1. Introduction
The HOROW T33 Smart Toilet is designed to enhance your bathroom experience with advanced hygiene and comfort features. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your smart toilet.
Key features include a multi-layer water filtration system for clean bidet washing, plasma air sterilization and deodorization, a powerful tankless flush, an ADA-compliant seat height, and a range of customizable comfort settings.
2. Setup and Installation
Proper installation is crucial for the functionality and safety of your HOROW T33 Smart Toilet. Please follow these steps carefully. Professional installation is recommended.
2.1 Unboxing and Preparation
Carefully remove the toilet from its packaging. Ensure all components are present and undamaged. The toilet is heavy and requires two people to carry it safely.
2.2 Flange and Mounting
Place the flange on the ground and align it with the centerline of the drain outlet. Mark the floor mounting holes. If an applicable flange is already in place, there is no need to install the new one. Install the mounting blocks with bolts, positioning the two mounting blocks on opposite sides of the flange on the ground, and securing them with washers and nuts.
2.3 Water Connection
Turn off the main water supply and then remove the existing supply stop valve. Turn on the water supply and flush for 1 minute to clear any debris that may damage the toilet structure. Connect the angle valve to the water supply pipe, using a gasket to prevent water leakage. Use Teflon tape on all threaded connections to ensure a watertight seal. Connect the flush water hose and the clean water hose to the installed angle valve and tighten them separately.
Image: Detailed diagram illustrating the water supply connections and angle valve for the HOROW T33 Smart Toilet.
2.4 Power Connection
Ensure the electrical requirements are met: 10 A at 120 V, 60 Hz. Plug the power plug into an AC 120 V socket. Press the knob on the toilet to start a flush and confirm the toilet is powered on.
2.5 Securing the Toilet
Install the wax ring onto the drain hole at the bottom of the ceramic toilet and press it firmly into place. Carefully lower the toilet onto the drain hole, aligning it with the mounting bolts. Secure the toilet to the floor using the provided hardware. Apply silicone sealant around the base of the toilet where the access covers meet the floor.
2.6 Remote Control Holder Installation
Peel off the backing paper from the double-sided tape on the back of the remote control holder. Attach the holder to the wall, pressing the tape firmly and evenly. Allow 15 minutes after installation before mounting the remote control. Ensure the remote control holder is installed away from the bidet's spray trajectory.
3. Operating Instructions
The HOROW T33 Smart Toilet offers a variety of functions for a personalized and hygienic experience. All functions can be controlled via the side knob or the remote control.
3.1 Remote Control Functions
The remote control provides comprehensive control over all toilet functions. Ensure the remote control is within range of the toilet for optimal operation.
Image: The remote control for the HOROW T33 Smart Toilet, displaying buttons for rear wash, front wash, stop, dryer, flush, strong/weak pressure, seat temperature, water temperature, deodorizer, night light, power save, nozzle clean, and nozzle position adjustment.
- Rear Wash: Press to start rear cleaning. Press again to activate movement wash, and a third time to return to rear wash. It will stop after approximately 4 minutes.
- Front Wash: Press to start feminine cleaning. Press again to activate movement wash, and a third time to return to front wash. It will stop after approximately 4 minutes.
- Stop: Press to stop any activated wash functions (front wash or rear wash) or the dryer. Press and hold for 3 seconds to turn off the toilet.
- Dryer: Press to dry off after using the wash function. It will stop after approximately 4 minutes. Temperature is adjustable in 4 levels.
- Flush: Press to activate a powerful flush.
- Strong/Weak: Adjusts water pressure for wash functions.
- Seat Temp: Adjusts heated seat temperature in 4 levels. Option to turn off.
- Water Temp: Adjusts water temperature for wash functions in 4 levels.
- Deodorizer: Activates the deodorization function.
- Night Light: Turns the night light on/off.
- Power Save: Activates power-saving mode.
- Nozzle Clean: Initiates automatic nozzle cleaning.
- Front/Back: Adjusts nozzle position for precise cleaning.
3.2 Side Knob Operations
The side knob provides quick access to essential functions.
Image: The all-in-one side knob on the HOROW T33 Smart Toilet, indicating controls for power/stop, rear wash/front wash, and air-drying.
- Power/Stop: Press and hold the knob for 3 seconds to enter standby mode. Rotate clockwise or counterclockwise to enter idle mode. Press to stop the current function.
- Rear Wash: Rotate the knob counterclockwise to start the smart rear wash cycle.
- Front Wash: Rotate the knob clockwise to start the smart front wash cycle.
- Air-drying: During the smart rear wash, rotate the knob counterclockwise to activate the warm dryer.
