphones are in pairing mode (LED flashing). Turn off and on Bluetooth on your device. Move closer to the device. |
| No sound or poor sound quality. | Check volume levels on both headphones and the connected device. Ensure headphones are properly paired. Try re-pairing. |
| ANC is not effective. | Ensure ANC mode is activated. Adjust headphone fit to ensure a good seal around your ears. |
8. Specifications
- Brand: FiiO
- Model: Snowsky ANYTIME
- Color: Black
- Ear Placement: On-Ear
- Headphone Style: On-Ear
- Noise Control: Active Noise Cancellation (ANC)
- Connectivity: Wireless (Bluetooth)
- Bluetooth Version: 5.4
- Driver Size: 40mm
- Charging Time: Approximately 2 hours
- Battery Life (ANC On + Music Playback): Approximately 35 hours
- Battery Life (ANC Off + Music Playback): Approximately 58 hours
- Battery Life (ANC Off + Standby): Approximately 330 hours
- Included Items: USB Charging Cable, Quick Start Guide
9. Warranty and Support
The FIIO Snowsky ANYTIME headphones come with a 1-year warranty provided by the Japanese authorized dealer. Please retain your proof of purchase for warranty claims.
For technical support, warranty service, or further inquiries, please contact your local FIIO authorized dealer or visit the official FIIO website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.