Lamicall Car Tire Portable Inflator Air Compressor and Car Windshield Sun Shade User Manual

1. Introduction

Thank you for choosing the Lamicall Car Tire Portable Inflator Air Compressor and Car Windshield Sun Shade. This product combines two essential automotive accessories designed to enhance your driving experience: a powerful, portable air compressor for tire maintenance and a high-performance sun shade for interior protection. Please read this manual thoroughly before use to ensure proper operation and safety.

Image: The Lamicall Portable Inflator Air Compressor and Car Windshield Sun Shade, showcasing both components of the product.

2. Safety Information

General Safety Precautions:

• Keep this manual for future reference.
• Do not allow children to operate the device.
• Store the product in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not disassemble or modify the product.

For the Air Compressor:

• Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your tire type.
• Do not over-inflate tires. Always refer to your vehicle's recommended tire pressure.
• The inflator may become warm during prolonged use. Allow it to cool down before storing.
• Avoid operating the inflator near flammable liquids or gases.

For the Sun Shade:

• Ensure the sun shade is securely placed to avoid obstructing your view or interfering with vehicle controls.
• Remove the sun shade before driving.

3. Package Contents

Please check the package for the following items:

• Lamicall Portable Inflator Air Compressor
• Lamicall Car Windshield Sun Shade
• Brass Presta Valve Adapter
• Ball Inflation Needle
• Swimming Circle Adapter
• USB Charging Cable (for inflator)
• Storage Bag (for sun shade)
• User Manual (this document)

4. Car Tire Portable Inflator Air Compressor

4.1 Product Features

• Fast Inflation: Up to 150 PSI maximum pressure and 35L/Min airflow rate.
• Long Battery Life: Rechargeable battery, capable of inflating multiple tires on a single charge.
• Automatic Stop: Automatically stops inflation when the preset pressure is reached.
• Multiple Modes: Five preset inflation modes (Car, Motorcycle, Bike, Ball, Custom) and four pressure units (PSI, KPA, BAR, KG/CM²).
• LED Display & Light: High-definition LED display and emergency light function with Flashlight, SOS, and Strobe modes.
• Power Bank Function: Can be used as an emergency power source for charging devices.

4.2 Setup and Charging

1. Initial Charge: Before first use, fully charge the inflator using the provided USB charging cable. Connect the cable to the inflator's charging port and a suitable USB power adapter (not included). The LED display will indicate charging status.
2. Attaching Nozzles: Select the appropriate nozzle for your item (e.g., Schrader valve for car/motorcycle tires, Presta valve adapter for bikes, needle for balls, or swimming circle adapter). Screw the nozzle securely onto the inflator's air hose.

Image: Internal view of the Lamicall Portable Inflator Air Compressor, highlighting its powerful motor and fast inflation capabilities, reaching up to 150 PSI.

Image: The Lamicall Portable Inflator Air Compressor displaying its 5000mAh battery capacity and estimated inflation counts for car tires, bicycle tires, motorcycle tires, and basketballs on a full charge.

4.3 Operating Instructions

1. Power On: Press and hold the power button to turn on the inflator. The LED display will light up, showing the current pressure and selected mode.
2. Select Mode: Press the 'M' button to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom. Each mode has a default pressure range.
3. Set Target Pressure: Use the '+' and '-' buttons to adjust the target pressure value. For custom mode, you can set any desired pressure within the device's range.
4. Connect to Item: Securely attach the air hose with the selected nozzle to the valve stem of the item you wish to inflate. Ensure a tight seal to prevent air leakage.
5. Start Inflation: Press the power button briefly to start inflation. The inflator will automatically stop once the preset target pressure is reached.
6. Stop Inflation Manually: To stop inflation before the target pressure is reached, press the power button again.
7. Disconnect: Carefully disconnect the air hose from the valve stem. A small amount of air may escape, which is normal.
8. Power Off: Press and hold the power button to turn off the inflator.

