LEYAOYAO Fluted 47.2" Console Table with 3 Drawers

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your LEYAOYAO Fluted 47.2" Console Table. Please read all instructions carefully before assembly and use to ensure safe and proper functionality. This console table is designed for versatile use in various indoor settings, offering both storage and display options.

Image: LEYAOYAO Fluted Console Table in Dark Navy Blue, showcasing its design and functionality in an entryway setting.

Safety Information

For your safety and to prevent potential hazards, this console table is equipped with an anti-tipping device. It is crucial to install this device correctly to secure the table to a wall, thereby preventing it from tipping over. This measure is especially important in households with children or pets.

Image: Diagram illustrating the dimensions of the LEYAOYAO Fluted Console Table, including height, width, depth, and drawer measurements. The anti-tipping device is highlighted for safety.

Included Components

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Console Table Parts
• Assembly Guide
• Installation Tool (Hex Key, Screwdriver, etc.)
• Anti-Tipping Device

Setup and Assembly

Assembly of this console table is designed to be straightforward. It is recommended to assemble the table on a soft, clean surface to prevent scratches. Two people may be required for certain steps.

Step 1: Unpacking and Part Identification

Carefully remove all components from the packaging. Lay them out and compare them against the parts list in the included assembly guide to ensure everything is present.

Step 2: Assemble the Main Frame

Follow the step-by-step diagrams in the assembly guide to connect the side panels, top, and bottom shelf using the provided hardware and tools. Ensure all connections are secure but do not overtighten screws until the entire frame is assembled.

Step 3: Install Drawers

Assemble the drawer boxes according to the instructions. Install the drawer slides onto both the drawer boxes and the console table frame. Carefully insert the assembled drawers into their respective slots, ensuring smooth operation.

Step 4: Attach Anti-Tipping Device

Locate the anti-tipping hardware. Attach one bracket to the back of the console table near the top edge and the other to a wall stud using appropriate wall anchors (not always included, may need to be purchased separately based on wall type). Securely connect the two brackets with the provided strap or cable. This step is critical for stability and safety.

Video: Official product video demonstrating the features and assembly process of the LEYAOYAO Fluted Console Table. This video provides a visual guide to setting up and utilizing the table's storage capabilities.

Operating Instructions

The LEYAOYAO Fluted Console Table is designed for both functional storage and decorative display.

• Top Surface: Use the spacious tabletop for displaying decorative items such as lamps, potted plants, framed photos, or art pieces. Ensure items are placed stably to prevent falling.
• Drawers: The three fluted waveform panel drawers provide enclosed storage for smaller items like keys, mail, remote controls, or personal accessories. Pull the gold handles gently to open and close the drawers.
• Lower Shelf: The open lower shelf offers additional storage or display space. It can accommodate larger items such as storage bins, books, or decorative baskets.

Image: Top-down view of the LEYAOYAO Fluted Console Table with drawers open, revealing storage space for various items. A robotic vacuum cleaner is shown underneath, indicating clearance for cleaning.

Image: LEYAOYAO Fluted Console Table in a living room setting, demonstrating its use as a sofa table with decorative items and books on the lower shelf.

Maintenance and Care

To maintain the appearance and longevity of your console table, follow these care guidelines:

• Cleaning: Wipe the surface with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, which can damage the wood finish.
• Spills: Immediately blot any spills with a clean, dry cloth to prevent staining or water damage.
• Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters or protective pads. Keep the table away from direct sunlight and excessive humidity to prevent warping or fading.
• Weight Capacity: Do not overload the tabletop or shelves beyond their recommended weight limits to prevent structural damage.

Image: Close-up details of the LEYAOYAO Fluted Console Table, showing the thickened tabletop, waveform panel drawers, multi-functional open storage shelf, and stable wooden structure.

Troubleshooting

If you encounter any issues with your console table, refer to the following common solutions:

• Wobbly Table: Ensure all screws and fasteners are tightened. If the floor is uneven, use furniture pads or shims under the legs to stabilize the table.
• Sticky/Stuck Drawers: Check that the drawer slides are properly aligned and free of obstructions. Lubricate the slides with a silicone-based lubricant if necessary. Ensure drawers are not overloaded.
• Damaged Surface: For minor scratches, touch-up pens or furniture polish designed for wood can be used. For significant damage, professional repair may be required.

Specifications

Warranty Information

LEYAOYAO products are manufactured to high-quality standards. For specific warranty details regarding your console table, please refer to the documentation included with your purchase or contact LEYAOYAO customer support directly. Keep your proof of purchase for any warranty claims.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact LEYAOYAO customer support. Refer to the contact information provided in your product packaging or visit the official LEYAOYAO website for support options.