FMS 1/7 Ford Bronco RTR EB RC Truck Instruction Manual

1. Introduction

Welcome to the world of high-performance remote control vehicles with your new EAZYRC FMS 1/7 Ford Bronco RTR EB RC Truck. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your vehicle. Designed for enthusiasts, this 4WD brushless RC truck offers speeds up to 80km/h, featuring a licensed Ford Bronco Baja 1000 design, robust CNC metal parts, and advanced stability systems for an exceptional off-road experience.

Please read this manual thoroughly before operating your RC truck to ensure proper setup and to maximize its performance and longevity.

Image: The FMS 1/7 Ford Bronco RTR EB RC Truck, showcasing its detailed exterior and aggressive stance.

2. Safety Information

Operating remote control vehicles requires attention to safety. Adhere to the following guidelines to prevent injury or damage:

• For external use only: This product is designed for outdoor use in open, clear areas.
• Age Recommendation: Recommended for users 16 years and up. Adult supervision is advised for younger operators.
• Avoid Public Roads: Never operate the RC truck on public roads, near pedestrians, or in crowded areas.
• Maintain Distance: Keep a safe distance from people, pets, and obstacles while operating.
• Battery Safety: Always use recommended batteries and chargers. Follow all battery charging and handling instructions to prevent fire or explosion. Disconnect batteries when not in use.
• Water and Moisture: While the ESC is waterproof, avoid submerging the vehicle. Electronic components can be damaged by excessive moisture.
• Inspect Before Use: Always check the vehicle for loose parts, damaged components, or obstructions before each use.
• Proper Storage: Store the RC truck and its components in a cool, dry place away from direct sunlight and extreme temperatures.

3. Package Contents

Upon unpacking, verify that all items listed below are present:

• RC Truck (1 unit)
• 2.4GHz Remote Control (1 unit)
• Product Manual (1 unit)
• Wrench (1 unit)
• Screwdriver (1 unit)

Note: Batteries for the vehicle and remote control are not included and must be purchased separately.

Image: Visual representation of the FMS 1/7 Ford Bronco RTR EB RC Truck and its standard package contents.

4. Setup

4.1. Battery Installation (Vehicle)

1. Ensure the vehicle's power switch is in the "OFF" position.
2. Locate the battery compartment, typically on the chassis.
3. Carefully connect your charged 6S LiPo battery (not included) to the ESC connector. Ensure correct polarity.
4. Secure the battery within the compartment using the provided straps or clips.
5. Close the battery compartment cover.

4.2. Remote Control Battery Installation

1. Open the battery cover on the back of the remote control.
2. Insert the required batteries (e.g., AA batteries, not included) according to the polarity markings.
3. Close the battery cover securely.

4.3. Pairing the Remote Control and Vehicle

1. Turn on the remote control first.
2. Then, turn on the vehicle's power switch.
3. The indicator lights on both the remote and vehicle receiver should show a solid light, indicating a successful connection. Refer to the remote control's specific manual for detailed pairing instructions if issues arise.

5. Operating Instructions

5.1. Basic Controls

• Steering Wheel: Turn left or right to control the vehicle's direction.
• Throttle Trigger: Pull to accelerate forward, push to brake or reverse.
• Trim Adjustments: Use the steering trim and throttle trim dials on the remote to fine-tune the vehicle's straight-line tracking and neutral throttle position.

5.2. Driving Tips

• Start Slowly: Begin with gentle throttle inputs to get a feel for the vehicle's response.
• Terrain: The FMS Ford Bronco is designed for off-road use. It performs well on dirt, sand, and rocky terrain. Avoid deep water or extremely muddy conditions.
• High-Speed Stability: The front independent suspension and rear solid axle, combined with the dual stability system (rear sway bar and adjustable gyro), provide excellent control even at speeds up to 80km/h.
• Gyro Adjustment: The independent receiver with gyroscope can be adjusted via the transmitter to enhance stability, especially during high-speed maneuvers or on uneven surfaces. Refer to your remote control manual for specific adjustment procedures.

Image: The FMS 1/7 Ford Bronco RTR EB in motion, highlighting its powerful brushless motor and 150A ESC for high-speed performance.

Image: The remote control and the vehicle's independent receiver with gyroscope, illustrating the stability control system.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your RC truck.

• Cleaning: After each use, especially in dusty or dirty conditions, clean the vehicle. Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and motor area. Avoid using water directly on electronics.
• Inspection: Regularly check for loose screws, damaged parts, or worn tires. Pay attention to the CNC metal gears, differentials, and oil-filled aluminum shocks for any signs of wear or leakage.
• Lubrication: Apply appropriate RC-specific lubricants to moving parts like universal joints and gearboxes as needed. Consult advanced user guides for detailed lubrication points.
• Shock Absorbers: Inspect the heavy-duty oil-filled aluminum shocks for proper function and oil levels. Refill or replace shock oil if performance degrades.
• Storage: When not in use, store the vehicle with batteries disconnected in a cool, dry place.

7. Troubleshooting

This section addresses common issues you might encounter with your FMS 1/7 Ford Bronco RTR EB RC Truck.

If you encounter issues not covered here, please contact customer support for assistance.

8. Specifications

Image: Dimensional overview of the FMS 1/7 Ford Bronco RTR EB RC Truck.

9. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. For technical support, parts, or service inquiries, please contact EAZYRC customer service through their official website or the contact information provided in your purchase documentation.

Always provide your product model number (1/7 Ford Bronco RTR EB) and purchase date when seeking support.