Introduction
Thank you for choosing the Feyachi RSL-88 Reflex Sight with Green Laser. This manual provides essential information for the safe and effective use, installation, and maintenance of your new optical device. Please read it thoroughly before operation.
Safety Information
Laser Safety: This product contains a Class IIIA green laser with an output of less than 5mW. Avoid direct eye exposure to the laser beam. Never point the laser at aircraft or people. Always ensure the laser is off when not in use. Misuse of laser devices can cause serious eye injury.
Always handle firearms and optical devices responsibly. Ensure the firearm is unloaded and safe before installing, adjusting, or performing maintenance on the sight. Wear appropriate eye protection during use.
What's in the Box
Upon opening your package, please verify that all components are present:
- Feyachi RSL-88 Reflex Sight
- Integrated Green Laser Sight
- Pressure Switch
- Allen Wrench for adjustments
- Cleaning Cloth
- User Manual
- Batteries (CR2032 for reflex sight, LR44 for laser)
Image: All components included with the Feyachi RSL-88 Reflex Sight.
Product Features
- Versatile Reticle Options: Offers 4 distinct reticle patterns and 2 color options (red/green), each with 5 adjustable brightness levels for various lighting conditions.
- Efficient Green Laser Sight: Integrated Class IIIA green laser (<5mW) for rapid target acquisition and enhanced aiming accuracy.
- Easy Zeroing and Adjustment: Includes a wrench for precise windage and elevation adjustments for both the reflex sight and laser.
- Rugged and Weatherproof Construction: Manufactured from high-quality aluminum alloy with an anodized finish, providing corrosion resistance, waterproofing, fog proofing, and shock resistance.
- Integrated Fastener Kit: Features a 20mm mount for quick and secure attachment to standard Picatinny rails.
Image: Overview of the reflex sight's reticle options and brightness settings.
Image: Detail of the green laser sight component.
Setup
1. Battery Installation
For Reflex Sight:
- Locate the battery compartment cap on the top of the reflex sight.
- Unscrew the cap counter-clockwise.
- Insert one CR2032 battery with the positive (+) side facing up.
- Replace the cap and tighten it securely to ensure waterproofing.
For Green Laser Sight:
- Unscrew the rear cap of the laser sight.
- Insert the LR44 batteries (typically 3) with the correct polarity as indicated inside the compartment.
- Replace the cap and tighten it.
Video: Official Feyachi video demonstrating the features and potentially battery installation of the Red Dot Sight.
2. Mounting the Sight
The RSL-88 reflex sight features an integrated 20mm mount designed for standard Picatinny rails.
- Loosen the mounting screw on the side of the sight using the provided Allen wrench.
- Align the sight's base with the Picatinny rail on your equipment.
- Slide the sight onto the rail to your desired position.
- Tighten the mounting screw firmly with the Allen wrench to secure the sight. Do not overtighten.
Image: Illustration of the quick-mount convenience on a Picatinny rail.
3. Attaching the Pressure Switch (Optional)
The included pressure switch allows for momentary or constant activation of the laser sight.
- Remove the standard end cap from the laser sight.
- Screw the pressure switch cable into the rear of the laser sight.
- Secure the pressure switch pad to your equipment using the provided hook-and-loop fastener or other preferred method, ensuring easy access during operation.
Image: The pressure switch connected to the laser for tactical use.
Operating Instructions
1. Reflex Sight Operation
Power On/Off and Brightness Adjustment:
- Rotate the rotary switch located on the side of the sight.
- Turning the switch to 'G' (Green) or 'R' (Red) will power on the sight.
- Continue rotating to increase or decrease the brightness level (1-5).
- Set the switch to '0' to power off the sight.
Reticle Pattern Selection:
- Use the reticle selector knob located at the front of the sight to cycle through the 4 available reticle patterns.
Image: Overview of the reflex sight's reticle options and brightness settings.
2. Laser Sight Operation
Standard Operation:
- Press the button on the end cap of the laser sight to turn it on or off.
Pressure Switch Operation:
- The pressure switch typically has two buttons: one for momentary activation (laser on only while pressed) and one for constant on/off. Refer to the specific pressure switch instructions for details.
3. Zeroing and Adjustment
Zeroing is the process of aligning your sight with the point of impact of your projectile. This should be done at a safe shooting range.
Reflex Sight Adjustment:
- Elevation Adjustment: Use the provided Allen wrench to turn the 'UP' adjustment screw (usually on top of the sight). Turning clockwise moves the point of impact down; counter-clockwise moves it up.
- Windage Adjustment: Use the provided Allen wrench to turn the adjustment screw on the side of the sight. Turning clockwise moves the point of impact left; counter-clockwise moves it right.
Laser Sight Adjustment:
- The laser sight has its own small adjustment screws for windage and elevation. Use a small Allen wrench (often included) to make these adjustments.
- Adjust the laser until its dot aligns with the point of impact or the center of your reflex sight's reticle at your desired zeroing distance.
Image: Detailed view of the windage and elevation adjustment screws for the reflex sight and laser.
Maintenance
- Cleaning Lenses: Use the provided cleaning cloth or a soft, lint-free cloth to gently wipe the lenses. For stubborn dirt, use a small amount of lens cleaning solution. Avoid abrasive materials.
- Body Cleaning: Wipe the body of the sight with a damp cloth to remove dirt and debris.
- Battery Replacement: Replace batteries when the reticle or laser appears dim or fails to illuminate. Always dispose of used batteries responsibly.
- Storage: Store the sight in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
- Weather Resistance: While the sight is waterproof and fog proof, prolonged exposure to extreme conditions should be avoided. Ensure all caps and covers are securely tightened.
Image: Visual representation of the sight's durability and weather resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reticle/Laser does not illuminate | Dead or incorrectly installed battery; loose battery cap; power switch off. | Check battery polarity, replace batteries, ensure caps are tight, turn power switch on. |
| Reticle/Laser is dim or flickers | Low battery power; loose battery connection. | Replace batteries, ensure battery caps are tight. |
| Sight does not hold zero | Mounting screws are loose; improper zeroing procedure; excessive recoil for application. | Ensure mounting screws are tightened securely. Re-zero the sight carefully. Verify compatibility with equipment. |
| Reticle appears distorted or blurry | Dirty lens; eye relief issue; astigmatism (user-related). | Clean lenses. Adjust head position for optimal eye relief. If issue persists, consult an optometrist. |
Specifications
| Feature | Detail |
|---|---|
| Magnification | 1x |
| Objective Aperture | 33mm |
| Field of View | 15.8° at 100m |
| Windage/Elevation Click Value | 1 MOA per Click |
| Adjustment Range | +/- 30 MOA |
| Eye Relief | Unlimited |
| Laser Color | Green |
| Laser Output | Class IIIA (<5mW) |
| Batteries | 2x CR2032 (Reflex Sight) / 6x LR44 (Laser Sight) |
| Material | Aluminum Alloy |
| Mounting Type | Picatinny Mount (20mm) |
| Product Dimensions | 3.6"L x 2.1"W x 2.3"H |
| Item Weight | 0.5 Pounds |
Image: Visual display of key specifications and the sight in action.
Warranty and Support
The Feyachi RSL-88 Reflex Sight comes with a 1-year warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, unauthorized modification, or normal wear and tear.
For warranty claims, technical support, or any questions regarding your product, please contact Feyachi customer service through the retailer where the product was purchased or visit the official Feyachi website for contact information.
Please retain your proof of purchase for warranty validation.