VINGLI 39" Console Table with Charging Station User Manual

1. Introduction

Thank you for purchasing the VINGLI 39" Console Table with Charging Station. This manual provides essential information for the safe assembly, operation, and maintenance of your new console table. Please read these instructions thoroughly before assembly and retain them for future reference.

Image 1.1: The VINGLI 39" Console Table with Charging Station, showcasing its narrow design and integrated power outlet.

2. Safety Information

To ensure safe use of your VINGLI console table, please observe the following safety guidelines:

• Do not overload the table beyond its maximum weight capacity of 65 pounds.
• Always use the provided anti-tip devices to secure the table to a wall, preventing accidental tipping.
• Follow the assembly instructions carefully to ensure proper and safe construction.
• Keep the charging station away from liquids to prevent electrical hazards.
• Ensure the power cord is not pinched or placed under heavy objects.

Image 2.1: Illustration of the table's thoughtful details, including the anti-tip device for enhanced safety.

3. Package Contents

Before beginning assembly, verify that all components are present. If any parts are missing or damaged, please contact customer support.

• Tabletop (Engineered Wood, Rustic Brown)
• Metal Frame Components (Legs, Support Bars)
• Charging Station (2 AC Outlets, 2 USB Ports, 4.9 ft Extension Cord)
• Adjustable Feet
• Anti-Tip Devices
• Assembly Hardware (Screws, Allen Wrench, etc.)
• Assembly Guide

4. Assembly Instructions

Assembly is designed to be straightforward. Please follow the steps below. It is recommended to assemble the table on a soft, clean surface to prevent scratches.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify against the package contents list.
2. Attach Legs to Frame: Secure the metal legs to the main frame components using the provided screws and Allen wrench. Ensure all connections are firm but do not overtighten initially.
3. Install Tabletop: Place the tabletop onto the assembled frame. Align the pre-drilled holes and secure the tabletop to the frame using the appropriate screws.
4. Insert Charging Station: Carefully place the charging station into its designated slot on the tabletop. Secure it with the provided fasteners.
5. Attach Adjustable Feet: Screw the adjustable feet into the bottom of the table legs. These can be adjusted later to level the table on uneven surfaces.
6. Install Anti-Tip Device: Attach one part of the anti-tip device to the back of the table and the other part to a wall stud using appropriate hardware. This is a crucial safety step.
7. Final Tightening: Once all components are in place, carefully tighten all screws to ensure stability. Do not overtighten.

Image 4.1: Visual representation of the table's dimensions (39.37" W x 5.91" D x 31.10" H) and 65 lbs weight capacity, useful for planning placement.

5. Operating Instructions (Charging Station)

The integrated charging station provides convenient power access for your devices.

1. Connect to Power: Plug the 4.9 ft extension cord from the charging station into a standard 120V AC wall outlet.
2. Using AC Outlets: Insert your device's power adapter into one of the two AC outlets (120V/12A max).
3. Using USB Ports: Connect your USB charging cable to one of the two USB ports (5V/2A max) and then to your device.
4. Positioning: The charging station can be positioned on either end of the table during assembly to suit your preference.

Important: Do not exceed the maximum electrical ratings of the charging station. Avoid using damaged cords or adapters.

Image 5.1: Detailed view of the charging station, highlighting the AC outlets and USB ports for device charging.

6. Maintenance

To maintain the appearance and longevity of your console table:

• Cleaning: Wipe the table surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Spills: Promptly wipe up any spills to prevent staining or damage to the wood grain tabletop.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Environment: Avoid placing the table in direct sunlight or near heat sources to prevent warping or fading.

7. Troubleshooting

If you encounter any issues with your VINGLI console table, refer to the following common solutions:

• Table is Wobbly:
  • Ensure all assembly screws are securely tightened.
  • Adjust the leveling feet at the bottom of the legs to compensate for uneven floors.
• Charging Station Not Working:
  • Verify that the extension cord is fully plugged into a functional wall outlet.
  • Check if the wall outlet itself is receiving power (test with another device).
  • Ensure your device's charging cable and adapter are not damaged and are correctly inserted.
  • Do not exceed the maximum load capacity of the charging station.
• Missing or Damaged Parts:
  • Contact VINGLI customer support immediately for assistance.

8. Specifications

9. Warranty and Support

VINGLI products are manufactured with quality and care. For warranty information or technical support, please contact VINGLI customer service through the retailer where the product was purchased or visit the official VINGLI website.

Please have your model number (console table3) and purchase date available when contacting support.