CIUZL NF

CIUZL Dog Training Collar User Manual

Model: NF

Introduction

This manual provides detailed instructions for the safe and effective use of your CIUZL Dog Training Collar. Please read this manual thoroughly before operating the device to ensure proper training and the well-being of your dog. This system is designed to assist in training up to two dogs simultaneously.

Important Safety Information

WARNING: Not for aggressive dogs. Do not use this product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs could cause severe injury to their owner or others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or a certified trainer.

  • This training collar is intended for healthy dogs only.
  • Do not leave the collar on your dog for more than 12 hours per day.
  • Avoid prolonged skin contact with the contact points.
  • Regularly check your dog's neck for signs of irritation or sores.
  • The Safety Shock mode should be used as a last resort and only after other modes have been attempted. Always start with the lowest effective level.
  • Keep out of reach of children.

Package Contents

  • Remote Transmitter
  • 2 x Receiver Collars
  • 2 x Adjustable Nylon Collars
  • 2 x Short Contact Probes
  • 2 x Long Contact Probes
  • 2 x Conductive Silicone Sleeves
  • USB Charging Cable
  • User Manual

Product Overview

Remote Transmitter

The remote transmitter features an LCD display, mode buttons, intensity level adjustments, and a channel selection button for controlling up to two receiver collars.

Receiver Collar

The receiver collar is IP67 waterproof and includes contact points, a charging port, and LED indicators. It is designed to be lightweight and comfortable for your dog.

Adjustable CIUZL Dog Training Collar with receiver and remote, showing collar length and probe sizes.

Image: The adjustable collar band and receiver unit, illustrating the different probe sizes and the safety lock mechanism. The image also shows various dog sizes from 10 lbs to 120 lbs, indicating suitability for a wide range of breeds.

Setup

1. Charging the Devices

Before first use, fully charge both the remote transmitter and the receiver collars for 4 hours. Subsequent charges typically take 2 hours.

  • Connect the USB charging cable to the charging port on the remote and receiver.
  • Plug the other end into a power adapter, mobile power bank, or laptop USB port.
  • The indicator light will show charging status (e.g., red for charging, green for full).
CIUZL Dog Training Collar remote and receiver charging via USB cable.

Image: The remote transmitter and receiver collar connected to a USB charging cable, illustrating the quick charge capability and long battery life. Icons below show compatibility with power banks, car chargers, laptops, and wall adapters.

2. Attaching the Contact Probes and Silicone Sleeves

Select the appropriate contact probes based on your dog's fur length:

  • Short Probes: Suitable for short-haired dogs.
  • Long Probes: Suitable for dogs with long or dense hair.

Screw the chosen probes onto the receiver collar. For added comfort and protection, place the conductive silicone sleeves over the contact probes.

3. Fitting the Receiver Collar

Proper fit is crucial for effectiveness and comfort:

  • Place the receiver collar around your dog's neck so that the contact points are underneath, touching the skin.
  • The collar should be snug, but not too tight. You should be able to fit one finger comfortably between the collar and your dog's neck.
  • Adjust the nylon strap to fit neck circumferences from 6 to 26 inches.
  • Ensure the collar is positioned high on the neck, close to the ears, for best contact.

4. Pairing the Remote and Receiver (If necessary)

Your devices may come pre-paired. If not, or if you need to re-pair, follow these steps:

  • Turn on the remote transmitter.
  • Select the desired channel (Dog 1 or Dog 2) using the channel button.
  • With the receiver collar turned off, press and hold the power button on the receiver until the indicator light flashes rapidly.
  • Within 10 seconds, press any mode button (Beep, Vibration, or Shock) on the remote.
  • The receiver's indicator light will stop flashing and remain solid, indicating successful pairing.
  • Repeat for the second receiver collar if applicable, selecting the other channel.

Operating the Training Collar

Training Modes

The CIUZL Dog Training Collar offers three primary training modes and a light mode:

CIUZL Dog Training Collar showing Beep, Vibration, and Safety Shock modes with their respective levels.

Image: A visual representation of the three effective training modes: Beep (1-8 levels), Vibration (1-16 levels), and Safe Shock (1-16 levels). The image also depicts a dog being trained and examples of behaviors to correct such as barking, digging, fighting, chewing, and chasing.

