1. Introduction
The PILSAMAS WiFi Caregiver Pager Smart Call System is designed to provide reliable and instant alerts for individuals needing assistance, such as the elderly, patients, or those in nursing care. This system connects to your 2.4G Wi-Fi network, enabling app alerts and remote monitoring without monthly fees. The included waterproof call buttons and wristband ensure accessibility in various environments, including wet zones.
Image: PILSAMAS WiFi Smart Caregiver Call System banner illustrating the product name and main components.
2. Package Contents
Your PILSAMAS WiFi Caregiver Pager Smart Call System (Model CF106 1R2B1W) package includes the following components:
- 1 x Receiver (Hub)
- 1 x Wristband Button
- 2 x Call Buttons
Video: This video provides an unboxing of the WiFi Caregiver Pager System, detailing all included components in the package.
3. Setup Guide
3.1 Powering On the Hub
- Connect the provided USB Micro cable to the Hub's charging port.
- Plug the USB cable into a standard USB power adapter (not included) and then into a wall outlet.
- The Hub will power on, and an LED light will indicate its status.
3.2 Connecting to Mobile App (Tuya Smart Life)
- Ensure your smartphone is connected to a 2.4G Wi-Fi network (5G networks are not supported).
- Download and install the "Tuya Smart" or "Smart Life" app from your device's app store.
- Open the app and register/log in to your account.
- On the Hub, long-press the pairing button (refer to the Hub diagram for location) for approximately 6 seconds until the LED light starts flashing continuously. This indicates pairing mode.
- In the app, tap "Add Device" or the "+" icon in the upper right corner.
- Select the appropriate device type (e.g., "Socket" under "Electrical" or "Sensors" if available, then choose "Wi-Fi").
- Follow the on-screen prompts to enter your 2.4G Wi-Fi network credentials.
- Once connected, the Hub's LED will stop flashing, and the device will appear in your app.
Video: This video demonstrates the initial setup process for the PILSAMAS Caregiver Pager, including powering on the device and connecting it to the mobile app.
3.3 Pairing Additional Call Buttons/Wristbands
The included call buttons and wristband are typically pre-paired with the Hub. If you need to add more accessories or re-pair existing ones:
- In the mobile app, navigate to the Hub's device page.
- Look for an "Accessories" or "Add Sub-device" option.
- Follow the app's instructions to put the Hub into pairing mode for accessories.
- Press the call button on the accessory you wish to pair. The Hub will confirm successful pairing with a sound or visual indicator.
Video: This video provides a step-by-step guide on how to add and pair additional accessories, such as call buttons, to your PILSAMAS Caregiver Pager system.
4. Operating Instructions
4.1 Triggering an Alert
To send an emergency alert, simply press the large red "CALL" button on any of the call buttons or the "SOS" button on the wristband. The button will light up to confirm activation.
Image: A person pressing a call button, with the Hub flashing a caller ID and sounding an alarm, and an instant app alert showing name/location.
4.2 Receiving Alerts
Upon activation of a call button:
- Hub Alarm: The Hub will flash the assigned number (1-6) in red LEDs and sound an audible alarm.
- App Notifications: An instant alert will be sent to your mobile app, displaying the name and location of the activated button (e.g., "Bedroom button").
- Family Sharing: Alerts can be shared with multiple family members or caregivers who have the app installed and are part of the shared group.
Image: Illustration of the multi-faceted alert system, including the Hub's visual and auditory alarm, smartphone app notifications, and the family sharing feature.
4.3 Customizing Settings via App
The mobile app allows for extensive customization:
- Chime Tones: Choose from 18 different chime tones.
- Volume Levels: Adjust the alarm volume with 4 levels (Mute, Low 30dB, Middle 60dB, High 110dB).
- Device Naming: Assign custom names to each button (e.g., "Bedroom button," "Grandma's Wristband") for easy identification.
- Alert History: View a detailed history of all triggered alerts.
Image: Screenshot of the mobile app interface showing options for customizing chime tones, volume, device names, and viewing alert history.
4.4 Family Sharing
Share app alerts with family members or other caregivers by using the sharing function within the app. This ensures multiple individuals are notified in case of an emergency.
Image: Diagram showing how the family sharing feature allows multiple users in different locations to receive app alerts.
5. Product Features
5.1 Extended Range
The system utilizes 433MHz technology, providing a reliable range of up to 328 feet (through walls). This ensures coverage throughout homes, hospitals, and nursing facilities, minimizing dead zones.
Image: Diagram illustrating the 328ft wall-through range of the system within a multi-story house, showing signal penetration.
5.2 IP65 Waterproof Design
The alert buttons and wristband are IP65-rated, making them resistant to direct water jets. They can be safely used in showers, bathtubs, or near sinks, and are designed to resist spills and high humidity. This feature is crucial for preventing falls in wet environments.
Image: Two scenes demonstrating the IP65 waterproof feature, with a person using a call button in a shower and another person wearing the wristband while washing hands at a sink.
5.3 Versatile Placement Options
The call buttons can be worn around the neck, mounted on a wall, or placed on a table. The adjustable, hypoallergenic wristband is designed for comfortable all-day wear. This versatility ensures the alert system is always within reach.
Video: This video showcases the portability and versatile placement options for the PILSAMAS emergency buttons, including wearing them as a pendant or wristband, and mounting them on surfaces.
6. Maintenance
6.1 Hub Power
The Hub is powered via a USB Micro cable and can be continuously powered by plugging it into a wall outlet. It also contains a 12V battery (included) for backup power.
6.2 Call Button Batteries
The call buttons and wristband use non-rechargeable batteries. When the battery is low, the device may indicate this through the app or a visual cue. To replace the batteries, carefully open the device using a small screwdriver (if provided) and insert new batteries of the specified type.
7. Troubleshooting
- No App Alerts: Ensure the Hub is connected to a 2.4G Wi-Fi network and has a stable internet connection. Check app notification settings on your phone.
- Buttons Not Triggering Hub: Verify that the buttons are within the operational range of the Hub (328ft). Check the batteries in the call buttons/wristband.
- Hub Not Powering On: Ensure the USB cable is securely connected to both the Hub and a working power source.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | CF106 1R2B1W |
| Package Dimensions | 5.2 x 4.69 x 2.83 inches |
| Item Weight | 9.3 ounces |
| Manufacturer | LORA |
| Batteries | 1 12V battery required (included for Hub) |
| Wi-Fi Connectivity | 2.4G Wi-Fi only |
| Wireless Technology | 433MHz |
| Range | Up to 328ft (through walls) |
| Waterproof Rating | IP65 (for buttons & wristband) |
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official PILSAMAS website. Keep your purchase receipt for warranty claims.