Introduction
Thank you for purchasing the ROCAM CR1028E Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and to maximize your experience with its features, including dual alarms, adjustable display brightness, and a soft night light.
Product Features
- Large, Easy-Read Display: Features an extra-large screen with bold digits, clearly visible from any angle. Adjustable brightness with a dimmable night mode.
- User-Friendly Design: Simple button controls and intuitive setup for ease of use.
- Dual Alarms: Set separate wake-up times for weekdays and weekends. Includes an adjustable alarm volume.
- Soft Adjustable Night Light: Creates a cozy atmosphere with a gentle glow, offering three brightness levels.
- Battery Backup + USB Charging Port: Maintains time settings during power outages. Includes a USB-A and a Type-C port for charging devices.
- Time Format: Supports 12/24-hour format and Daylight Saving Time (DST) setting.
- Snooze Function: Provides extra minutes of sleep with an easy-to-press snooze button.
Setup Guide
1. Power Connection
Connect the provided power adapter to the DC 5V IN port on the back of the alarm clock and plug it into a standard electrical outlet. The display will light up.
2. Battery Backup Installation
For power-off memory, install 3 AAA batteries (not included) into the battery compartment on the bottom of the clock. This ensures that time and alarm settings are retained during a power outage, though the display will not be active.
Image: Rear view of the alarm clock showing the battery compartment and USB/Type-C charging ports. The battery compartment is open, revealing slots for three AAA batteries. The USB-A and USB-C ports are labeled for charging external devices.
3. Initial Time Setting
Upon first power-on or after a full power reset without battery backup, the time display may flash. Follow the "Setting Time" instructions in the Operating section to set the current time.
Operating Instructions
Button Overview
Image: Top-down view of the ROCAM CR1028E Alarm Clock, highlighting the function of each button. Labels point to 'TIME DIM' for time setting and brightness adjustment, 'AL1' and 'AL2' for alarm settings, '+' and '-' for volume and adjustment, 'VOL DST' for volume and Daylight Saving Time, and 'SNOOZE OK / Night Light' for snooze and night light control.
- TIME DIM: Press to enter time setting mode. Press repeatedly to adjust display brightness.
- AL1 / AL2: Press to set Alarm 1 or Alarm 2.
- + / -: Use to adjust values (time, alarm, volume).
- VOL DST: Press to adjust alarm volume. Hold to activate/deactivate Daylight Saving Time.
- SNOOZE OK / Night Light: Press to snooze an active alarm or confirm settings. Hold to turn on/off the night light and adjust its brightness.
1. Setting Time
- Press and hold the TIME DIM button until the hour digits flash.
- Use the + or - buttons to adjust the hour.
- Press TIME DIM again to move to minute setting. Use + or - to adjust minutes.
- Press TIME DIM again to select 12-hour or 24-hour format. Use + or - to toggle.
- Press TIME DIM again to set the year, then month, then day, using + or -.
- Press TIME DIM one last time or wait 10 seconds for the settings to save automatically.
Image: The ROCAM CR1028E Alarm Clock showing a clear, large blue digital display of the time (10:28 AM) and the day (MON). This image emphasizes the easy readability of the clock face.
2. Setting Alarms (Alarm 1 & Alarm 2)
The clock features two independent alarms. The setting process is identical for both.
- Press and hold the AL1 (or AL2) button until the alarm hour digits flash.
- Use the + or - buttons to adjust the alarm hour.
- Press AL1 (or AL2) again to move to minute setting. Use + or - to adjust minutes.
- Press AL1 (or AL2) again to select the alarm mode:
- MON-SUN: Alarm sounds every day.
- MON-FRI: Alarm sounds on weekdays only.
- SAT-SUN: Alarm sounds on weekends only.
- Use + or - to cycle through these options.
- Press AL1 (or AL2) one last time or wait 10 seconds for the settings to save. An alarm icon will appear on the display, indicating the alarm is active.
Image: The ROCAM CR1028E Alarm Clock displaying the time with two alarm icons active. Insets show examples of Alarm 1 set for 7:30 AM and Alarm 2 for 9:30 AM, illustrating the dual alarm capability.
Image: Close-up of the back of the ROCAM CR1028E Alarm Clock, showing two slide switches labeled for Alarm 1 and Alarm 2. Each switch has positions for MON-SUN (Daily), MON-FRI (Weekday), and SAT-SUN (Weekend) alarm modes.
3. Stopping/Disabling an Alarm
- When an alarm sounds, press the SNOOZE OK / Night Light button to activate snooze (alarm will sound again after 9 minutes).