  • Beep Mode (Level 1-8): Emits an audible tone. This is often used as a warning or for positive reinforcement.
  • Vibration Mode (Level 1-16): Delivers a non-harmful vibration. Useful for getting your dog's attention or as a mild deterrent.
  • Safety Shock Mode (Level 1-16): Provides a static stimulation. This mode should be used cautiously and only when necessary, starting at the lowest effective level.
  • Light Mode: The collar features two light modes for visibility and tracking.
    • Flashing Light: Helps locate your dog in low-light conditions or at night.
    • Constant White Light: Provides illumination, useful for night walks or finding objects.
CIUZL Dog Training Collar showing flashing and solid white light modes for night visibility.

Image: A dog and owner walking at night, demonstrating the two safety anti-lost light modes: flashing light and constant white light. The image highlights how these lights aid in easily finding and locating dogs in the dark.

Adjusting Intensity Levels

Use the intensity buttons on the remote to increase or decrease the level for Beep, Vibration, and Safety Shock modes. Always start at the lowest level and gradually increase until your dog responds.

Remote Range

The remote control has an extended range of up to 3300 feet (1000 meters), allowing for training in various environments such as backyards, parks, or beaches.

CIUZL Dog Training Collar remote range up to 3300 feet.

Image: A golden retriever lying in a large backyard, with an overlay indicating an "Up to 3300ft Remote Range" for training indoors and outdoors.

Training Tips

  • Consistency is Key: Use the collar consistently with commands.
  • Positive Reinforcement: Always pair corrections with positive reinforcement when your dog performs the desired action.
  • Short Sessions: Keep training sessions short and positive (10-15 minutes).
  • Supervision: Never leave your dog unsupervised with the training collar on.
  • Start Low: Begin with the lowest effective stimulation level and only increase if necessary.
  • Water Activities: The receiver collar is IP67 waterproof, allowing your dog to play in water. However, the remote is only splash-proof and should be kept away from water.
CIUZL Dog Training Collar receiver is IPX7 waterproof, suitable for swimming and bathing.

Image: A dog splashing in water, illustrating the IPX7 waterproof design of the receiver collar, making it suitable for activities like splashing, swimming, bathing, and use in rainy conditions.

Maintenance

  • Cleaning: Wipe the receiver collar and remote with a damp cloth. Do not use harsh chemicals.
  • Contact Points: Regularly check and clean the contact points to ensure proper function and prevent skin irritation.
  • Strap: Inspect the nylon strap for wear and tear. Replace if damaged.
  • Storage: Store the device in a cool, dry place when not in use.
  • Battery Care: Recharge the devices regularly, even if not in frequent use, to maintain battery health.

Troubleshooting

Problem Possible Solution
Collar not working / No response
  • Check battery levels of both remote and receiver. Recharge if necessary.
  • Ensure the collar is turned on.
  • Verify the remote and receiver are properly paired.
  • Adjust collar fit to ensure contact points touch the dog's skin.
  • Check for damage to contact points or wiring.
Dog not responding to stimulation
  • Increase the intensity level gradually.
  • Ensure contact points are making good skin contact. Use longer probes if your dog has thick fur.
  • Check for skin irritation under the contact points.
Remote range is reduced
  • Ensure there are no large obstacles (e.g., metal structures, thick walls) between the remote and receiver.
  • Check battery levels. Low battery can affect range.
  • Avoid holding the remote in a way that obstructs the antenna.
Skin irritation on dog's neck
  • Remove the collar immediately.
  • Clean the dog's neck and the collar's contact points.
  • Allow the skin to heal completely before re-applying.
  • Ensure proper fit and consider using the silicone sleeves for comfort.
  • Do not leave the collar on for more than 12 hours a day.

Specifications

  • Model: NF
  • Remote Range: Up to 3300 feet (1000 meters)
  • Waterproof Rating (Receiver): IP67 (Submersible up to 1 meter for 30 minutes)
  • Waterproof Rating (Remote): Splash-proof
  • Battery Type: Built-in rechargeable Lithium battery
  • Charging Time: 2 hours (4 hours for first charge)
  • Standby Time (Receiver): Up to 15 days
  • Standby Time (Remote): Up to 45 days
  • Dog Size Compatibility: 8 - 120 lbs
  • Neck Circumference: 6 - 26 inches
  • Training Modes: Beep (1-8 levels), Vibration (1-16 levels), Safety Shock (1-16 levels), Light Mode (Flashing, Constant White)

Warranty and Support

Your CIUZL Dog Training Collar comes with a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact CIUZL customer support.

If you encounter any issues or have questions regarding your product, please contact our customer support team. Contact information can typically be found on the product packaging or the official CIUZL website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.