Introduction
This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your Tracer Raptor Pro DS Electric Bike. Please read this manual thoroughly before your first ride and retain it for future reference. Understanding the features and proper use of your e-bike will ensure a safe and enjoyable riding experience.
The Tracer Raptor Pro DS is an electric mountain bike designed for adults, featuring a powerful motor, long-range battery, full suspension, and hydraulic disc brakes for versatile terrain performance.
Safety Information
WARNING: Failure to follow these safety instructions could result in serious injury or death.
- Always wear a helmet that meets CPSC or equivalent safety standards.
- Perform a pre-ride inspection before each use, checking brakes, tires, battery, and all fasteners.
- Do not ride under the influence of alcohol or drugs.
- Obey all local traffic laws and regulations.
- Be aware of your surroundings and ride defensively.
- Do not exceed the maximum weight capacity of 300 lbs.
- Ensure the battery is securely locked in place before riding.
- Avoid riding in extreme weather conditions or on excessively slippery surfaces.
- Keep hands and feet away from moving parts.
- Familiarize yourself with the operation of the hydraulic disc brakes for effective stopping.
Image: The hydraulic disc brake system provides stable and efficient braking power, crucial for safety in various conditions.
Setup and Assembly
Your Tracer Raptor Pro DS Electric Bike arrives approximately 85% pre-assembled. The remaining assembly steps are straightforward and can be completed with the included tools. It is recommended to watch the provided step-by-step video for visual guidance.
Initial Assembly Steps:
- Unpacking: Carefully remove all components from the packaging. Retain packaging materials for potential future transport or returns.
- Handlebar Installation: Attach the handlebars to the stem, ensuring they are centered and tightened securely.
- Front Wheel Installation: Install the front wheel, ensuring the disc brake rotor is correctly aligned with the caliper.
- Pedal Attachment: Attach the pedals. Note that pedals are typically marked 'L' for left and 'R' for right, and thread in opposite directions.
- Seatpost and Saddle Adjustment: Insert the seatpost with the saddle into the frame and adjust to a comfortable riding height. Secure tightly.
- Battery Installation: Insert the fully charged battery into its compartment and lock it securely.
- Final Checks: Double-check all bolts, nuts, and quick releases for tightness. Ensure tires are inflated to the recommended pressure.
Image: Overview of the Tracer Raptor Pro DS components, useful for identifying parts during assembly and operation.
Operating Instructions
Battery and Charging:
The e-bike is equipped with a 48V 20Ah (960Wh) removable lithium battery. For optimal performance and longevity, fully charge the battery before the first use and after every ride. The detachable design allows for convenient charging at home or in the office.
- To charge, remove the battery or plug the charger directly into the bike's charging port.
- Use only the charger provided by Tracer.
- Do not overcharge the battery; disconnect once fully charged.
- Store the battery in a cool, dry place when not in use.
Image: The 48V 20Ah removable battery, providing extended range for commuting and exploration.
LCD Display and Riding Modes:
The multifunction LCD display provides real-time information such as speed, mileage, and battery level. Use the control panel to select your preferred riding mode:
- Full Electric Mode: Provides motor assistance without pedaling.
- PAS (Pedal Assist System) Mode: Offers customizable motor assistance while you pedal, extending your range.
- Bike Mode: Operates as a traditional bicycle with no motor assistance.
Image: The Tracer Raptor Pro DS is suitable for various terrains and rider heights, offering different riding styles.
Motor and Performance:
The 800W brushless motor, with a peak power of 1000W, allows for speeds up to 30 MPH. The bike features dual suspension (front and seatpost) and 26-inch fat tires for enhanced comfort and traction across diverse terrains.
Image: The powerful 800W motor (1000W peak) provides robust performance and speed.
Image: The full suspension system enhances ride comfort and safety on varied road conditions.
Image: The 26-inch fat tires provide superior traction and adaptability for various terrains, including sand, snow, and rocky paths.
Maintenance
Regular maintenance ensures the longevity and safe operation of your Tracer Raptor Pro DS Electric Bike.
- Tires: Check tire pressure before each ride. Recommended pressure is typically printed on the tire sidewall. Inspect for wear and punctures.
- Brakes: Regularly inspect brake pads for wear and ensure hydraulic disc brakes are responsive. Adjust or replace components as needed.
- Battery Care: Keep the battery charged. Avoid fully discharging it. Clean battery contacts periodically.
- Chain and Drivetrain: Keep the chain clean and lubricated. Inspect for rust or damage.
- Fasteners: Periodically check all bolts, nuts, and quick releases for tightness.
- Cleaning: Clean the bike with a damp cloth. Avoid high-pressure washing directly on electrical components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on. | Battery not charged, battery not properly seated, power cable loose. | Charge battery, ensure battery is fully inserted and locked, check all electrical connections. |
| Motor not assisting. | PAS level set to zero, full electric mode not engaged, brake levers engaged, motor error. | Increase PAS level, switch to full electric mode, ensure brake levers are fully released, check display for error codes. |
| Brakes feel weak or spongy. | Worn brake pads, air in hydraulic line, low fluid level. | Inspect and replace brake pads, bleed hydraulic system, check fluid level (professional service recommended). |
| Unusual noises during riding. | Loose components, chain issues, wheel bearing problems. | Inspect all fasteners, clean and lubricate chain, consult a professional if noise persists. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Raptor Pro DS |
| Bike Type | Electric Bike |
| Motor | 800W Brushless (1000W Peak) |
| Max Speed | Up to 30 MPH |
| Battery | 48V 20Ah (960Wh) Removable Lithium |
| Max Range | 50+ miles (PAS Mode), 30 miles (Pure Electric Mode) |
| Tires | 26" Fat Tires |
| Brakes | Hydraulic Disc Brake (Dual) |
| Suspension | Dual (Front and Seatpost) |
| Frame Material | Iron |
| Number of Speeds | 1 |
| Max Load Capacity | 300 lbs |
| Recommended Rider Height | 5.4 - 6.2 ft |
| E-bike Net Weight | 130 lbs |
| Certification | UL 2849 Certified |
Image: Key specifications of the Tracer Raptor Pro DS, including battery, motor, suspension, and tire details.
Warranty and Support
The Tracer Raptor Pro DS Electric Bike comes with a 12-month warranty. For specific terms and conditions, please refer to your purchase documentation or the official Tracer website. Note that some components may have a shorter warranty period, such as the 30-day warranty mentioned for certain parts.
Tracer offers 24/7 customer support to assist with any questions or issues you may encounter. Please contact customer service through the retailer where you purchased the bike or visit the official Tracer website for support contact information.
