AVERA CEP90 Pyramid Wall-Mounted Kitchen Hood User Manual

1. Introduction

Thank you for choosing the AVERA CEP90 Pyramid Wall-Mounted Kitchen Hood. This appliance is designed to effectively remove smoke, odors, and grease from your cooking area, ensuring a fresh and clean kitchen environment. Please read this manual thoroughly before installation and operation to ensure proper use and maintenance.

Figure 1: AVERA CEP90 Pyramid Wall-Mounted Kitchen Hood

Key Features:

• Powerful extraction for effective smoke and odor removal.
• Three washable metallic mesh filters and one activated carbon filter for superior air purification.
• Elegant pyramid design in stainless steel, suitable for modern kitchens.
• Three-speed operation with low noise levels (48 dB to 62 dB).
• Integrated 2 x 2W LED lights for bright illumination of the cooking area.
• Dual ventilation modes: recirculation (interior) and ducted (exterior).

2. Safety Information

Please observe the following safety precautions to reduce the risk of fire, electric shock, or injury:

• Ensure the power supply matches the voltage specified on the rating label (127V).
• Installation must be performed by a qualified technician in accordance with local regulations.
• Do not operate the hood without filters in place.
• Regularly clean grease filters to prevent fire hazards.
• Do not flambé under the range hood.
• Keep children away from the appliance during operation.
• Disconnect power before any cleaning or maintenance.

3. Product Components

Familiarize yourself with the main parts of your AVERA CEP90 kitchen hood:

Figure 2: Control Panel and Key Components

• Control Panel: Includes buttons for LED light, fan speeds, and On/Off.
• LED Lights: Two 2W LED lights illuminate the cooking surface.
• Metallic Mesh Filters: Three removable and washable filters to capture grease.
• Activated Carbon Filter: Used for recirculation mode to purify air (one included).
• Decorative Chimney: Covers the ducting or recirculation system.
• Power Cord: 127V connection.

4. Installation

The AVERA CEP90 kitchen hood is designed for wall-mounted installation. A basic installation kit is included.

4.1. Unpacking and Inspection

1. Carefully remove the hood from its packaging.
2. Inspect the appliance for any damage during transit. Do not install if damaged.
3. Ensure all components listed in the manual are present.

Figure 3: Basic Installation Kit

4.2. Mounting the Hood

• The hood must be mounted on a sturdy wall.
• Maintain a correct distance of 65 to 70 cm between the bottom of the hood and the cooking surface (grill/stove).

Figure 4: Recommended Installation Distance

4.3. Ventilation Modes

The hood supports two ventilation modes:

• Duct Mode (Exterior Ventilation): Air is expelled outside through a duct. This requires connecting the hood to an external ventilation system.
• Recirculation Mode (Interior Ventilation): Air is filtered through the activated carbon filter and then returned to the kitchen. This mode is used when external ducting is not possible.

Figure 5: Ventilation Modes

5. Operation

The AVERA CEP90 features an intuitive control panel for easy operation.

5.1. Power On/Off

• Press the On/Off button (usually marked with a power symbol) to turn the hood on or off.

5.2. Fan Speed Control

The hood offers three fan speeds to adapt to your cooking needs:

• Low Speed (48 dB): Ideal for light cooking or simmering.
• Medium Speed (56 dB): Suitable for general cooking.
• High Speed (62 dB): For heavy cooking, frying, or when strong odors are present.

Press the corresponding speed buttons on the control panel to select your desired setting.

Figure 6: Fan Speed and Noise Levels

5.3. LED Lighting

• Press the LED light button (usually marked with a light bulb symbol) to turn the cooking area lights on or off.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your hood.

6.1. Cleaning the Exterior

• Wipe stainless steel surfaces with a soft cloth dampened with warm water and mild soap.
• Avoid abrasive cleaners or scouring pads, as they can scratch the surface.
• Dry thoroughly with a clean cloth.

6.2. Cleaning Metallic Mesh Filters

The three metallic mesh filters should be cleaned frequently, depending on usage.

1. Turn off the hood and disconnect it from the power supply.
2. Remove the filters by pulling the release latch and lowering them.
3. Wash the filters by hand in warm, soapy water or in a dishwasher.
4. Rinse thoroughly and allow them to dry completely before re-installing.

6.3. Replacing Activated Carbon Filter (for Recirculation Mode)

If you are using the hood in recirculation mode, the activated carbon filter needs to be replaced approximately every 6 months, or more frequently depending on usage.

1. Turn off the hood and disconnect it from the power supply.
2. Remove the metallic mesh filters to access the carbon filter.
3. Remove the old carbon filter and dispose of it properly.
4. Install a new AVERA activated carbon filter, ensuring it is securely in place.
5. Re-install the metallic mesh filters.

7. Troubleshooting

Before contacting customer service, please check the following common issues:

8. Specifications

Here are the technical specifications for the AVERA CEP90 Kitchen Hood:

Figure 7: Product Dimensions and Weight

9. Warranty and Support

The AVERA CEP90 Kitchen Hood comes with a 2-year warranty. For warranty claims, technical support, or service inquiries, please contact AVERA customer service through their official channels or the retailer where the product was purchased.

Please retain your proof of purchase for warranty validation.