1. Introduction
This manual provides detailed instructions for the safe and effective use of the CEM ILDM-150 Laser Distance Measure. The ILDM-150 is a precision instrument designed for accurate distance, area, and volume measurements, featuring Bluetooth connectivity for data transfer and management via the Meterbox Pro application. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.
Figure 1.1: CEM ILDM-150 Laser Distance Measure and included accessories.
2. Product Features
The CEM ILDM-150 Laser Distance Measure offers a range of features designed for efficiency and accuracy:
- High Accuracy: Utilizes a Class II Laser with 1mW output, providing accuracy up to ±1/16 inch (1.5mm) over a measuring range of up to 229 feet (70 meters).
- Multiple Measurement Modes: Supports single distance, continuous measurement, area, volume, and Pythagorean (three-point) calculations.
- Unit Switching: Easily switch between meters (M), inches (In), and feet (Ft).
- Bluetooth 4.0 Connectivity: Seamlessly transfer measured data to a smartphone or tablet using the Meterbox Pro application for analysis and sharing.
- Data Storage: Stores up to 99 groups of measurement data, with manual deletion capability.
- LCD Backlight: Large backlit screen for improved visibility in low-light conditions.
- Mute Setting: Option to turn the measurement beep on or off for use in quiet environments.
- Durable Design: IP54 rated for water and dust resistance, featuring a hard rubber body for enhanced grip and protection.
- Power Saving: Automatic shut-down after 150 seconds of inactivity to conserve battery life.
- Low Battery Indication: Alerts the user when batteries need replacement.
Figure 2.1: Overview of CEM ILDM-150 key features.
3. Safety Information
The CEM ILDM-150 is a Class II laser product. Adhere to the following safety guidelines:
- Do not stare directly into the laser beam.
- Do not aim the laser beam at people or animals.
- Avoid using optical instruments (e.g., binoculars, telescopes) to view the laser beam.
- Keep the device out of reach of children.
- Do not attempt to modify or disassemble the device.
- Use only specified batteries.
4. Getting Started (Setup)
4.1 Package Contents
Upon opening the package, verify that all items are present:
- CEM ILDM-150 Laser Distance Measure
- 1.5V AAA Batteries (Note: While typically included, please check the packaging upon receipt as specifications may vary.)
- Portable Bag
- User Manual
- Hand Strap
- Package Box
4.2 Battery Installation
The ILDM-150 requires 1.5V AAA batteries for operation.
- Locate the battery compartment cover on the rear of the device.
- Slide the cover open in the direction indicated by the arrow.
- Insert the AAA batteries, ensuring correct polarity (+/-) as marked inside the compartment.
- Close the battery compartment cover securely.
4.3 Powering On/Off
- To Power On: Press the MEAS button. The display will illuminate.
- To Power Off: Press and hold the CLR/OFF button for approximately 2 seconds. The device will also automatically shut down after 150 seconds of inactivity.
5. Operating Instructions
5.1 Basic Measurement
To perform a single distance measurement:
- Point the laser at the target surface.
- Press the MEAS button once. The laser will activate.
- Press the MEAS button again to take the measurement. The result will be displayed on the screen.
5.2 Unit Switching
To change the measurement unit (M/In/Ft):
- Press the Unit button repeatedly until the desired unit is displayed.
5.3 Backlight and Mute Settings
- The backlight automatically activates when the device is in use.
- To toggle the measurement beep (mute/unmute), refer to the specific button or menu option in your device's interface, typically indicated by a speaker icon.
5.4 Advanced Measurement Modes
The ILDM-150 supports various measurement functions:
- Area Measurement: Press the Area/Volume button once. Follow the on-screen prompts to measure length and width. The device will calculate and display the area.
- Volume Measurement: Press the Area/Volume button twice. Follow the on-screen prompts to measure length, width, and height. The device will calculate and display the volume.
- Pythagorean Measurement (Indirect Measurement): Use this mode to calculate distances indirectly (e.g., height of a building). Press the Pythagorean button. Follow the on-screen prompts to take the required measurements (e.g., hypotenuse and one leg). The device will calculate the unknown side.
- Continuous Measurement (Tracking): Press the MEAS button and hold it down. The device will continuously measure and display the distance as you move it, showing real-time minimum and maximum values. Release the button to stop.
- Addition and Subtraction: After taking a measurement, use the '+' or '-' buttons to add or subtract subsequent measurements from the current total.
