1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Generico Shark Fin Antenna. Designed for select Renault models including Captur, Koleos, Scenic, Espace, and Clio (2008-2019), this antenna offers enhanced aesthetics, improved aerodynamics, and stable signal reception.
2. Product Features
- Enhanced Signal Performance: Replaces the original antenna to amplify vehicle signals during driving.
- Aerodynamic Design: Sleek shark fin shape reduces wind resistance and noise, contributing to a more elegant and sporty vehicle appearance.
- Durable Material: Constructed from high-quality ABS material, ensuring corrosion resistance, rich layering, delicate edges, and fade resistance for long-lasting durability.
- Integrated Functionality: Capable of receiving radio signals and potentially integrating other functions like GPS positioning and vehicle network connectivity.
- Stable Installation: Secure and stable installation, less prone to damage compared to traditional pole antennas, especially at high speeds or in strong winds.
Figure 2.1: The Generico Shark Fin Antenna, showcasing its sleek design and carbon fiber pattern.
Figure 2.2: The shark fin antenna installed on a car roof, highlighting its aesthetic integration.
Figure 2.3: Comparison showing the vehicle's appearance before and after replacing a traditional antenna with the shark fin antenna. The shark fin antenna offers a more integrated and modern look.
Figure 2.4: Diagram illustrating how the aerodynamic design of the shark fin antenna reduces airflow resistance and contributes to downforce, potentially improving driving stability.
3. Setup and Installation
The Generico Shark Fin Antenna is designed for easy, drill-free installation using double-sided adhesive tape. Follow these steps for optimal results:
- Prepare the Surface: Thoroughly clean and dry the area on your vehicle's roof where the antenna will be installed. Ensure it is free of dust, dirt, wax, or grease.
- Remove Original Antenna (if applicable): If your vehicle has a traditional screw-in antenna, carefully unscrew and remove it.
- Connect Signal Cable: Connect the copper screw signal cable from the shark fin antenna to the existing antenna base on your car. Ensure a firm and secure connection for optimal signal reception.
- Apply Adhesive: Peel off the protective backing from the double-sided adhesive tape on the underside of the shark fin antenna.
- Position and Press: Carefully align the shark fin antenna over the antenna base and press it firmly onto the cleaned roof surface. Apply even pressure for several seconds to ensure strong adhesion.
- Cure Time: Allow the adhesive to cure for at least 24 hours before washing the car or exposing it to harsh weather conditions.
Figure 3.1: Step-by-step visual guide for installing the shark fin antenna. This includes removing the old antenna, connecting the new one, and securing it with adhesive.
Figure 3.2: Detail of the copper screw connection, designed for stronger signal reception and firm installation.
Figure 3.3: Dimensions of the shark fin antenna, showing approximate measurements of 6.69 inches in length and 2.75 inches in height, with the adhesive base being approximately 3.93 inches.
4. Operating Instructions
Once installed, the Generico Shark Fin Antenna operates automatically to receive radio signals and other integrated functions (e.g., GPS, vehicle network connectivity, if applicable to your specific model and vehicle system). No manual operation is required for signal reception.
- Signal Reception: The antenna is designed to provide stable and improved signal reception for your car's radio.
- Aerodynamic Benefits: During driving, the antenna's design helps reduce wind noise and drag, contributing to a smoother ride.
5. Maintenance
To ensure the longevity and optimal appearance of your shark fin antenna, follow these simple maintenance guidelines:
- Cleaning: Clean the antenna regularly with mild car soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Drying: Dry the antenna with a soft cloth after washing to prevent water spots.
- Inspection: Periodically inspect the antenna for any signs of damage or loosening. While designed for durability, extreme impacts should be avoided.
6. Troubleshooting
If you experience issues with your Generico Shark Fin Antenna, consider the following:
- Poor Signal Reception:
- Ensure the copper screw signal cable is securely connected to the car's antenna base.
- Verify that the antenna is correctly positioned and fully adhered to the roof surface.
- Check if the issue is localized to specific areas (e.g., poor signal zones) or persistent.
- Antenna Loosening:
- Ensure the installation surface was thoroughly cleaned and dried before application.
- Re-apply pressure to the antenna to re-secure it. If necessary, consider using new automotive-grade double-sided adhesive tape.
- Physical Damage:
- While durable, severe impacts can cause damage. Inspect for cracks or breaks.
- Contact customer support if the antenna is damaged and requires replacement.
7. Specifications
| Brand | Generico |
| Model Number | 4955712157480 |
| Compatible Vehicles | Renault Captur, Koleos, Scenic, Espace, Clio (2008-2019 models) |
| Material | Durable ABS |
| Installation Method | Double-sided adhesive tape (no drilling required) |
| Dimensions (Approx.) | Length: 6.69 inches, Height: 2.75 inches (Base length: 3.93 inches) |
8. Customer Support
For any questions or assistance regarding your Generico Shark Fin Antenna, please contact our customer support team. We are committed to providing timely responses and support.
While specific warranty details are not provided in this manual, please refer to your purchase documentation or contact the seller for information on warranty coverage and return policies.
Seller: Leiyhzmo
Amazon Product Link: Product Page
