DOUBLE E Jeep Licensed 1:14 Scale Pink Remote Control Car Instruction Manual

1. Important Safety Information

WARNING: CHOKING HAZARD – Small parts. Not for children under 3 years.

• Please remove batteries if the vehicle will not be used for a long time.
• The battery terminals should never be short-circuited.
• The battery should only be charged under adult supervision.
• Never put the batteries near fire or any source of heat; do not place them in water or leave in direct sunlight.
• Do not charge non-rechargeable batteries.
• Dispose of batteries according to local government regulations.
• Do not put the batteries together with daily trash.
• This product shall be charged for four to five hours. The supporting USB charger shall not be used for devices other than this product.
• Please note that rechargeable battery should be fully charged before first use.

Image: Close-up of the product packaging displaying battery warnings and general instructions.

2. What's in the Box

Your DOUBLE E Jeep Remote Control Car package includes the following items:

• 1 x Jeep Car (Pink)
• 1 x Remote Control
• 1 x Rechargeable Battery Pack (for car)
• 1 x USB Charging Cable
• 1 x Screwdriver
• 1 x Product Manual
• 2 x Sheets of DIY Stickers

Image: The DOUBLE E Jeep RC car, remote control, and two sheets of DIY stickers, indicating the contents of the package.

3. Setup Instructions

3.1. Charging the Car Battery

1. Locate the rechargeable battery pack and the USB charging cable.
2. Connect the battery pack to the USB charging cable.
3. Plug the USB cable into a compatible USB power source (e.g., computer, USB wall adapter).
4. Allow the battery to charge for 4-5 hours for a full charge. The indicator light on the charger will typically change color or turn off when charging is complete.

3.2. Installing Batteries in the Car

1. Using the provided screwdriver, open the battery compartment cover on the underside of the car.
2. Insert the charged rechargeable battery pack, ensuring correct polarity.
3. Securely close the battery compartment cover with the screwdriver.

3.3. Installing Batteries in the Remote Control

1. Open the battery cover at the bottom of the remote controller.
2. Insert 2 x 1.5V AA batteries, ensuring correct polarity. (AA batteries are not included).
3. Close the battery cover.

3.4. Applying DIY Stickers

Personalize your Jeep with the included DIY stickers. Carefully peel and apply them to the car's body as desired.

Image: Illustration of the 3.7V rechargeable battery and its connection to a USB charging cable, highlighting the charging process.

4. Operating Instructions

4.1. Powering On and Pairing

1. Turn on the power switch on the car.
2. Turn on the power switch on the remote controller.
3. The indicator light on the remote controller will flash slowly, then stay solid once paired.
4. One remote controller can only match with one car. After successful matching, there is no interference.
5. If the car is idle for 1 minute, it will enter sleeping state (light off of the indicator). Press any key to activate.
6. To re-pair with other cars or remote controllers, turn off the power of both devices and repeat the pairing process.

4.2. Basic Controls

• Forward/Backward: Use the trigger on the remote control to move the car forward or backward.
• Turning: Use the steering wheel on the remote control to turn the car left or right.

4.3. Features and Performance

• 2.4GHz Technology: Allows multiple cars to be controlled simultaneously without interference, ideal for team play.
• Off-Road Capability: Equipped with strong motor drive, non-slip off-road tires, and independent suspension shocks for conquering various terrains.
• LED Lights: Simulated LED headlights automatically illuminate, enhancing the driving experience, especially in low-light conditions.
• Durable Design: Features crash bumpers and a high-toughness ABS shell for resistance against falls and bumps.

Image: Three girls playing with the pink DOUBLE E Jeep RC car on a sandy beach, demonstrating its off-road capability and 2.4GHz multi-car control.

Image: A child operating the remote control for the pink RC car, with arrows indicating forward, backward, left, and right steering movements.

5. Maintenance

• Cleaning: Wipe the car and remote control with a soft, dry cloth after each use to remove dust and dirt. Avoid using water or harsh chemicals.
• Battery Care: Always remove batteries from both the car and the remote control if they will not be used for an extended period. Store batteries in a cool, dry place.
• Storage: Store the car and remote control in a dry environment, away from direct sunlight and extreme temperatures.
• Inspection: Periodically check for any loose parts, damaged wires, or worn tires. Replace or repair as necessary.

6. Troubleshooting

• Car not responding:
  • Ensure both the car and remote control are powered on.
  • Check if batteries are correctly installed and fully charged in both devices.
  • Re-pair the remote control with the car by turning both off and then on again.
• Short battery life:
  • Ensure the car's rechargeable battery is fully charged (4-5 hours).
  • Replace AA batteries in the remote control if they are depleted.
• Poor performance/control:
  • Ensure you are within the effective range of the remote control.
  • Check for any obstructions or debris in the wheels or suspension.
  • Verify that the steering trim on the remote control is properly adjusted.

7. Specifications

Image: A close-up view of the pink RC car, pointing out its independent suspension shocks, stylish convertible top, simulated LED headlights, high-performance TPR off-road tires, and crash bumpers.

8. Warranty and Support

For any questions, concerns, or support needs regarding your DOUBLE E Jeep Remote Control Car, please contact the manufacturer directly.

• Manufacturer: DOUBLE E
• Phone: 0754-85701666