Introduction
Thank you for choosing the Aeitto Classic Horizontal Cold Press Juicer. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new juicer. Please read these instructions thoroughly before first use and retain them for future reference.
Image: The Aeitto Classic Horizontal Cold Press Juicer, showcasing its sleek black design, assembled with a clear juice collection cup filled with green juice and a separate pulp container.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions before operating the juicer.
- Do not immerse the motor base in water or other liquids.
- Ensure the appliance is unplugged before assembling, disassembling, or cleaning.
- Keep hands and utensils away from moving parts during operation to prevent injury.
- Do not use the appliance if the cord or plug is damaged.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Supervise children to ensure they do not play with the appliance.
- Do not operate the juicer continuously for more than 20 minutes. Allow it to cool down before resuming use.
- Only use attachments recommended or sold by the manufacturer.
Product Components
Familiarize yourself with the parts of your Aeitto Cold Press Juicer:
- Motor Base: The main unit containing the motor and control dial.
- Feeding Chute: Where fruits and vegetables are inserted.
- Pusher: Used to guide produce into the feeding chute.
- Auger (Squeezing Screw): The component that crushes and presses produce.
- Filter/Strainer: Separates juice from pulp.
- Juice Outlet: Where extracted juice flows out.
- Pulp Outlet: Where dry pulp is expelled.
- Juice Cup: Collects the extracted juice.
- Pulp Container: Collects the expelled pulp.
- Cleaning Brush: For easy cleaning of the filter and other parts.
Image: A detailed view of the juicer's internal components, including the auger and filter, illustrating the slow masticating and grinding system.
Setup and Assembly
- Unpack: Carefully remove all parts from the packaging.
- Clean: Wash all detachable parts (excluding the motor base) with warm, soapy water before first use. Rinse thoroughly and dry.
- Position Base: Place the motor base on a stable, flat, and dry surface.
- Assemble Juicing Body: Attach the juicing body to the motor base. Ensure it clicks securely into place.
- Insert Auger: Place the auger into the juicing body, aligning it with the motor shaft.
- Insert Filter: Position the filter over the auger.
- Attach Feeding Chute: Secure the feeding chute assembly onto the juicing body.
- Place Containers: Position the juice cup under the juice outlet and the pulp container under the pulp outlet.
Image: A close-up showing the one-button disassembly mechanism on the juicer, indicating how easily the juicing body can be detached from the motor base for assembly and cleaning.
Operating Instructions
1. Prepare Ingredients
- Wash all fruits and vegetables thoroughly.
- Peel fruits with thick skins (e.g., oranges, pineapples).
- Remove hard pits or seeds (e.g., from peaches, cherries, mangoes).
- Cut produce into pieces small enough to fit into the feeding chute without forcing.
2. Select Juicing Mode
The Aeitto Juicer features three modes:
- SOFT Mode (85-100 RPM): Ideal for softer fruits like oranges, watermelon, grapes, and berries.
- HARD Mode (95-110 RPM): Suitable for harder fruits and vegetables such as apples, pears, carrots, beets, celery, ginger, and kale.
- REV (Reverse) Function: Use this briefly if ingredients get stuck. Turn the dial to "REV" and hold for a few seconds, then release. Repeat if necessary. Ensure the juicer is switched to "O" (off) before plugging in.
Image: The control dial of the Aeitto juicer, clearly showing the "Soft" and "Hard" modes for different produce types, along with the "Rev" (Reverse) function to prevent clogging.
3. Start Juicing
- Plug in the juicer.
- Turn the control dial to the desired mode (SOFT or HARD).
- Gradually feed prepared ingredients into the feeding chute. Use the pusher gently if needed, but do not force ingredients.
- The juicer will extract juice into the juice cup and expel pulp into the pulp container.
- Do not operate the juicer for more than 20 minutes continuously. If juicing for longer periods, allow the motor to rest for at least 10-15 minutes before continuing.
- Once finished, turn the dial to "O" (off) and unplug the appliance.
Image: A close-up of the juicer in action, demonstrating the high volume of juice extracted into the measuring cup and the relatively dry pulp collected, indicating efficient juice separation.
Cleaning and Maintenance
Regular cleaning ensures optimal performance and longevity of your juicer.
1. Disassembly
- Ensure the juicer is unplugged.
- Press the one-button release to detach the juicing body from the motor base.
- Disassemble the feeding chute, filter, and auger.
2. Cleaning
- Rinse all detachable parts under running water immediately after use to prevent pulp from drying.
- Use the provided cleaning brush to remove any stubborn pulp from the filter mesh.
- All detachable parts are dishwasher safe for convenience.
- Wipe the motor base with a damp cloth. Never immerse the motor base in water.
3. Storage
- Ensure all parts are completely dry before reassembling or storing.
- Store the juicer in a clean, dry place.
Image: A split image showing a hand using the cleaning brush to clean the juicer filter under running water, and the juicer's detachable parts placed in a dishwasher rack, illustrating ease of cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Juicer stops during operation or gets stuck. | Overloading with ingredients; ingredients too large or hard. | Turn the dial to "REV" (Reverse) for a few seconds to clear the blockage. If the issue persists, turn off, unplug, disassemble, and clear manually. Cut ingredients into smaller pieces. |
| Low juice yield or wet pulp. | Incorrect mode selected; filter clogged; ingredients not properly prepared. | Ensure the correct mode (SOFT/HARD) is selected for the type of produce. Clean the filter thoroughly. Ensure produce is cut to appropriate size. |
| Unusual noise or vibration. | Improper assembly; foreign object inside; motor issue. | Turn off and unplug. Reassemble all parts correctly, ensuring they are securely locked. Check for any foreign objects. If noise persists, contact customer support. |
| Juicer does not turn on. | Not plugged in; power outlet issue; safety lock not engaged. | Ensure the power cord is securely plugged into a working outlet. Check that all parts are correctly assembled and the safety lock is engaged. |
Product Specifications
- Brand: Aeitto
- Model Name: Cold Press Juicer
- Color: Carbon Black
- Product Dimensions: 11.61"D x 10.06"W x 7.68"H
- Item Weight: 7.87 pounds
- Power Source: Corded Electric
- Voltage: 120 Volts (AC)
- Capacity: 600 Milliliters (Juice Cup)
- Special Features: Dishwasher Safe parts, Juice & Pulp Separation, One-button Disassembly, Quiet Motor (≤60dB), Triple Modes (SOFT, HARD, Reverse).
- Blade Material: Acrylonitrile Butadiene Styrene
Image: The Aeitto juicer with its key dimensions (height and depth) labeled, demonstrating its compact size for kitchen countertops.
Image: A graphic illustrating the quiet operation of the Aeitto juicer, comparing its noise level (≤60dB) to common household sounds like an alarm clock or car horn.
Warranty and Support
Aeitto offers a 12-month coverage period for this slow masticating juicer from the date of purchase. This warranty covers manufacturing defects under normal use.
Should you encounter any issues with your product, please do not hesitate to reach out to Aeitto customer service. Our team is dedicated to providing exceptional customer satisfaction and will assist you with troubleshooting or warranty claims.
For support, please visit the official Aeitto website or contact the retailer where the product was purchased.