TRUPOW 1HP Submersible Water Pump with 25ft. Hose Kit

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your TRUPOW 1HP Submersible Water Pump, Model TP-0818A. Please read these instructions carefully before use and retain them for future reference.

Image 1.1: TRUPOW 1HP Submersible Water Pump with included hose and adapters.

Key Features:

• High Efficiency: 1HP motor moves up to 3980 gallons per hour (GPH) with a maximum vertical lift of 28 feet.
• Durable Construction: Full thermoplastic housing and solid copper motor windings ensure longevity and reliable performance.
• Overheat Protection: Automatic disconnection feature protects the motor from overheating.
• Removable Bottom Screen: Easy-to-clean inlet strainer prevents coarse dirt from entering the pump, maintaining optimal operation.
• Low Suction Capability: Can remove water down to 8mm (approximately 0.3 inches).
• Portable Design: Compact and lightweight with a built-in handle and 16.4ft power cable for easy transport and installation.
• Versatile Connections: Includes 1" NPT discharge size, a 3/4" garden hose adapter, and a 25ft water hose.

2. Safety Information

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury.

• Electrical Safety: Ensure the power supply matches the pump's specifications (110-120V/60Hz). Do not operate the pump with a damaged cord or plug. Do not pull the pump by its power cord.
• Water Temperature: Do not pump liquids hotter than 95°F (35°C).
• Submersion: This pump is designed for submersible use only. Ensure it is fully submerged during operation to prevent dry running and motor damage.
• Debris: Avoid pumping highly corrosive, flammable, or explosive liquids. The pump is designed for clean water with particles up to 4mm in diameter.
• Children and Pets: Keep children and pets away from the operating pump and any water being drained.
• Maintenance: Always disconnect the pump from the power supply before performing any maintenance or cleaning.

Image 2.1: The pump features IPX8 water resistance and is suitable for fluids up to 95°F.

3. Package Contents

Verify that all items are present and undamaged upon opening the package:

• 1x TRUPOW Submersible Water Pump (Model TP-0818A)
• 1x 25ft Hose Kit
• 2x Hose Adapters (1" NPT and 3/4" Garden Hose)
• 1x Instruction Manual

Image 3.1: The pump comes with various hose adapters and a 25ft hose for versatile connections.

4. Setup Instructions

Follow these steps to prepare your pump for operation:

1. Choose Appropriate Adapter: Select the correct hose adapter (1" NPT or 3/4" garden hose) for your water pipe or hose. Securely attach it to the pump's discharge port.
2. Connect Hose: Attach the 25ft hose (or your own compatible hose) to the adapter. Ensure a tight connection to prevent leaks.
3. Position the Pump: Place the pump in the area to be drained. Ensure the pump is on a stable, level surface.
4. Submerge the Pump: Immerse the pump in the water at an angle to allow any trapped air to escape. The minimum water level for self-priming is 65mm (approximately 2.5 inches). Ensure the pump is fully submerged before plugging it in.

Image 4.1: Visual guide for connecting the adapter, immersing the pump, and initiating operation.

5. Operating Instructions

The TRUPOW Submersible Water Pump operates via manual plug-in/out control.

1. Initiate Pumping: Once the pump is correctly set up and fully submerged, plug the power cord into a grounded electrical outlet. The pump will begin operating immediately.
2. Monitor Water Level: This pump does not have an automatic float switch. It is crucial to monitor the water level to prevent dry running, which can damage the motor. The pump can remove water down to 8mm (approximately 0.3 inches).
3. Stop Pumping: When the desired water level is reached or the pump is no longer needed, unplug the power cord from the electrical outlet to stop operation.
4. Removing the Pump: When lifting the pump, always use the integrated handle. Do not pull the pump by its power cable.

Image 5.1: The pump's capability to reduce water levels to a minimum residual depth.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your pump.

• Disconnect Power: Always unplug the pump from the power source before any cleaning or maintenance.
• Clean Bottom Screen: The pump is equipped with a removable inlet strainer (bottom screen) that prevents coarse dirt from entering. Periodically remove and clean this screen to prevent clogs and maintain efficient water flow.
• Inspect for Damage: Regularly inspect the power cord, housing, and connections for any signs of wear or damage. Do not use the pump if any damage is found.
• Storage: When not in use, clean the pump thoroughly, drain any remaining water, and store it in a dry, frost-free location.

Image 6.1: The removable suction base allows for easy cleaning of the inlet strainer.

7. Troubleshooting

If you encounter issues with your pump, refer to the following common problems and solutions:

8. Specifications

Image 8.1: Visual representation of the pump's compact dimensions and key technical specifications.

9. Warranty and Support

TRUPOW stands behind the quality of its products. This pump is 100% manufacturer tested to ensure a long-lasting lifespan.

For any reason you are not satisfied or require assistance, please feel free to contact us. We are committed to replying and solving your problems within 24 hours.

Contact Support:

Please refer to your purchase platform or the contact information provided at the time of purchase for the most direct support channels.