1. Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your roborock Side Brushes Replacement (Type B). These brushes are designed to maintain the optimal cleaning performance of your compatible roborock robot vacuum cleaner.
2. Compatibility
The roborock Side Brushes Replacement (Type B) are compatible with the following roborock robot vacuum cleaner series:
- S8 Pro Ultra
- S7 Max Ultra
- Roborock Qrevo
- Roborock Qrevo Slim
- S7 MaxV / S7
- Q7 Max / Q8 Max / Q7 / Q5
- S6 / S5 / S4
- E Series (E5 / E4 / E3 / E2)
3. Package Contents
Your package should contain the following items:
- 2 x roborock Side Brushes (Type B)
Image: The package includes two roborock Side Brushes, as shown next to the product box.
4. Setup and Installation
Follow these steps to replace the side brushes on your roborock robot vacuum cleaner:
- Power Off: Ensure your robot vacuum cleaner is powered off before beginning installation.
- Access the Underside: Carefully turn the robot vacuum cleaner upside down to access the side brush.
- Remove Old Brush: Locate the screw holding the existing side brush in place. Use a small screwdriver to unscrew and remove the old side brush.
- Install New Brush: Align the new roborock Side Brush (Type B) with the designated slot. Ensure the brush is properly seated.
- Secure New Brush: Use the screw removed in step 3 to secure the new side brush. Tighten the screw gently but firmly.
- Verify Installation: Once installed, ensure the brush can rotate freely without obstruction.
Image: View of the robot vacuum's underside, indicating the location for side brush installation.
5. Operating Principles
The roborock Side Brushes are designed to enhance the cleaning efficiency of your robot vacuum. Their primary function is to sweep debris from edges and corners into the main suction path of the vacuum cleaner.
- Edge Cleaning: When the robot vacuum operates along walls and in corners, the side brush accelerates to approximately 330 RPM to effectively dislodge and collect dirt.
- Open Area Cleaning: In open areas, the brush slows to approximately 130 RPM. This controlled speed helps guide dirt towards the main brush and suction inlet, preventing debris from being scattered into already clean zones.
- Tangle Reduction: Crafted from durable nylon, these brushes are designed to minimize hair tangles, contributing to a more consistent and hassle-free cleaning experience.
Image: A pair of roborock Side Brushes (Type B).
6. Maintenance
Regular maintenance of your side brushes ensures optimal performance and extends the lifespan of your robot vacuum cleaner.
- Regular Inspection: Periodically check the side brushes for wear, damage, or accumulated hair and debris.
- Cleaning: If hair or debris is tangled around the brush arms or base, carefully remove it. A small pair of scissors can be used to cut tangled hair if necessary, taking care not to damage the brush or the vacuum.
- Replacement: Side brushes are consumable parts and will wear down over time. Replace them when bristles show significant wear, are bent, or if cleaning performance noticeably decreases. The replacement frequency depends on usage and environment.
7. Troubleshooting
If you encounter issues with your side brushes, consider the following:
- Brush Not Spinning: Ensure the brush is securely installed and the screw is tightened. Check for any obstructions or excessive tangles preventing rotation.
- Reduced Cleaning Performance: Inspect the brushes for wear. Worn or damaged bristles will be less effective at sweeping. Replace the brushes if they are significantly worn.
- Unusual Noise: Remove the brush and check for any foreign objects lodged in the brush mechanism or motor. Reinstall the brush correctly.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | roborock |
| Model Name | Side Brushes |
| Type | Type B |
| Special Feature | Lightweight |
| Color | Black |
| Product Dimensions | 4.57"L x 4.56"W x 2"H |
| Included Components | Side Brush*2 |
| Item Weight | 2.89 ounces |
| Manufacturer | Roborock |
9. Support
For further assistance or if you have any questions regarding your roborock Side Brushes, please contact roborock customer support. It is recommended to purchase replacement parts directly from the official Roborock store or authorized retailers to ensure compatibility and product quality.
