EUGAD Bar Stools with Backrest (Set of 2)

1. Introduction

Thank you for choosing EUGAD Bar Stools. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

Image 1.1: Overview of the EUGAD Bar Stools.

2. Safety Information

To ensure safe use and prevent injury or damage, please observe the following safety guidelines:

• Maximum Load Capacity: Do not exceed the maximum load capacity of 150 kg (330 lbs) per stool.
• Stable Placement: Always place the bar stool on a stable, flat, and level surface to prevent tipping.
• Regular Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Avoid Standing: Do not stand on the bar stool. Use it only for sitting.
• Children: Supervise children when they are near or using the bar stools.
• Moving: Lift the stool when moving it; do not drag it, as this may damage the floor or the stool's feet.

3. Package Contents

Before beginning assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 2 x Bar Stool Seats (Vintage Faux Leather, Brown)
• 2 x Metal Leg Frames (Black Matte)
• 1 x Assembly Hardware Kit (screws, washers, Allen key)
• 1 x Instruction Manual

4. Assembly Instructions (Setup)

Assembly is designed to be straightforward. Please follow the detailed, illustrated instructions provided in the included assembly manual. Ensure you have adequate space and the necessary tools (usually an Allen key, which is provided).

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
2. Identify Parts: Refer to the parts list in the separate assembly manual to identify each component.
3. Attach Legs to Seat: Securely attach the metal leg frame to the underside of the stool seat using the provided screws and Allen key. Do not overtighten initially.
4. Attach Footrest: Connect the footrest bars to the leg frame as indicated in the assembly manual.
5. Final Tightening: Once all components are loosely assembled, place the stool upright on a flat surface. Then, gradually tighten all screws evenly until secure.
6. Adjust Foot Pads: Ensure the adjustable foot pads are properly installed and adjusted to stabilize the stool and protect your floor.

Image 4.1: Stool dimensions and key features, aiding in assembly and understanding.

Note: Some users have reported missing assembly sheets. If your package lacks a detailed assembly guide, please contact EUGAD customer service for assistance.

5. Usage (Operating)

These bar stools are designed for versatile use in various settings:

• Ergonomic Comfort: The curved backrest and ergonomic seat are designed to support the natural curves of your back and hips, promoting a comfortable seating posture.
• Footrest: Utilize the integrated footrest to relax your legs and enhance comfort during prolonged sitting.
• Versatile Placement: Ideal for kitchen islands, home bars, bistro areas, dining rooms, or any counter-height surface.

Image 5.1: Bar stools in a kitchen island setting.

Image 5.2: Ergonomic design and adjustable foot pads for enhanced comfort and stability.

6. Care and Maintenance

Proper care will extend the life and appearance of your bar stools:

• Faux Leather Cleaning: The vintage faux leather is waterproof and easy to clean. Wipe spills immediately with a soft, damp cloth. For general cleaning, use a mild soap solution and wipe dry. Avoid harsh chemicals or abrasive cleaners.
• Frame Cleaning: Clean the metal legs with a soft, dry cloth. Avoid using abrasive materials that could scratch the finish.
• Sunlight Exposure: Avoid prolonged direct exposure to sunlight to prevent fading or damage to the faux leather.
• Heat Sources: Keep the stools away from direct heat sources like radiators or fireplaces.

Image 6.1: High-quality faux leather features: high resilience and water-repellent.

7. Troubleshooting

If you encounter any issues with your bar stools, please refer to the following common solutions:

• Stool feels wobbly: Ensure all screws are tightened securely and evenly. Check that the stool is placed on a flat surface. Adjust the foot pads if necessary to compensate for uneven floors.
• Noisy feet/Scratches on floor: Verify that the protective foot pads are correctly installed and intact. If they are worn or missing, replacements may be needed. Consider adding felt pads for extra floor protection and noise reduction.
• Difficulty with assembly: Refer to the detailed assembly manual. If steps are unclear or parts are missing, contact EUGAD customer support for assistance.

8. Specifications

9. Warranty and Support

For information regarding warranty coverage or if you require further assistance, please contact EUGAD customer support through the retailer where the product was purchased or visit the official EUGAD website. Please have your model number (1097BY-2) and purchase details ready when contacting support.