Antec C5 Curve ARGB Mid-Tower ATX PC Case Black

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Antec C5 Curve ARGB Mid-Tower ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

Product Features

• Curved Tempered Glass Panels: The case features curved tempered glass on the front and side, offering a panoramic view of internal components.
• Dual Chamber Design: An innovative dual-chamber layout separates the main components (CPU/GPU) from the power supply and drives, optimizing cooling and cable management.
• Back-Connect Motherboard Support: Designed to support next-generation back-connect motherboards for a cleaner front aesthetic and improved airflow.
• Vertical Cooling Scheme: Supports up to 10 fans with a bottom-to-top vertical airflow design for efficient heat dissipation.
• Pre-Installed ARGB PWM Fans: Includes 4 x 120mm ARGB PWM fans (3 reverse fans on the side/bottom, 1 standard fan at the rear) for massive air intake and customizable lighting.
• Built-In ARGB & PWM Fan Controller: Integrated controller allows lighting effects to be switched via an LED button or synchronized with the motherboard.
• Ample Water Cooling Space: Simultaneous support for top and bottom 360mm radiators, and a right-side 280mm radiator.
• Magnetic Dust Filters: Top and bottom magnetic dust filters are included for easy cleaning and dust prevention.
• I/O Panel: Equipped with one Type-C 3.2 Gen 2 port, two USB 3.0 ports, and HD audio jacks for high-speed transmission and connectivity.
• Storage Compatibility: Removable hard drive cage provides space for 1 x 3.5" HDD and 2 x 2.5" SSD. Additional 3.5" HDD or 2.5" SSD can be accommodated.
• RTX 40 Series Graphics Card Support: Supports graphics cards up to 410mm in length.
• Extensive Interior: Compatible with ATX and Micro-ATX motherboards, CPU coolers up to 160mm height, and power supplies up to 240mm length (including cables).

Setup Instructions

1. Unpacking and Initial Inspection

Carefully remove the PC case from its packaging. Inspect the case for any signs of damage during transit. Locate the accessory box, typically found within the hard drive cage.

2. Panel Removal

To access the interior for component installation, the tempered glass panels must be removed. The panels are secured with screws at the rear. After unscrewing, gently slide the glass panel backward and lift it off the bottom hanger. The top panel is also removable for easier access to fan/radiator mounts.

Figure 1: Front view of the Antec C5 Curve ARGB PC Case. The curved tempered glass panel is visible, showcasing the interior.

Figure 2: Side view of the Antec C5 Curve ARGB PC Case, highlighting the seamless tempered glass side panel.

Figure 3: Rear view of the Antec C5 Curve ARGB PC Case, showing the fan mount and PCI-E slots.

3. Motherboard Installation

Install your ATX or Micro-ATX motherboard onto the standoffs within the main chamber. This case supports back-connect motherboards, allowing cables to be routed from the rear for a cleaner front appearance.

Figure 4: Illustration of the Antec C5 Curve ARGB supporting back-connect motherboards, showing cables routed behind the motherboard tray for a clean front.

4. Storage Device Installation

Utilize the removable hard drive cage for 3.5" HDDs and 2.5" SSDs. Additional mounting points are available for 2.5" SSDs behind the motherboard tray. The hard drive cage is located in the secondary chamber.

Figure 5: Visual representation of the storage compatibility within the Antec C5 Curve ARGB case, showing locations for 3.5" HDDs and 2.5" SSDs.

5. Power Supply Installation

Install your ATX power supply unit in the dedicated compartment within the dual chamber design. Ensure proper cable routing through the provided cutouts.

Figure 6: Diagram illustrating the dual chamber design of the Antec C5 Curve ARGB, separating the CPU/GPU area from the PSU and drive bays for improved cooling and organization.

6. Fan and Radiator Installation

The case comes with 4 pre-installed ARGB PWM fans. Additional fans and radiators can be installed according to the cooling compatibility specifications. The vertical cooling scheme supports up to 10 fans for optimal airflow.

Figure 7: Visual demonstrating the vertical cooling airflow path within the Antec C5 Curve ARGB case, showing bottom-to-top air movement.

Figure 8: Close-up of the pre-installed ARGB PWM fans in the Antec C5 Curve ARGB case, including the fan controller.

Figure 9: Diagram showing the ample space for water cooling, supporting 360mm radiators at the top and bottom, and a 280mm radiator on the side.

Figure 10: Detailed view of water cooling clearance, indicating maximum radiator and fan thickness to avoid interference with other components.

Figure 11: Comprehensive diagram detailing fan and radiator compatibility, showing supported sizes for top, rear, side, and bottom mounts.

7. Graphics Card Installation

Install your graphics card into the appropriate PCI-E slot on your motherboard. The case supports large RTX 40 series graphics cards up to 410mm in length.

Figure 12: Image showing the internal space for graphics cards, confirming support for RTX 40 series cards up to 410mm.

8. Cable Management

Utilize the dual chamber design and cable routing channels to organize all power and data cables. This ensures optimal airflow and a clean interior aesthetic.

Figure 13: Internal layout of the Antec C5 Curve ARGB, illustrating the extensive space for components and cable routing.

9. I/O Panel Connections

Connect the front I/O panel cables (USB, audio, power, reset) to the corresponding headers on your motherboard.

Figure 14: Close-up of the top-mounted I/O panel on the Antec C5 Curve ARGB, showing the power button, LED control, USB 3.0, and Type-C 3.2 Gen 2 ports.

Operating Instructions

Once all components are installed and connected, replace the side and top panels. Connect your peripherals and power cable. Press the power button on the top I/O panel to start your system. Use the LED control button on the I/O panel to cycle through ARGB lighting effects or synchronize with your motherboard's software.

Maintenance

Dust Filter Cleaning

The Antec C5 Curve ARGB case is equipped with magnetic dust filters on the top and bottom. Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside your system. Simply detach the magnetic filters, clean them with water or a soft brush, and reattach once dry.

Figure 15: Image illustrating the magnetic dust filters on the top and bottom of the Antec C5 Curve ARGB case, designed for easy removal and cleaning.

General Cleaning

Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panels. For stubborn smudges on glass, a mild glass cleaner can be used, applied to the cloth first, not directly to the glass.

Troubleshooting

• System Not Powering On: Ensure all power supply cables are securely connected to the motherboard, graphics card, and other components. Verify the power switch on the PSU is in the 'On' position.
• Fans Not Spinning/RGB Not Working: Check all fan and ARGB connections to the integrated controller and/or motherboard. Ensure the controller is receiving power. Consult your motherboard manual for ARGB software synchronization.
• Overheating Issues: Verify that all fans are spinning correctly and installed in the correct orientation for optimal airflow (bottom-to-top is recommended for this case). Ensure dust filters are clean.
• Loose Panels: Ensure all screws securing the tempered glass panels are tightened. For magnetic panels, ensure they are properly aligned and seated.

Specifications

Warranty & Support

Antec products are covered by a limited warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Antec website or contact their customer support directly. Keep your proof of purchase for warranty claims.

For further assistance, please refer to the official Antec website: Antec Store