Introduction
Thank you for choosing the PUTORSEN Monitor and Laptop Mount Combo. This product is designed to enhance your workspace by providing an ergonomic and flexible solution for mounting your monitor and laptop. Please read this manual carefully before installation and use to ensure proper setup and safe operation. Keep this manual for future reference.
Safety Information
- Ensure your desk surface is strong enough to support the combined weight of the mount, monitor, and laptop.
- Do not exceed the maximum weight capacities for the monitor (20 kg) and laptop (9 kg).
- Always follow the installation instructions precisely. Improper installation may result in damage or injury.
- Keep children and pets away during installation.
- Periodically check all screws and connections to ensure they remain secure.
- Adjustments should be made slowly and carefully to prevent sudden movements.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.
- Main Pole (81.8 cm / 32.2 inches)
- Monitor Arm
- Laptop Tray Arm
- C-Clamp Assembly
- Grommet Mount Assembly
- VESA Plate(s)
- Hardware Kit (screws, washers, Allen keys)
- Cable Management Clips
Specifications
| Feature | Specification |
|---|---|
| Brand | PUTORSEN |
| Model | Monitor & Laptop Mount Combo (B0FF4YDP2D) |
| Monitor Screen Size Compatibility | 17 - 49 inches |
| Monitor Weight Capacity | Up to 20 kg (44 lbs) |
| Laptop Screen Size Compatibility | Up to 17 inches |
| Laptop Weight Capacity | Up to 9 kg (19.8 lbs) |
| VESA Compatibility | 75x75mm, 100x100mm |
| Pole Height | 81.8 cm (32.2 inches) |
| Mounting Options | C-Clamp, Grommet Mount |
| C-Clamp Desk Thickness | 10 - 80 mm (0.39 - 3.15 inches) |
| Grommet Mount Desk Thickness | 10 - 40 mm (0.39 - 1.57 inches) |
| Monitor Tilt Range | +50° / -20° |
| Monitor Swivel Range | +90° / -90° |
| Monitor Rotation | 180° / 360° |
| Laptop Tray Tilt Range | +45° / -45° |
| Laptop Tray Swivel Range | +45° / -45° |
| Laptop Tray Rotation | 180° / 360° |
Setup and Installation
Follow these steps carefully to install your PUTORSEN Monitor and Laptop Mount Combo.
Step 1: Choose Your Mounting Option
The mount offers two installation methods: C-Clamp or Grommet Mount. Select the option that best suits your desk.
C-Clamp Installation
This method is suitable for desks with a thickness between 10 mm and 80 mm (0.39 - 3.15 inches).
- Attach the C-clamp base to the main pole.
- Position the C-clamp on the edge of your desk.
- Tighten the clamp screw until the mount is securely fastened to the desk. Ensure it is stable and does not wobble.
Grommet Mount Installation
This method is suitable for desks with a thickness between 10 mm and 40 mm (0.39 - 1.57 inches) and requires an existing grommet hole.
- Assemble the grommet base and insert it through the desk's grommet hole.
- Secure the base from underneath the desk using the provided plate and nut.
- Attach the main pole to the grommet base and tighten.
Image: Detailed view of the C-clamp and grommet mounting options, including desk thickness compatibility and the detachable VESA plate design. The image also shows the overall dimensions of the mount and the detachable laptop tray.
Step 2: Attach Monitor and Laptop Arms
- Slide the monitor arm and laptop tray arm onto the main pole at your desired heights. Use the included Allen key to tighten them securely.
- The extra high pole (81.8 cm) provides ample height adjustment for optimal viewing.
Image: The PUTORSEN Monitor and Laptop Mount Combo in use, showcasing a large monitor (17-49 inches, up to 20kg) mounted above a laptop (up to 17 inches, up to 9kg) on a desk, illustrating the space-saving design.
Step 3: Mount Your Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure your monitor is VESA 75x75mm or 100x100mm compatible.
- Slide the monitor with the attached VESA plate onto the monitor arm. The detachable VESA plate design simplifies this process.
- Secure the monitor to the arm using the locking mechanism.
Step 4: Place Your Laptop on the Tray
- Place your laptop onto the laptop tray. The tray width is adjustable from 297 mm to 334 mm (11.7 - 16.5 inches) to accommodate laptops up to 17 inches.
- Use the anti-slip pads and side clips to secure your laptop on the tray. The ventilated base helps with cooling.
Image: A close-up view of the laptop tray, highlighting its adjustable width (29.7-42cm / 11.7-16.5 inches), anti-slip pads, and side clips for securing laptops up to 17 inches. The ventilated design is also visible.
Step 5: Cable Management
Utilize the integrated cable management clips along the arms and pole to route your cables neatly. This helps maintain a clean and organized workspace.
Image: Rear view of the PUTORSEN Monitor and Laptop Mount Combo, demonstrating how cables can be routed through the integrated cable management system for a tidy setup.
Operating Instructions (Adjustments)
The PUTORSEN mount offers extensive flexibility for optimal ergonomic positioning.
- Height Adjustment: Loosen the clamp on the main pole to slide the monitor and laptop arms up or down. Retighten once the desired height is achieved.
- Monitor Adjustments:
- Tilt: The upper monitor can tilt +50° to -20°.
- Swivel: The upper monitor can swivel +90° to -90°.
- Rotation: The upper monitor can rotate 180° or 360° for portrait or landscape orientation.
- Laptop Tray Adjustments:
- Tilt: The laptop tray can tilt +45° to -45°.
- Swivel: The laptop tray can swivel +45° to -45°.
- Rotation: The laptop tray can rotate 180° or 360°.
- The laptop arm can be extended up to 462 mm (18.2 inches).
Image: Visual representation of the extensive angle adjustments available for both the monitor and laptop tray, including tilt, swivel, and rotation ranges for ergonomic positioning.
Image: This image demonstrates the versatility of the mount, showing two possible configurations: a dual monitor setup (if the laptop tray is removed and another monitor is installed) and the standard monitor-laptop setup.
Maintenance
- Cleaning: Wipe the mount with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Periodic Check: Every few months, check all screws and connections to ensure they are tight and secure. Retighten if necessary.
- Lubrication: No lubrication is typically required for the moving parts. If any joints become stiff, contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount is wobbly or unstable. | Loose clamp/grommet, desk too thin/weak, weight exceeded. | Ensure C-clamp or grommet mount is fully tightened. Verify desk thickness is within specified range. Check monitor/laptop weight against maximum capacity. |
| Monitor/Laptop arm sags or won't hold position. | Joints not tightened enough, weight exceeded. | Use the provided Allen key to tighten the tension screws on the arm joints. Ensure weight limits are not exceeded. |
| Difficulty adjusting arm movement. | Tension screws too tight. | Slightly loosen the tension screws on the arm joints until movement is smooth but still holds position. |
| VESA plate does not fit monitor. | Incorrect VESA pattern. | Verify your monitor's VESA pattern is 75x75mm or 100x100mm. This mount is not compatible with other VESA patterns. |
Warranty and Support
PUTORSEN products are manufactured with quality and care. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official PUTORSEN website. Please have your product model (B0FF4YDP2D) and purchase date ready when contacting support.
For further assistance, you may also contact your retailer.
