1. Product Overview
The VGR 119 Professional Cordless Hair Clippers are designed for precise hair cutting and grooming. This device features a powerful BLDC motor and durable ceramic blades with DLC coating, offering consistent performance for various hair types. It is equipped with a long-lasting lithium-ion battery and supports dual charging methods for convenience.
Key Features:
- Powerful BLDC Motor: Delivers up to 8000 RPM for stable and efficient cutting.
- Precision Ceramic Blades with DLC Coating: Ensures durability, low heat generation, and snag-free grooming.
- Long-Lasting Battery: 2500mAh lithium battery provides up to 180 minutes of use after a 3.5-hour charge.
- Dual Charging Modes: Charge via USB cable or the included charging dock.
- Adjustable Taper Lever: Allows for length control from 0.8mm to 2mm.
- LED Display: Shows real-time battery status.
Package Contents:
- 1 x VGR 119 Professional Cordless Hair Clipper
- 6 x Guide Combs (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
- 1 x Charging Dock
- 1 x Bottle of Blade Oil
- 1 x Cleaning Brush
- 1 x USB Charging Cable
Image: The VGR 119 Professional Cordless Hair Clipper in Gold, showcasing its sleek design.
2. Safety Instructions
To ensure safe operation and prevent injury or damage, please read and follow these safety guidelines:
- Avoid using the device near water or in wet environments.
- Do not allow children to play with the hair trimmer. Keep the device out of reach of children.
- Always ensure the device is switched off before cleaning or performing maintenance.
- Use only the provided charging cable and dock.
- Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
- Keep the blades clean and oiled to maintain optimal performance and prevent irritation.
- If the device shows signs of damage or malfunction, discontinue use immediately.
3. Setup
3.1 Initial Charging
- Before first use, fully charge the hair clipper.
- Connect the USB charging cable to the clipper or place the clipper in the charging dock.
- Plug the USB cable into a compatible USB power adapter (not included).
- The LED display will indicate the battery charging status. A full charge takes approximately 3.5 hours.
Image: The VGR 119 Hair Clipper shown on its charging base, highlighting its 2500mAh battery, 3.5-hour charging time, and 180 minutes of use time.
3.2 Attaching Guide Combs
- Ensure the clipper is turned off.
- Select the desired guide comb (1.5mm, 3mm, 4.5mm, 6mm, 9mm, or 12mm).
- Align the comb with the clipper blade and push it firmly until it clicks into place.
- To remove, gently pull the comb away from the blade.
Image: A display of the six metal guide combs (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm) included with the VGR 119 Hair Clipper.
4. Operating Instructions
4.1 Powering On/Off
- Press the ON/OFF button to turn the clipper on. The LED display will illuminate.
- Press the ON/OFF button again to turn the clipper off.
4.2 Adjusting Blade Length (Taper Lever)
- The adjustable taper lever on the side of the clipper allows for fine-tuning of cutting lengths between 0.8mm and 2mm without a guide comb.
- Move the lever up for a shorter cut and down for a longer cut.
Image: The VGR 119 Hair Clipper illustrating the 5-level adjustable taper lever for precision cutting from 0.8mm to 2mm.
4.3 Hair Cutting Tips
- For best results, ensure hair is clean and dry before cutting.
- Comb the hair in the direction of growth to remove tangles.
- Start with a longer guide comb and gradually switch to shorter ones if a closer cut is desired.
- Hold the clipper flat against the head and move it slowly against the direction of hair growth.
- Overlap strokes to ensure an even cut.
5. Maintenance
5.1 Cleaning the Blades
- Turn off the clipper and detach any guide comb.
- Use the provided cleaning brush to remove loose hair from the blades.
- For a more thorough cleaning, the blades can be carefully removed (refer to the detailed instructions in the physical manual for blade removal).
5.2 Oiling the Blades
- After cleaning, apply a few drops of the included blade oil to the teeth of the blades.
- Turn the clipper on for a few seconds to allow the oil to distribute evenly.
- Wipe off any excess oil with a soft cloth.
- Regular oiling (after every few uses) helps maintain blade sharpness and smooth operation.
5.3 Storage
- Store the clipper in a dry, cool place, away from direct sunlight and moisture.
- Ensure the clipper is fully charged before long-term storage to preserve battery life.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on. | Low battery or no charge. | Charge the clipper fully. |
| Poor cutting performance or pulling hair. | Blades are dull, dirty, or not oiled. | Clean and oil the blades. If blades are dull, consider replacement. |
| Clipper gets hot during use. | Extended use or dirty/un-oiled blades. | Clean and oil blades. Allow the clipper to cool down. |
| Unusual noise during operation. | Blades may be misaligned or require oiling. | Check blade alignment and oil the blades. |
7. Specifications
- Model: YS-V119-Gold
- Motor: BLDC Motor, 8000 RPM
- Blade Material: Ceramic with DLC Coating
- Battery: 2500mAh Lithium-ion
- Charging Time: Approximately 3.5 hours
- Usage Time: Up to 180 minutes
- Power Source: Battery Powered (Cordless)
- Charging Interface: USB Type-C
- Product Dimensions: 27.8 x 23.7 x 6 cm
- Item Weight: 1.04 Kilograms
- Special Features: Cordless, Fast Charge, LED Display, Rechargeable
Image: The VGR 119 Hair Clipper highlighting its powerful 8000 RPM BLDC motor for smooth hair cutting.
8. Warranty and Support
VGR provides a 1-year warranty for the VGR 119 Professional Cordless Hair Clippers from the date of purchase. For any product inquiries, technical assistance, or warranty claims, please contact VGR customer support. We offer 24-hour support to assist you with any issues.
Please retain your proof of purchase for warranty validation.
Image: VGR customer support details, emphasizing 1-year warranty and 24-hour support.