JEEOHEY 54"W Convertible Sleeper Sofa Bed Instruction Manual

Introduction

The JEEOHEY 3-in-1 convertible sleeper sofa bed offers a space-saving and compact design, functioning as a loveseat sofa or chaise lounge during the day and easily converting into a sleeper bed at night. This manual provides detailed instructions for assembly, operation, and maintenance to ensure safe and optimal use of your product.

Important Safety Information

Please read and understand all safety warnings before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Always follow the assembly instructions carefully. Ensure all parts are correctly installed and tightened before use.
• Keep the sofa bed away from open flames or high heat sources to prevent fire hazards.
• Supervise children and pets to avoid entrapment risks or injury during conversion.
• Do not use the sofa bed if any parts are damaged or missing. Contact customer support for replacement parts.
• Ensure adequate clearance around the sofa bed when converting between modes to prevent obstruction or damage.
• Do not exceed the maximum weight capacity of 500 pounds.

Product Features

• 3-in-1 Convertible Design: Easily transforms from a loveseat sofa to a chaise lounge or a full sleeper bed using assistive hand straps and a sliding mechanism.
• 3-Level Adjustable Backrest: Customize your comfort with backrest angles of 105°, 138°, and 180° for sitting, lounging, or sleeping.
• Integrated Charging Ports: Equipped with 1 USB charging port and 1 Type C charging port for convenient device charging.
• 90° Rotating Side Table: A practical side table provides a flat surface for drinks, devices, or books, and can be rotated for optimal positioning.
• Premium Materials: Upholstered in soft, skin-friendly corduroy fabric with high-density foam and curved springs for superior support and comfort.
• Durable Construction: Features a high-quality plywood and metal frame, ensuring sturdiness and a maximum load-bearing capacity of 500 lbs.

Setup and Assembly

The sofa bed requires simple assembly. All necessary hardware and instructions are included. Please follow the steps below carefully.

1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the parts list are present.
2. Assemble Sofa Legs: Attach the sofa legs to the designated points on the base frame. Ensure they are securely tightened.
3. Attach Stoppers: Secure the stoppers to the base as indicated in the diagram to prevent unwanted movement.
4. Connect Backrest and Seat: Align the backrest with the main seat frame and secure them using the provided hardware. Ensure a firm connection.
5. Install Handrails: Attach the left and right handrails to the main frame, ensuring all screws are tightened.
6. Final Checks: Double-check all connections and ensure the sofa bed is stable before use.

Visual Assembly Steps

Image: All components of the sofa bed laid out before assembly.

Image: Detailed dimensions of the sofa in both sofa and bed configurations.

Operating Instructions

Converting from Sofa to Bed Mode:

1. Remove Pillows: Take off any throw pillows or back cushions from the sofa.
2. Pull Out Bed: Locate the two assistive hand straps at the front of the sofa. Firmly pull these straps to extend the hidden bed frame outwards. The sliding mechanism will guide the bed into position.
3. Lower Backrest: Adjust the backrest to a flat (180°) position to complete the bed surface.

Adjusting the Backrest:

The backrest can be adjusted to three different angles: 105° (upright), 138° (reclined), and 180° (flat). To adjust, gently push the backrest forward until you hear a click, then recline it to your desired position. Repeat the process to change angles.

Image: Visual representation of the three adjustable backrest levels.

Using USB Charging Ports and Side Table:

The sofa bed is equipped with a USB-A and a Type-C charging port located on the side armrest. Simply plug in your electronic devices for convenient charging. The integrated side table can be rotated 90 degrees to provide a stable surface for your items.

Image: Close-up view of the USB charging ports and the 90-degree rotating side table.

Maintenance

• Regular Cleaning: Vacuum the corduroy fabric regularly using a soft brush attachment to remove dust and debris.
• Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Use a mild fabric cleaner for stubborn stains, testing on an inconspicuous area first.
• Avoid Harsh Chemicals: Do not use abrasive cleaners or harsh chemicals, as these can damage the fabric and frame.
• Protect from Sunlight: Prolonged exposure to direct sunlight can cause fading. Position the sofa bed away from direct sun or use curtains/blinds.
• Check Connections: Periodically check and tighten all screws and bolts to ensure the stability and safety of the frame.

Troubleshooting

• Difficulty Converting: Ensure all pillows are removed and the mechanism is free of obstructions. Apply gentle, even pressure when pulling the straps.
• Unstable Frame: Check all assembly screws and bolts. Tighten any loose connections. Ensure the sofa is on a flat, even surface.
• Backrest Not Adjusting: Verify that the backrest mechanism is clear of debris. Gently push forward until it clicks before reclining.
• USB Ports Not Working: Ensure the power cable for the USB ports is securely plugged into a working wall outlet. Check device cables for damage.
• Squeaking Noises: Apply a small amount of silicone lubricant to moving metal parts of the conversion mechanism if squeaking occurs.

Specifications

Warranty and Support

For warranty information, replacement parts, or technical assistance, please contact JEEOHEY customer support through the retailer where the product was purchased. Please have your purchase receipt and product model number ready when contacting support.