Introduction
Thank you for choosing the Elitech TM-2TH Digital Thermometer Hygrometer. This device is designed for precise monitoring of temperature and humidity in various environments, including refrigerators, freezers, wine cabinets, and more. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.
Product Features
The Elitech TM-2TH offers precision monitoring with a temperature range of -10°C to 50°C and a humidity range of 10% to 95% RH. It features ultra-long battery life, flexible installation options, and a °C/°F toggle function.
This device provides high accuracy with ±1°C temperature accuracy and ±5% RH precision (within 30%~85% RH range), ensuring reliable readings for critical environments.
The TM-2TH automatically records and displays maximum and minimum temperature and humidity values, allowing users to track environmental fluctuations over time.
Designed for versatility, the thermometer hygrometer can be installed in three ways: hanging via its integrated hook, standing on a flat surface, or magnetically attached to metal surfaces.
The TM-2TH is suitable for a wide range of applications, including monitoring conditions in wine cabinets, medicine cabinets, refrigerators, camping boxes, and baby's fridges.
Specifications
| Model | TM-2TH |
| Temperature Range | -10°C to 50°C (14°F to 122°F) |
| Temperature Accuracy | ±1°C (±1.8°F) |
| Humidity Range | 10% to 95% RH |
| Humidity Accuracy | ±5% RH (within 30%~85% RH) |
| Battery Type | 1 x CR2032 (included) |
| Product Reference | TM-2TH-2Pack |
| Package Dimensions (approx.) | 15.4 x 9.5 x 6.5 cm |
| Package Weight (approx.) | 90 grams |
| Country of Origin | China |
Setup
1. Battery Installation
- Locate the battery compartment cover on the back of the device.
- Open the cover by sliding or gently prying it off.
- Insert one CR2032 battery, ensuring the positive (+) side faces upwards.
- Replace the battery compartment cover securely. The device should power on automatically and display current temperature and humidity.
2. Placement
The TM-2TH offers multiple placement options:
- Standing: Use the integrated kickstand to place the device on any flat surface.
- Hanging: Utilize the built-in hook to hang the device from a rack or hook.
- Magnetic: Attach the device to any metallic surface, such as a refrigerator door, using its magnetic backing.
Choose a location that provides accurate readings for the area you wish to monitor, avoiding direct sunlight or heat sources.
Operating Instructions
1. Reading Display
Upon activation, the device will display the current temperature and relative humidity. The temperature is typically shown in degrees Celsius (°C) or Fahrenheit (°F), and humidity as a percentage (%).
2. Switching Temperature Units (°C/°F)
Locate the °C/°F button, usually on the back or side of the device. Press this button to toggle between Celsius and Fahrenheit temperature units.
3. Viewing MAX/MIN Records
The device automatically records the highest (MAX) and lowest (MIN) temperature and humidity values since the last reset. To view these records:
- Press the MAX/MIN button once to display the maximum recorded values.
- Press the MAX/MIN button again to display the minimum recorded values.
- Press it a third time to return to the current temperature and humidity display.
4. Resetting MAX/MIN Records
To clear the recorded MAX/MIN values and start a new recording cycle:
- While viewing the MAX or MIN records, press and hold the MAX/MIN button for approximately 3 seconds.
- The display will flash, indicating that the records have been reset to the current temperature and humidity.
Maintenance
1. Battery Replacement
When the display becomes dim or the device stops functioning, it is time to replace the CR2032 battery. Follow the battery installation steps in the "Setup" section to replace the battery.
2. Cleaning
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water. Ensure the sensor openings are free from dust and debris for accurate readings.
3. Storage
If the device will not be used for an extended period, remove the battery to prevent leakage and store it in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display or dim display | Battery is dead or incorrectly installed. | Replace the CR2032 battery or ensure it is installed with correct polarity. |
| Inaccurate readings | Sensor blocked or device placed near heat/cold source. | Ensure sensor openings are clear. Relocate the device to a more representative area. Allow time for readings to stabilize. |
| MAX/MIN values not resetting | Button not held long enough. | Press and hold the MAX/MIN button for at least 3 seconds until the display flashes. |
Warranty and Support
Elitech provides a standard warranty for its products. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Elitech website. Please retain your proof of purchase for warranty claims.
Official Elitech Website: www.elitechlog.com