Genérico Mic-w2p2

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Genérico Professional Wireless Microphone Kit (Mic-w2p2) User Manual

Introduction

This manual provides essential instructions for the safe and efficient operation of your Genérico Professional Wireless Microphone Kit (Model: Mic-w2p2). Please read this manual thoroughly before using the product and retain it for future reference.

The kit includes two wireless microphones with digital displays and a P2 receiver, designed for various audio applications such as karaoke, presentations, and live performances. It features rechargeable batteries, noise reduction technology, and a durable construction.

Safety Information

  • Do not expose the device to water or excessive moisture.
  • Avoid dropping or subjecting the microphones and receiver to strong impacts.
  • Use only the specified rechargeable batteries (18650 lithium) and charging cable.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
  • Keep out of reach of children.
  • Ensure proper ventilation when charging batteries.

Package Contents

Verify that all items listed below are included in your package:

  • 2 x Wireless Microphones
  • 1 x Wireless P2 Receiver
  • 3 x 18650 Lithium Rechargeable Batteries
  • 1 x USB Charging Cable
  • 2 x Anti-rolling Protections (silicone rings)
  • 1 x P2 to P10 Adapter (integrated with receiver)
Contents of the Genérico Professional Wireless Microphone Kit, including two rose gold microphones, a P2 receiver, three 18650 batteries, a USB charging cable, and two anti-rolling rings.
Figure 1: Package Contents. This image displays all components included in the microphone kit, such as the two microphones, the receiver, batteries, charging cable, and anti-rolling rings.

Product Overview

The Genérico Professional Wireless Microphone Kit consists of two handheld wireless microphones and a compact P2 receiver. Each microphone features a digital display for frequency and battery status, and is designed with noise reduction technology for clear audio.

Genérico Professional Wireless Microphone Kit showing two rose gold microphones with digital displays and a P2 receiver with an antenna.
Figure 2: Product Overview. This image shows the two wireless microphones and the P2 receiver, highlighting their rose gold finish and digital displays.

Microphone Features:

  • Digital Display: Shows frequency and battery level.
  • Noise Reduction: Incorporates windproof foam, protective cover, and high-fidelity coil.
  • Power Button: For turning the microphone on and off.
  • Battery Compartment: For 18650 lithium battery.
Diagram illustrating the noise reduction features of the microphone, including windproof foam, a protective cover, and a high-fidelity coil.
Figure 3: Noise Reduction Technology. This diagram details the internal components contributing to the microphone's clear audio, such as the windproof foam and high-fidelity coil.

Receiver Features:

  • P2 Output: For connecting to audio devices.
  • USB Charging Port: For recharging the receiver's internal battery.
  • Antenna: For stable wireless signal reception.

Setup

1. Charging Batteries

  1. Insert the three 18650 lithium batteries into the designated charging slots (if a separate charger is provided, otherwise charge via receiver/microphones if they have ports).
  2. Connect the USB charging cable to the receiver's charging port and a compatible USB power source (e.g., computer, USB wall adapter).
  3. Allow batteries to fully charge before first use. A full charge provides up to 6 hours of continuous operation.
Image showing a microphone with three 18650 lithium batteries, indicating up to 6 hours of continuous use.
Figure 4: Battery Life. This image highlights the 6-hour continuous usage provided by the included 18650 lithium batteries.

2. Inserting Batteries into Microphones

  1. Unscrew the bottom part of each microphone to access the battery compartment.
  2. Insert one charged 18650 lithium battery into each microphone, ensuring correct polarity (+/-).
  3. Screw the bottom part back onto the microphone securely.

3. Connecting the Receiver

  1. Plug the P2 receiver directly into the P2 input jack of your audio device (e.g., amplifier, mixer, karaoke machine, sound system).
  2. If your device has a P10 input, the receiver includes an integrated P2 to P10 adapter.
  3. Ensure the receiver is firmly connected.
Image showing the P2 receiver and a P2 to P10 adapter, illustrating compatibility with various audio devices like sound boxes, mixers, amplifiers, and karaoke systems.
Figure 5: Receiver Versatility. This image demonstrates how the P2 receiver, with an optional P10 adapter, connects to different audio equipment.

