Faria 13894
FariaGreat Product User Manual
Model: 13894
Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your FariaGreat Product, Model 13894. This device is a marine fish finder and depth finder designed to provide accurate underwater readings for various boating activities. Please read this manual thoroughly before using the product to ensure proper function and safety.
Product Overview
Image: The FariaGreat Product consists of a circular gauge-style display unit with a digital screen and control buttons, alongside a separate black thru-hull transducer unit.
Components:
- Main Display Unit: Circular gauge with digital screen, ON/OFF/MODE button, and Up/Down arrow buttons.
- Thru-Hull Transducer: Black, threaded unit for mounting through the hull of a vessel.
- Mounting Hardware (not pictured, but implied for installation).
- Power Cable (not pictured, but implied for operation).
Key Features:
- Digital depth display.
- Red backlight for visibility in low light conditions.
- Compact 2-3/16 inch outer diameter face.
- Maximum measuring depth of 199 feet.
- Battery powered operation.
Setup and Installation
Proper installation is crucial for the accurate performance of your FariaGreat depth finder. It is recommended that installation be performed by a qualified marine technician.
1. Transducer Mounting:
The thru-hull transducer requires drilling a hole through the boat's hull. Select a location that is:
- Free from turbulence and air bubbles.
- Away from propellers and other sources of interference.
- Accessible for maintenance.
Follow the transducer manufacturer's specific instructions for drilling and sealing the thru-hull fitting to prevent water ingress.
2. Display Unit Installation:
The display unit is designed for panel mounting. Cut a circular hole of the appropriate diameter (approximately 2-3/16 inches) in your dashboard or console. Secure the unit using the provided mounting bracket and hardware.
3. Wiring:
- Connect the transducer cable to the designated port on the back of the display unit.
- Connect the power cable to a 12V DC power source, ensuring proper polarity (red to positive, black to negative).
- Install an inline fuse (not included) on the positive power lead to protect the unit from power surges.
Ensure all connections are secure and waterproofed as necessary for a marine environment.
Operating Instructions
Powering On/Off:
Press and hold the ON / OFF MODE button for approximately 3 seconds to turn the unit on or off. The display will illuminate with a red backlight when powered on.
Display Modes:
Briefly press the ON / OFF MODE button to cycle through available display modes. These may include:
- Current Depth: Displays the real-time depth beneath the transducer.
- Shallow Alarm: Allows setting a shallow depth alarm.
- Deep Alarm: Allows setting a deep depth alarm.
- Keel Offset: Adjusts the depth reading to compensate for the transducer's position relative to the boat's keel.
Adjusting Settings:
When in a setting adjustment mode (e.g., Shallow Alarm, Deep Alarm, Keel Offset), use the ▲ (Up) and ▼ (Down) arrow buttons to increase or decrease values. Press the ON / OFF MODE button again to confirm the setting and exit the adjustment mode.
Depth Readings:
The unit will continuously display the depth once powered on and receiving a signal from the transducer. Readings are typically accurate up to 199 feet. Performance may vary based on water conditions, boat speed, and transducer placement.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your depth finder.
Cleaning:
- Display Unit: Wipe the display and casing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Transducer: Periodically inspect the transducer face for marine growth, dirt, or damage. Clean with a soft brush and mild soap if necessary. Ensure the transducer face is free of obstructions for accurate readings.
Connections:
Check all electrical connections periodically for corrosion or looseness. Apply marine-grade dielectric grease to connections to prevent corrosion.
Storage:
If storing the boat for an extended period, ensure the unit is powered off. For winterization, consider disconnecting the unit and storing it in a dry, temperature-controlled environment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power / Display Off | Loose power connection, blown fuse, low battery voltage. | Check power cable connections. Inspect and replace fuse if blown. Verify boat battery voltage. |
| Inaccurate Depth Reading | Transducer fouled, air bubbles under transducer, electrical interference, incorrect keel offset. | Clean transducer face. Reduce boat speed. Check for nearby electrical devices. Adjust keel offset setting. |
| No Depth Reading (Dashes or "---") | Transducer disconnected, transducer damaged, water too shallow/deep, severe turbulence. | Check transducer cable connection. Inspect transducer for physical damage. Ensure water depth is within operating range (1-199 ft). Reduce boat speed. |
| Display Flickers or Freezes | Unstable power supply, internal fault. | Check power connections and voltage stability. If problem persists, contact customer support. |
Specifications
| Brand | Faria |
| Model Name | 13894 |
| Power Source | Battery Powered (12V DC) |
| Screen Size | 26 Inches (Display Unit Face OD: 2-3/16 inches) (Note: 26 inches likely refers to a different product or is a data entry error; the physical gauge is 2-3/16 inches.) |
| Display Type | LED (with red backlight) |
| Item Weight | 2.1 Pounds |
| Maximum Measuring Depth | 199 Feet |
| Mounting Type | Thru-Hull Mount (Transducer) |
| Material | Plastic |
| UPC | 759266138940 |
| Manufacturer | Faria Beede Instruments |
Warranty Information
The FariaGreat Product, Model 13894, comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims procedures, please refer to the warranty card included with your product or contact Faria Beede Instruments directly.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Faria Beede Instruments customer support. Visit their official website for the most current contact information.
Website: www.faria.com (Example link, actual link may vary)