Figure 5.1: Multiple measurement modes supported by the ILDM-150.
5.5 Tailstock Function
The multi-functional tailstock allows for measurements from corners or edges, ensuring accuracy when the device cannot be placed flush against a surface.
Figure 5.2: Multi-functional use of the tailstock.
6. Bluetooth Connectivity & App
The ILDM-150 features Bluetooth 4.0 for seamless data transfer to your smartphone or tablet via the Meterbox Pro application.
6.1 Installing Meterbox Pro
- Search for "Meterbox Pro" in your device's app store (iOS App Store or Google Play Store).
- Download and install the application.
6.2 Pairing the Device
- Ensure Bluetooth is enabled on your smartphone/tablet.
- Power on the ILDM-150.
- Open the Meterbox Pro application. The app should automatically detect and connect to the ILDM-150.
- A Bluetooth icon on the ILDM-150's display will indicate a successful connection.
Figure 6.1: Bluetooth connectivity with Meterbox Pro app.
6.3 Data Transfer and Management
Once connected, measurements taken with the ILDM-150 can be transferred to the Meterbox Pro app. The app allows you to:
- View and organize measurement data.
- Create reports or charts.
- Share data via email, social media, or other applications.
Figure 6.2: Convenient data analysis and sharing via Meterbox Pro.
6.4 Data Storage on Device
The device can store up to 99 groups of historical data values.
- Recalling Data: Use the memory buttons (e.g., up/down arrows) to scroll through stored measurements.
- Deleting Data: Press the CLR button to manually delete the currently displayed data.
Figure 6.3: On-device data storage and display.
7. Maintenance and Care
Proper maintenance ensures the longevity and accuracy of your ILDM-150.
- Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Pay special attention to the laser lens, cleaning it gently with a lens cloth if necessary.
- Storage: Store the device in its portable bag in a cool, dry place when not in use. Avoid extreme temperatures and direct sunlight.
- Battery Care: Remove batteries if the device will not be used for an extended period to prevent leakage.
- Impact Protection: While durable, avoid dropping the device or subjecting it to strong impacts.
Figure 7.1: The ILDM-150 features IP54 water and dust protection.
8. Troubleshooting
If you encounter issues with your CEM ILDM-150, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low or dead batteries; Incorrect battery installation. | Replace batteries; Ensure correct polarity. |
| Inaccurate measurements. | Laser lens dirty; Unstable measurement surface; Device not held steady; Measurement taken over reflective or transparent surfaces. | Clean laser lens; Ensure stable placement; Use a target plate for difficult surfaces. |
| Bluetooth connection fails. | Bluetooth off on smartphone; Device out of range; App not running. | Enable Bluetooth; Ensure device is within 10m range; Restart Meterbox Pro app. |
| Display is dim or unreadable. | Low battery; Extreme temperature. | Replace batteries; Operate within specified temperature range. |
| Device shuts off unexpectedly. | Auto-off feature activated; Low battery. | This is normal after 150 seconds of inactivity; Replace batteries if low battery indicator is on. |
9. Technical Specifications
Detailed specifications for the CEM ILDM-150 Laser Distance Measure:
| Specification | Value |
|---|---|
| Brand | CEM |
| Model Name | ILDM-150 |
| Part Number | CEM ILDM-150 |
| Color | black 1 |
| Measuring Range | 229 feet or 70 meters |
| Accuracy | ±1/16 inch (1.5mm) |
| Laser Class | Class II, <1mW |
| International Protection Rating | IP54 (Waterproof, Dust-proof) |
| Material | Double Injection Molding Machine, Plastic |
| Item Weight | 203 Grams |
| Battery Type | Alkaline (AAA) |
| Auto Shut-off | 150 seconds (approx.) |
| Data Memory | 99 groups |
| Bluetooth Version | 4.0 |
| Item Dimensions (L x W x H) | 5.31 x 2.09 x 1.18 inches |
| UPC | 887327150034 |
| Manufacturer | Shenzhen Everbest Machinery Industry Co.,Ltd. |
| Date First Available | July 9, 2018 |
Figure 9.1: Dimensions of the ILDM-150.
10. Warranty and Support
10.1 Warranty Information
The CEM ILDM-150 Laser Distance Measure comes with a 12-month warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
10.2 Customer Support
For technical assistance, warranty claims, or further inquiries, please contact CEM customer support through their official website or the contact information provided with your purchase documentation. Please have your model number (ILDM-150) and purchase date ready when contacting support.