- To turn off the alarm for the day, press any other button (TIME DIM, AL1, AL2, +, -, VOL DST) when the alarm is sounding. The alarm icon will remain on, indicating it will sound again the next scheduled day.
- To completely disable an alarm, press the AL1 (or AL2) button once. The corresponding alarm icon will disappear from the display. Press it again to re-enable.
4. Adjusting Display Brightness
The display brightness can be adjusted to 5 levels.
- In normal time display mode, press the TIME DIM button repeatedly to cycle through the 5 brightness levels (LV1 to LV5).
- The clock also features an automatic dimming mode for night.
Image: The ROCAM CR1028E Alarm Clock plugged into a wall outlet next to a bed, with multiple insets showing the clock display at various brightness levels (LV1 to LV5). This demonstrates the adjustable brightness feature.
5. Adjusting Alarm Volume
The alarm volume can be adjusted to 5 levels, from soft to loud (up to 110 dB).
- In normal time display mode, press the VOL DST button.
- Use the + or - buttons to adjust the volume level.
- The volume level will be displayed temporarily.
Image: The ROCAM CR1028E Alarm Clock on a bedside table, with sound wave graphics emanating from it, illustrating its loud alarm capability. Text indicates 5 volume levels from soft to 110 dB.
6. Using the Night Light
The clock features a soft night light with 3 adjustable brightness levels.
- Press and hold the SNOOZE OK / Night Light button to turn the night light on.
- Press the SNOOZE OK / Night Light button repeatedly to cycle through the 3 brightness levels.
- Press and hold the SNOOZE OK / Night Light button again to turn the night light off.
Image: Two ROCAM CR1028E Alarm Clocks on bedside tables in a dimly lit room. One clock shows its night light glowing softly, creating a warm ambiance. The other clock's display is visible, indicating the time.
7. Daylight Saving Time (DST)
To adjust for Daylight Saving Time:
- Press and hold the VOL DST button.
- The time will adjust forward or backward by one hour, and a "DST" indicator will appear/disappear on the display.
8. USB Charging Port
The alarm clock includes a USB-A and a Type-C port on the back for charging external devices (e.g., smartphones, tablets). Simply connect your device's charging cable to the appropriate port.
Image: The ROCAM CR1028E Alarm Clock with a smartphone and wireless earbuds case connected to its USB-A and Type-C charging ports on the back. The phone screen shows a charging indicator.
Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: If the battery backup function seems unreliable, replace the 3 AAA batteries in the compartment. Ensure correct polarity.
- Storage: If storing the clock for an extended period, remove the backup batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is blank. | No power connection or power outage. | Ensure the power adapter is securely plugged into both the clock and a working electrical outlet. Check if there's a power outage. If using battery backup, the display will not light up, but time settings are retained. |
| Alarm does not sound. | Alarm is not set or is disabled. Volume is too low. | Check if the alarm icon is visible on the display. If not, set the alarm following the "Setting Alarms" instructions. Ensure alarm volume is set to an audible level. |
| Alarm keeps sounding after snooze/dismiss. | Alarm was only snoozed, not turned off for the day. | To stop the alarm for the day, press any button other than SNOOZE OK / Night Light when the alarm is sounding. To completely disable the alarm, press the corresponding AL1 or AL2 button once. |
| Time is incorrect. | Time was not set correctly or DST setting is incorrect. | Follow the "Setting Time" instructions to reset the time. Check the DST setting by holding the VOL DST button. |
| USB charging not working. | Device not connected properly, cable faulty, or clock not powered. | Ensure the USB cable is securely connected to both the clock and your device. Try a different cable or device to rule out compatibility issues. The clock must be powered via the adapter for USB charging to function. |
Specifications
- Brand: ROCAM
- Model: CR1028E
- Display Type: Digital (Blue LED)
- Power Source: Corded Electric (DC 5V)
- Battery Backup: 3 x AAA batteries (not included)
- Product Dimensions: 16.9 cm (W) x 8.6 cm (H)
- Special Features: Adjustable Brightness (5 levels), Adjustable Volume (5 levels, up to 110dB), Dual Alarms (Weekday/Weekend modes), Night Light (3 levels), USB-A & Type-C Charging Ports, 12/24-Hour Format, DST Setting, Snooze Function.
- Room Type: Bedroom, Home Office, Kid's Room, Living Room, Study Room
Warranty and Support
Specific warranty information is not provided in this manual. For warranty details, technical support, or customer service inquiries, please refer to the product packaging or contact ROCAM customer support directly through their official website or the retailer where the product was purchased.
You can often find support information by visiting the ROCAM Store on Amazon.