4. Powering On/Off

  • Receiver: The receiver typically powers on automatically when plugged into a powered P2 input. Some receivers may have a small power switch.
  • Microphones: Press and hold the power button on each microphone until the digital display illuminates.
  • To power off, press and hold the power button again until the display turns off.

Operating Instructions

1. Pairing and Channel Selection

The microphones and receiver are designed for automatic pairing. Once both are powered on, they should connect automatically. The digital display on the microphone will show the operating frequency (e.g., 630.65 MHz) and battery status.

This system utilizes UHF technology to ensure stable and clear audio transmission, allowing both microphones to be used simultaneously without interference.

Image showing two wireless microphones with digital displays, emphasizing the ability to use both simultaneously without interference due to UHF technology.
Figure 6: Dual Microphone Operation. This image illustrates the simultaneous use of both microphones, highlighting the stable connection provided by UHF technology.

2. Microphone Usage

  • Hold the microphone approximately 2-6 inches (5-15 cm) from your mouth for optimal sound capture.
  • Adjust the volume on your connected audio device (amplifier, mixer) as needed.
  • The built-in noise reduction features (windproof foam, protective cover, high-fidelity coil) work automatically to provide clear audio.
Image depicting two microphones with text indicating 'Crystal Sound Capture with Dynamic Pickup Technology' and 'Technology that reduces unwanted noise'.
Figure 7: Crystal Sound Capture. This image emphasizes the microphone's dynamic pickup technology and noise reduction capabilities for clear audio.

Maintenance

1. Cleaning

  • Wipe the microphones and receiver with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or harsh chemicals.
  • For the microphone grille, a slightly damp cloth can be used, ensuring no moisture enters the internal components.

2. Battery Care

  • Recharge batteries regularly, even if not in frequent use, to maintain their lifespan.
  • Avoid fully discharging the batteries repeatedly.
  • If storing the product for an extended period, remove the batteries from the microphones.

3. Storage

  • Store the kit in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Use the original packaging or a protective case for transport and storage to prevent damage.

Troubleshooting

ProblemPossible CauseSolution
No sound from microphone
  • Microphone not powered on.
  • Receiver not connected or powered.
  • Low microphone battery.
  • Audio device volume too low.
  • Microphone and receiver not paired.
  • Press and hold microphone power button.
  • Ensure receiver is plugged in and audio device is on.
  • Recharge or replace microphone battery.
  • Increase volume on audio device.
  • Power cycle both microphone and receiver.
Intermittent sound or static
  • Interference from other wireless devices.
  • Microphone too far from receiver.
  • Low battery.
  • Move away from other wireless devices.
  • Reduce distance between microphone and receiver.
  • Recharge batteries.
Microphone display not working
  • Low or dead battery.
  • Microphone not powered on.
  • Recharge or replace battery.
  • Press and hold power button.

Specifications

FeatureDetail
ModelMic-w2p2
BrandGenérico
Microphone TypeWireless, Dynamic
Number of Microphones2
Connectivity TechnologyWireless (UHF), P2 Receiver
Power Source3 x 18650 Lithium Rechargeable Batteries
Battery LifeUp to 6 hours (continuous use)
Special FeaturesRechargeable Battery, Digital Display, Windproof Foam, Noise Reduction, Crystal Audio
Compatible DevicesAmplifiers, P2 Input Devices, Karaoke Systems, Sound Systems
ColorRose Gold
MaterialMetal, Plastic
Microphone Dimensions (each)19 x 8 x 29 cm
Kit Weight710 Grams
Polar PatternUnidirectional
Anatel Certification11939-22-13692

Warranty and Support

This product comes with a manufacturer's warranty of 3 months from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions.

For warranty claims, technical support, or inquiries, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty validation.

Do not attempt to repair the product yourself, as this may void the warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.