3.3 Automatic Flushing
The toilet is equipped with multiple automatic flushing options:
- Foot Sensor Flush: Kick the foot sensor area with your foot to flush the toilet immediately after use.
- Off-Seat Flush: When the toilet seat is occupied, the product will flush automatically once the user leaves the seat.
- Pre-wet Feature: When the toilet seat is occupied, the product will pre-wet the bowl to prevent waste from sticking.
Image: The HOROW T33 Smart Toilet offers three convenient flushing options: foot sensor flush, automatic off-seat flush, and remote control flush.
3.4 Night Light
The soft night light illuminates the toilet bowl, providing visibility in the dark without needing to turn on bright bathroom lights. Activate or deactivate using the remote control.
Image: The HOROW T33 Smart Toilet with its soft night light activated, providing gentle illumination of the toilet bowl in low-light conditions.
4. Maintenance
Regular maintenance ensures the longevity and hygienic performance of your HOROW T33 Smart Toilet.
4.1 Self-Cleaning Nozzle
The bidet nozzle features an automatic self-cleaning function. Activate this function via the remote control to ensure the nozzle remains hygienic.
Image: The detachable self-cleaning nozzle of the HOROW T33 Smart Toilet, designed for easy maintenance and enhanced hygiene.
4.2 Water Purification and Sterilization
The toilet is equipped with a multi-layer water filtration system to ensure clean water for bidet washing. Built-in UVC light helps sterilize cleaning water during every wash. Plasma sterilization releases ions to help clean the air and surfaces, automatically activating after use.
Image: A cutaway diagram of the HOROW T33 Smart Toilet highlighting the UVC water purification system, which sterilizes water during each wash.
Image: The HOROW T33 Smart Toilet utilizing plasma sterilization, releasing ions to clean the air and surfaces automatically after use.
4.3 Anti-Bacterial Seat and Deodorization
The toilet seat is made of antibacterial material for enhanced hygiene. The built-in deodorizer helps reduce bathroom odors, keeping the space fresh and comfortable.
Image: The anti-bacterial seat of the HOROW T33 Smart Toilet, designed with special materials to enhance hygiene and provide a cleaner experience.
5. Troubleshooting
If you encounter any issues with your HOROW T33 Smart Toilet, please refer to the following common solutions:
- No Power: Ensure the power plug is securely connected to a functional AC 120V outlet. Check if the circuit breaker has tripped.
- No Flush/Weak Flush: Verify the water supply valve is fully open. Check for any blockages in the nozzle or flush mechanism. Ensure the seat sensor is not obstructed if using automatic flush.
- Blackout Flush: The toilet is designed to operate even during power outages using a battery pack (not included, but can be purchased separately). If a power outage occurs, ensure the battery pack is correctly installed to enable flushing.
- Water Leakage: Check all water connections for tightness. Ensure Teflon tape was used on threaded connections.
- Bidet Not Working: Ensure the seat is occupied for bidet functions to activate. Check water temperature and pressure settings on the remote.
- Unpleasant Odors: Verify the deodorizer function is active. Ensure proper ventilation in the bathroom.
Image: A cutaway diagram of the HOROW T33 Smart Toilet, illustrating the internal components that enable the blackout flush feature during power outages.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | HOROW |
| Model Number | T33 |
| Color | White Skirted Toilet |
| Material | Ceramic, Polypropylene (PP) |
| Installation Type | Floor Mounted |
| Shape | Bidet Toilet (Elongated) |
| Item Weight | 99 pounds |
| Product Dimensions | 27.09 x 16.46 x 18.43 inches |
| Power Source | AC |
| Voltage | 120 Volts |
| Water Consumption | 1.28 Gallons per Flush (1.0 gpf) |
| Flush Type | Automatic, Powerful Pump-assisted Siphon Flush |
| Rough-In | 12 Inches |
| Included Components | Flange, Wax Ring, Mounting Accessory kit, Valve, Adapter, Remote |
| Special Features | Bidet, Clean Water Washing, Plasma Air, ADA Compliant, Heated Seat, Warm Dryer, Night Light, Deodorization, UVC Water Purification, Self-cleaning Nozzle, Foot Sensor Flush, Off-Seat Flush, Remote Control Flush, Blackout Flush, Adjustable Water/Seat Temperature, Adjustable Nozzle Position |
Image: Technical drawing with key dimensions of the HOROW T33 Smart Toilet, showing height, width, and depth measurements.
7. Warranty and Support
HOROW values each customer's shopping experience and believes in the quality of our products. Therefore, our toilets come with lifetime after-sales service and a 1-year limited warranty. Our customer service center will respond to messages within 12 hours.
For support, please refer to the contact information provided in your product packaging or visit the official HOROW website.