Image: A user demonstrating the Lamicall Portable Inflator Air Compressor, highlighting its ultra-fast inflation and automatic stop feature, capable of inflating a tire from 28 to 36 PSI in under 1 minute.

4.4 LED Light and Power Bank Function

• LED Light: With the inflator powered on, press the light button (usually indicated by a light bulb icon) to cycle through the light modes: Flashlight (Always On), SOS Flashing, and Strobe Light. This is useful for nighttime operation or emergencies.
• Power Bank: The inflator can serve as an emergency power bank. Connect your device's charging cable to the inflator's USB output port to charge your phone or other small electronics.

Image: The Lamicall Portable Inflator Air Compressor demonstrating its LED light functions (Always On, SOS Flashing, Rapid Flash) and its capability to act as an emergency power bank for charging mobile phones.

4.5 Maintenance (Inflator)

• Cleaning: Wipe the exterior of the inflator with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the inflator and its accessories in a dry, cool place. Ensure the battery is partially charged if storing for extended periods to maintain battery health.
• Battery Care: Avoid fully discharging the battery frequently. Recharge when the battery level is low.

5. Car Windshield Sun Shade

5.1 Product Features

• Nano Reflective Coating: Blocks up to 99.9% of UV rays.
• Superior Thermal Insulation: Significantly reduces interior temperature, protecting the car's interior from heat deterioration.
• Perfect Fit: Designed for complete sunlight blockage.
• 2-in-1 Storage Bag: Doubles as a steering wheel cover and allows for compact, foldable storage.

Image: A detailed view of the Lamicall Car Windshield Sun Shade's nano reflective coating, illustrating its UPF 50+ protection against UV rays.

5.2 Installation

1. Unfold: Remove the sun shade from its storage bag and gently unfold it.
2. Position: Place the sun shade against the inside of your car's windshield. Ensure it covers the entire windshield area.
3. Secure: Use your car's sun visors to hold the shade firmly in place against the windshield.

Image: A comparison showing a car interior before and after using the Lamicall Car Windshield Sun Shade, demonstrating superior thermal insulation and a cooler interior temperature.

Image: The Lamicall Car Windshield Sun Shade perfectly fitted in a car's interior, providing complete sunlight blockage. Also shown is the 2-in-1 storage bag, which can be used as a steering wheel cover or for compact storage.

5.3 Storage and Maintenance (Sun Shade)

• Folding: To store, remove the shade from the windshield, twist it into a smaller circle, and place it back into the provided 2-in-1 storage bag.
• Cleaning: Wipe the sun shade with a soft, damp cloth if it becomes dirty. Do not machine wash or use harsh detergents.

6. Specifications

6.1 Portable Inflator Air Compressor

• Max Pressure: 150 PSI
• Airflow Rate: 35 L/Min
• Battery Capacity: 5000 mAh
• Inflation Modes: Car, Motorcycle, Bike, Ball, Custom
• Pressure Units: PSI, KPA, BAR, KG/CM²
• Error Margin: ±2 PSI
• Emergency Light Modes: Flashlight, SOS, Strobe
• Charging Port: USB

6.2 Car Windshield Sun Shade

• Material: Nano Reflective Coating
• UV Protection: Blocks 99.9% UV rays, UPF 50+
• Storage: Foldable design with 2-in-1 storage bag/steering wheel cover

7. Troubleshooting

8. Warranty and Customer Support

Lamicall products come with a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact Lamicall customer support directly.

If you encounter any issues or have questions regarding your Lamicall Car Tire Portable Inflator Air Compressor and Car Windshield Sun Shade, please contact our customer support team:

• Website: Visit the Lamicall Store on Amazon
• Email: (Please refer to product packaging or Lamicall website for current contact information)
• Phone: (Please refer to product packaging or Lamicall website for current contact information)

Please have your product model number (B0FDKPMDKH) and purchase date ready when contacting support.