Introduction
Thank you for choosing the Haute Decor 9 Foot Queensbury Fir Christmas Tree. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your pre-lit artificial Christmas tree. Please read these instructions carefully before setup and retain them for future reference.
This tree features 2700 cluster 8-function LED lights, Easy-Shape branches with memory wire for convenient shaping, and Instant Light technology for simplified assembly.
Image: The Haute Decor 9 Foot Queensbury Fir Christmas Tree illuminated with warm white LED lights, showcasing its full, natural appearance.
Safety Information
- For indoor use only. Do not use this product outdoors.
- Always unplug the tree from the power outlet before assembling, disassembling, or performing any maintenance.
- Do not overload electrical outlets. Ensure the power source meets the tree's electrical requirements.
- Keep children and pets away from the tree during assembly and ensure all parts are securely connected.
- Do not place the tree near heat sources, open flames, or flammable materials.
- Inspect the power cord and lights for any damage before each use. Do not use if damaged.
- Do not attempt to modify or repair the lighting system. Contact customer support if issues arise.
Package Contents
Verify that all components are present before beginning assembly:
- Tree Sections (typically 3-4 sections, labeled A, B, C, etc., from bottom to top)
- Metal Tree Stand
- Foot Pedal for Light Control
- Instruction Manual (this document)
Setup Instructions
- Assemble the Tree Stand: Open the metal tree stand and ensure it is stable and locked into position. Place it on a flat, level surface.
- Insert Bottom Section: Carefully insert the bottom tree section (usually labeled 'A') into the assembled tree stand. Tighten the thumb screws on the stand to secure the pole.
- Connect Middle Sections: Insert the next tree section (labeled 'B') into the top of section 'A'. Due to Instant Light technology, the lights should illuminate automatically as sections connect. Continue with subsequent sections (e.g., 'C', 'D') until all sections are assembled.
Image: The Haute Decor Queensbury Fir Christmas Tree assembled but before branches are fully shaped, showing the dense foliage.
- Connect Power: Locate the power cord extending from the base of the tree. Connect the foot pedal to the power cord, then plug the foot pedal into a standard electrical outlet.
- Shape the Branches: Begin shaping the branches from the bottom section upwards. The Easy-Shape branches with memory wire allow for minimal effort. Gently spread out each branch and individual tips to fill any gaps and achieve a full, natural appearance. Ensure all tips are fanned out evenly.
Operating the LED Lights
Your Haute Decor Queensbury Fir Christmas Tree features 2700 cluster LED lights with 8 distinct functions, controlled by a convenient foot pedal.
Image: A graphic displaying the 8 light modes available, showing the tree with warm white lights on the left and multicolor lights on the right.
Light Functions:
- Steady Warm White: Classic warm white illumination.
- Steady Multicolor: Vibrant multicolor illumination.
- Twinkle Warm White: Warm white lights with a twinkling effect.
- Twinkle Multicolor: Multicolor lights with a twinkling effect.
- Slow Fade Warm White: Warm white lights slowly fade in and out.
- Slow Fade Multicolor: Multicolor lights slowly fade in and out.
- Alternating Warm White & Multicolor: Lights switch between warm white and multicolor.
- Light Display: Cycles through all available functions.
- OFF: Turns the lights off.
Using the Foot Pedal:
To cycle through the light functions, simply tap the foot pedal. Each tap will advance to the next function in the sequence. To turn the lights off, continue tapping until the 'OFF' setting is reached.
Maintenance and Storage
Cleaning:
To clean the tree, gently wipe the branches with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the finish or lights.
Storage:
- Unplug the tree from the power outlet.
- Carefully remove all ornaments and decorations.
- Disassemble the tree sections in reverse order of assembly (top section first).
- Gently compress the branches of each section. The memory wire will help retain their shape for easier reassembly next season.
- Store the tree sections and stand in their original packaging or a suitable storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. |
|
|
| Some lights are out. |
|
|
| Tree is wobbly. |
|
|
Specifications
- Model: DCCT0905
- Height: 9 feet (108 inches / 274.3 cm)
- Diameter: 50 inches (at widest point)
- Number of Tips: 3,327 (52% PE, 48% PVC)
- Light Type: 2700 Cluster LED Lights
- Light Functions: 8 (Steady Warm White, Steady Multicolor, Twinkle Warm White, Twinkle Multicolor, Slow Fade Warm White, Slow Fade Multicolor, Alternating Warm White & Multicolor, Light Display, OFF)
- Control: Foot Pedal
- Material: Polyethylene, Polyvinyl Chloride, Metal Stand
- Item Weight: 57 pounds
- Lowest Branches from Floor: 10 inches
- Pole Diameter: 1.25 inches
Image: A diagram illustrating the dimensions of the Haute Decor Queensbury Fir Christmas Tree, including height (108 inches), diameter (50 inches), and height of lowest branches (10 inches).
Customer Support
For any questions, missing parts, or assistance with your Haute Decor Christmas tree, please contact our customer support team. Refer to your purchase documentation for specific contact details or visit the Haute Decor brand store on Amazon:
Visit the Haute Decor Store on Amazon
Please have your model number (DCCT0905) and purchase information ready when contacting support.