MLEEDA KVM Switch 3 Monitors 3 Computers 8K@60Hz User Manual

1. Introduction

The MLEEDA KVM Switch is designed to allow three computers to share a single set of keyboard, mouse, and three monitors. It supports extended and mirrored display modes, offering resolutions up to 8K@60Hz for HDMI and 8K@30Hz/4K@144Hz for DisplayPort. The device includes four integrated USB 3.0 ports for high-speed data transmission and peripheral sharing.

Image 1: Overview of the KVM Switch setup with three monitors.

2. Package Contents

Verify that all items are present in the package:

• 1x MLEEDA KVM Switch (3 monitors, 3 computers)
• 3x USB 3.0 Cables (1.5m)
• 1x Wired Remote (1.5m)
• 1x 12V Power Adapter
• 1x User Manual

Image 2: Contents included in the MLEEDA KVM Switch package.

3. Setup Instructions

Proper connection of all cables is essential for optimal performance. Each PC requires specific video and USB connections to the KVM switch.

3.1. Cable Requirements per PC

For each PC (up to 3 PCs), you will need to connect the following cables to the KVM switch:

• 1x HDMI cable (for one monitor output)
• 2x DisplayPort cables (for two additional monitor outputs)
• 1x USB 3.0 cable (for keyboard, mouse, and other USB peripherals)

Note: If your PC does not have the required 1 HDMI + 2 DisplayPort outputs, adapters (e.g., DP to HDMI, Mini DP to DP, USB-C to DP/HDMI) or a USB-C docking station may be necessary. Ensure all cables are of high quality and support the desired resolution (e.g., 8K DP1.4 and HDMI 2.1 cables for 8K resolution).

3.2. Connecting PCs to the KVM Switch

1. Connect the 1 HDMI, 2 DisplayPort, and 1 USB 3.0 cables from PC1 to the corresponding 'INPUT 1' ports on the KVM Switch.
2. Repeat step 1 for PC2, connecting to the 'INPUT 2' ports.
3. Repeat step 1 for PC3, connecting to the 'INPUT 3' ports.

3.3. Connecting Monitors to the KVM Switch

1. Connect your first monitor to 'OUT A' (HDMI).
2. Connect your second monitor to 'OUT B' (DisplayPort).
3. Connect your third monitor to 'OUT C' (DisplayPort).

3.4. Connecting Peripherals and Power

1. Connect your keyboard, mouse, printer, USB flash drive, or other USB 3.0 devices to the 4 USB 3.0 ports on the front of the KVM Switch.
2. Connect the wired remote control to the dedicated port on the front panel.
3. Connect the 12V DC power adapter to the KVM Switch and plug it into a power outlet. This is recommended for stable operation, especially when using high-power USB devices like hard drives or webcams.

Image 3: Detailed connection diagram for the KVM Switch.

4. Operating Instructions

4.1. Switching Between Computers

The KVM Switch offers two methods for switching between connected computers:

• Front Panel Buttons: Press the 'PC1', 'PC2', or 'PC3' buttons on the front of the KVM Switch to directly select the desired computer.
• Wired Remote Control: Use the included wired remote to switch between computers. This is convenient for hiding the KVM unit under your desk.

Image 4: Switching methods: front panel buttons and wired remote.

4.2. Display Modes (Extended and Mirrored)

The KVM Switch supports both extended and mirrored display modes across your three monitors:

• Extended Mode: Outputs three different screens, allowing for a larger workspace.
• Mirror Mode: Outputs three identical screens.

To set the output mode on Windows, press the "Windows + P" shortcut key. A small window will appear, allowing you to choose between "Mirror Mode" or "Extend Mode".

Image 5: Explanation of Extended and Mirror display modes.

4.3. Compatibility

The MLEEDA KVM Switch is driver-free and compatible with various operating systems and devices:

• Operating Systems: Windows, Mac, Linux, Unix, Ubuntu, Chrome OS.
• Input Devices: PC, Laptop, PS4, Raspberry Pi, DVR, NVR.

Image 6: KVM Switch compatibility with various operating systems.

5. Maintenance

To ensure the longevity and optimal performance of your KVM Switch:

• Keep the device in a cool, dry place away from direct sunlight and excessive heat.
• Clean the exterior with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
• Ensure all cable connections are secure to prevent signal loss or intermittent issues.
• Avoid placing heavy objects on the KVM Switch.

6. Troubleshooting

6.1. No Display or Incorrect Resolution

• Check Cables: Ensure all HDMI and DisplayPort cables are securely connected to both the KVM Switch and your monitors/PCs. Verify that you are using high-quality cables that support the desired resolution.
• Power Supply: Confirm the 12V DC power adapter is connected and providing power to the KVM Switch. While the KVM may function without it for low-power USB devices, it is crucial for stable video output and high-power USB peripherals.
• PC Output Settings: Verify your PC's display settings are configured for extended or mirrored displays as desired. Use the "Windows + P" shortcut on Windows.
• Graphics Card Compatibility: The final resolution is subject to your graphics cards, monitors, cables, and adapters. Ensure your hardware supports the desired 8K or 4K resolutions.
• Driver Updates: For certain operating systems, especially macOS with DisplayLink docking stations, ensure you have the latest DisplayLink drivers installed. Older drivers or systems might only support a limited number of external monitors (e.g., two instead of three extended displays).

6.2. Keyboard/Mouse Not Responding

• USB Cable Connection: Ensure the USB 3.0 cables from each PC to the KVM Switch are properly connected.
• Power Adapter: If using high-power USB devices, ensure the 12V DC power adapter is connected to the KVM Switch.
• Peripheral Compatibility: While generally compatible, some specialized keyboards or mice might have unique driver requirements. Try a standard keyboard/mouse to isolate the issue.

6.3. Switching Delays

A brief delay during switching is normal as the KVM re-establishes connections. If delays are excessive, check cable quality and ensure the power adapter is connected.

7. Specifications

Image 7: KVM Switch supporting 8K Ultra HD resolution.

Image 8: KVM Switch featuring 4 USB 3.0 ports for high-speed data transfer.

8. Warranty and Support

MLEEDA provides comprehensive after-sales service for this KVM Switch:

• Warranty: Within 12 months of purchase, the switch will be replaced for free if any issues arise.
• Technical Support: If you encounter any questions or difficulties during use, please contact MLEEDA customer service. A professional technical team is available to assist you.