Baseus EH10 NC Bluetooth Headphones User Manual

Introduction

Welcome to your new Baseus EH10 NC Bluetooth Headphones. These over-ear headphones feature -45dB Hybrid Active Noise Cancellation, Hi-Res and LDAC audio support, 5 AI microphones for clear calls, and multi-point connectivity. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

Package Contents

• 1 x Baseus EH10 NC ANC Headphones
• 1 x Charging Cable (USB-C)
• 1 x User Manual (this document)

Product Overview

The Baseus EH10 NC headphones are designed for comfort and superior audio quality. Familiarize yourself with the physical components for ease of use.

The image displays the Baseus EH10 NC over-ear headphones in black, showcasing the earcups, headband, and general design. The left earcup typically features control buttons and a charging port.

The front of the product packaging for the Baseus EH10 NC headphones, highlighting key features such as -45dB ANC, 40mm dynamic drivers, CloudComfort, 80-hour battery life, and Hi-Res Audio certification.

The back of the product packaging, illustrating features like SuperBass 2.0, long-lasting playtime, and CloudComfort. It also includes regulatory information and contact details for support.

Setup

Charging the Headphones

The headphones come with a built-in rechargeable Lithium-Ion battery. Before first use, it is recommended to fully charge the headphones.

1. Connect the provided USB-C charging cable to the charging port on the headphones.
2. Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, computer USB port).
3. The indicator light will show charging status and turn off or change color when fully charged.

A full charge provides up to 80 hours of playtime with ANC disabled, or 55 hours with ANC enabled. A quick 10-minute charge can provide approximately 10 hours of playtime.

Bluetooth Pairing

To connect your headphones to a device via Bluetooth:

1. Ensure the headphones are powered off.
2. Press and hold the power button until the indicator light flashes rapidly, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "Baseus EH10 NC" from the list of detected devices.
5. Once connected, the indicator light will stop flashing and remain solid or turn off, depending on the model.

The headphones support Bluetooth 6.0 for stable wireless communication.

Operating Instructions

Active Noise Cancellation (ANC)

The Baseus EH10 NC headphones feature -45dB Hybrid Active Noise Cancellation to reduce ambient noise. This allows for a more focused listening experience.

• ANC On: Press the dedicated ANC button (or multi-function button, refer to specific button layout) to activate noise cancellation.
• Ambient Sound Mode: Press the ANC button again to switch to Ambient Sound Mode, which allows you to hear your surroundings while audio plays.
• ANC Off: Press the ANC button a third time to turn off all noise control modes.

Audio Playback

Use the control buttons on the earcup to manage your audio:

• Play/Pause: Single press the multi-function button.
• Next Track: Double press the multi-function button.
• Previous Track: Triple press the multi-function button.
• Volume Up/Down: Use the dedicated volume buttons.

These headphones support Hi-Res and LDAC audio, providing high-fidelity sound. SuperBass 2.0 technology enhances low frequencies for a richer bass experience.

Call Management

The headphones are equipped with 5 AI microphones and an ENC system for clear calls, even in noisy environments.

• Answer/End Call: Single press the multi-function button.
• Reject Call: Press and hold the multi-function button for approximately 2 seconds.

Multi-Point Connectivity

The Baseus EH10 NC supports multi-point connection, allowing you to connect to two devices simultaneously. This enables seamless switching between audio sources.

1. Pair the headphones with the first device as described in the "Bluetooth Pairing" section.
2. Once connected, temporarily disconnect Bluetooth on the first device.
3. Put the headphones back into pairing mode and pair them with the second device.
4. Reconnect Bluetooth on the first device. The headphones should now be connected to both devices.

Audio will switch automatically between devices based on active playback or incoming calls.

Maintenance

Cleaning

• Wipe the headphones with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, solvents, or strong chemicals, as these may damage the surface or internal components.
• Ensure no liquid enters the earcups, charging port, or microphone openings.

Storage

• Store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures.
• When not in use for extended periods, charge the battery periodically (e.g., once every three months) to maintain its lifespan.
• Avoid placing heavy objects on the headphones to prevent damage.

Troubleshooting

If you encounter issues with your Baseus EH10 NC headphones, refer to the following common solutions:

• No Power: Ensure the headphones are fully charged. Connect them to a power source and check the charging indicator.
• Cannot Pair: Make sure the headphones are in pairing mode (indicator flashing) and within 10 meters of your device. Turn off and on Bluetooth on your device, then try pairing again.
• No Sound: Check volume levels on both the headphones and your connected device. Ensure the headphones are correctly paired and selected as the audio output device.
• ANC Not Effective: Ensure the earcups form a good seal around your ears. Check that ANC is enabled and that you are in a suitable environment for noise cancellation.
• Call Quality Issues: Ensure the microphones are not obstructed. Move to an area with less background noise. Check your device's call settings.
• Intermittent Connection: Ensure there are no significant obstacles between the headphones and your device. Avoid environments with strong electromagnetic interference.

If the problem persists, try resetting the headphones (refer to the full product manual for specific reset instructions, if available) or contact customer support.

Specifications

Warranty and Support

For product support, warranty information, or technical assistance, please contact Baseus customer service using the details below. Please retain your proof of purchase for any warranty claims.

Global Support:

• Phone: +1 800 220 8056
• Email: care@baseus.com