AEOCKY Max 50 Pint/D Dehumidifier User Manual

Introduction

Thank you for choosing the AEOCKY Max 50 Pint/D Dehumidifier. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before use and retain it for future reference.

Important Safety Instructions

To reduce the risk of fire, electric shock, or injury when using your dehumidifier, follow these basic precautions:

• Read all instructions before using the appliance.
• Always plug the unit into a grounded 3-prong outlet. Do not remove the grounding prong.
• Do not use an adapter.
• Do not use an extension cord.
• Unplug the dehumidifier before servicing.
• Do not operate the unit with a damaged power cord or plug.
• Do not use the unit in areas where flammable liquids or gases are stored.
• Ensure the air outlet is open before powering on the unit.

Setup and Installation

Upon receiving your dehumidifier, allow it to stand upright for at least 24 hours before plugging it in. This allows the refrigerant to settle properly.

Placement

Place the dehumidifier on a level surface in the area where humidity control is desired. Ensure there is adequate space around the unit for proper airflow (at least 8 inches from walls or furniture).

Figure 1: Front view of the AEOCKY Max 50 Pint/D Dehumidifier, showing its compact design and integrated handle.

Mobility

The unit is equipped with 360° caster wheels and an integrated handle for easy movement across rooms and floors. This design allows for effortless repositioning without lifting.

Drainage Options

Your dehumidifier offers three convenient drainage methods:

1. Manual Emptying: The transparent water tank collects condensed water. The unit will automatically shut off when the tank is full, and the multicolor ambient light will indicate this. Simply pull out the tank, empty it, and reinsert.
2. Continuous Drainage (Included Hose): For continuous operation without manual emptying, attach the included drain hose to the drainage port on the back of the unit. Ensure the hose is sloped downwards to allow gravity drainage into a suitable floor drain.
3. Continuous Drainage (Garden Hose Adapter): For customized drainage length, connect a standard garden hose using the provided adapter. This allows for flexible placement and continuous water removal.

Figure 2: Diagram illustrating the three drainage options: manual tank, continuous hose, and garden hose adapter.

Operating Instructions

The control panel on the top of the unit allows for easy management of all functions.

Figure 3: Close-up view of the intuitive control panel with touch buttons and digital display.

Power On/Off

Press the Power button to turn the unit on or off. Ensure the air outlet is open before powering on.

Mode Selection

Press the Mode button to cycle through the available operating modes:

• Dehumidify Mode: Standard operation to reduce humidity to your set level.
• Dry Mode: For continuous drying, often used for laundry or very damp areas.
• Continuous Mode: The unit runs continuously regardless of the set humidity level.

Humidity Setting

Use the HUMI button to adjust your desired humidity level between 30% and 80% relative humidity. The unit will operate to maintain this level.

Fan Speed

Press the Speed button to select between Low and High fan speeds. Higher speeds result in faster dehumidification.

Timer Function

The Timer button allows you to set an automatic shut-off time for the unit, up to 24 hours.

Child Lock

Activate the Lock function by pressing and holding the button for 3 seconds. This prevents accidental changes to settings, ideal for households with children or pets.

Ambient Light Indicator

The multicolor ambient light provides a visual indication of current humidity levels:

• Blue: Humidity below 45%
• Green: Humidity between 45% and 65%
• Red: Humidity above 65%
• Flashing Red: Water tank is full.

Maintenance

Regular maintenance ensures optimal performance and longevity of your dehumidifier.

Emptying the Water Tank

When the water tank is full, the unit will automatically stop and indicate with a flashing red ambient light. Carefully pull out the water tank from the front of the unit, empty the collected water, and slide it back into place. Ensure the tank is properly seated for the unit to resume operation.

Figure 4: Illustration of how to remove and empty the water collection tank.

Cleaning the Air Filter

The dehumidifier features a washable nylon filter. Periodically check and clean the filter to maintain air quality and unit efficiency. Simply remove the filter, rinse it under running water, and allow it to dry completely before reinserting.

Troubleshooting

If your dehumidifier is not operating as expected, consider the following common issues:

• Unit not turning on: Check if the power cord is securely plugged into a grounded outlet. Ensure the water tank is correctly inserted and not full. Verify the air outlet is open.
• No water collection: The ambient humidity might be below the set target. Increase the target humidity or select Continuous mode. Ensure the room temperature is above 42°F (5.5°C), as the unit's efficiency decreases in very cold conditions.
• Unit is noisy: Check if the unit is on a stable, level surface. Ensure the air filter is clean and not obstructed.
• Frost on coils: The unit features automatic defrost sensors. If frost appears, the unit will automatically enter defrost mode. This is normal operation in cooler conditions.

For persistent issues, please contact customer support.

Specifications

Warranty and Support

AEOCKY provides a 3-year product coverage for your dehumidifier, exceeding typical market standards. For any questions, technical support, or warranty claims, please refer to the contact information provided in your Quick Start Guide or visit the official AEOCKY store.

Visit the AEOCKY Store for more information.