1. Product Overview
The Gosvor Pivot is a state-of-the-art cordless robotic pool cleaner designed for inground pools up to 1,100 Sq.ft. It offers comprehensive cleaning of floors, slopes, and walls, ensuring a pristine swimming environment. Equipped with an advanced dual-motor system and powerful suction, it efficiently removes dirt and debris. Its lightweight design and self-parking feature enhance user convenience.
Figure 1: Front view of the Gosvor Pivot Robotic Pool Cleaner.
2. Important Safety Instructions
Please read all instructions carefully before operating the Gosvor Pivot. Failure to follow these instructions may result in property damage, serious injury, or death.
- Always disconnect the cleaner from the charger before performing any maintenance or cleaning.
- Do not operate the cleaner if the power cord or charger is damaged.
- Ensure the charging port is dry before connecting the charger.
- Keep hands, hair, and loose clothing away from moving parts.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
- Only use the charger supplied by the manufacturer.
- Do not use the cleaner to pick up flammable or combustible liquids.
- Store the cleaner in a cool, dry place when not in use.
3. Package Contents
Verify that all items are present in the package:
- Gosvor Pivot Robotic Pool Cleaner Unit
- Power Adapter/Charger
- User Manual
4. Getting Started
4.1 Charging the Battery
Before first use, fully charge the cleaner's battery. A full charge typically takes approximately 3 hours.
- Ensure the cleaner is dry and clean.
- Locate the charging port on the cleaner.
- Connect the power adapter to the charging port, then plug the adapter into a standard electrical outlet.
- The indicator light on the cleaner will show charging status (refer to cleaner's specific light indicators for details).
- Once fully charged, disconnect the charger.
Figure 2: The Gosvor Pivot connected to its charger, illustrating the fast charging capability.
4.2 Initial Placement in Pool
Carefully lower the cleaner into the pool. Ensure it sinks to the bottom and no air bubbles are trapped underneath.
5. Operation
5.1 Starting a Cleaning Cycle
The Gosvor Pivot features an intuitive control button for simplified operation.
- Ensure the cleaner is fully charged.
- Place the cleaner into the pool.
- Press the power button (refer to the cleaner's specific button location). The cleaner will begin its cleaning cycle automatically.
5.2 Wall and Floor Cleaning
The Gosvor Pivot is designed to clean both the floor and walls of your inground pool, providing a comprehensive cleaning solution. Its advanced algorithms and responsive navigation system ensure thorough coverage.
Figure 3: The Gosvor Pivot demonstrating its ability to clean both pool walls and floors.
5.3 Self-Parking Feature
When the battery level is low, the Gosvor Pivot will automatically navigate itself to the side of the pool for easy retrieval. This feature prevents the cleaner from stopping in the middle of the pool when its battery is depleted.
Figure 4: The Gosvor Pivot utilizing its self-parking technology to return to the pool edge.
6. Care and Maintenance
6.1 Cleaning the Filter
The Gosvor Pivot features a spacious fine filter designed to capture a wide range of debris. Regular cleaning of the filter is crucial for optimal performance.
- Remove the cleaner from the pool.
- Open the filter compartment (refer to your cleaner's specific design for access).
- Remove the filter basket/cartridge.
- Rinse the filter thoroughly with a garden hose until all debris is removed.
- Inspect the filter for any damage and replace if necessary.
- Reinsert the clean filter and close the compartment securely.
Figure 5: Illustration of the powerful active brushes, which contribute to effective debris collection into the filter.
6.2 Draining and Storage
After each use, or before storing for an extended period, ensure the cleaner is properly drained and stored.
- Remove the cleaner from the pool.
- Allow the cleaner to drain completely. The quick drainage feature allows for rapid water expulsion.
- Wipe down the exterior of the cleaner with a soft cloth.
- Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures.
Figure 6: The Gosvor Pivot being removed from the pool, highlighting its lightweight design and quick drainage.
7. Troubleshooting Guide
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner does not start | Battery is low or depleted. | Charge the cleaner fully. |
| Cleaner moves slowly or erratically | Filter is clogged with debris. | Clean the filter thoroughly. |
| Cleaner does not pick up debris effectively | Filter is dirty or damaged; brushes are worn. | Clean or replace the filter; inspect and replace brushes if necessary. |
| Cleaner stops mid-cycle | Battery is depleted. | Retrieve cleaner and recharge. |
8. Technical Specifications
| Feature | Specification |
|---|---|
| Model Name | Pivot |
| Brand | Gosvor |
| Color | Gray |
| Product Dimensions | 13.4"L x 13.2"W x 6.8"H |
| Power Source | Battery Powered |
| Max Pool Area | Up to 1,100 Sq.ft |
| Battery Life (Approx.) | 100 minutes |
| Charging Time (Approx.) | 3 hours |
9. Warranty and Customer Support
The Gosvor Pivot Robotic Pool Cleaner comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including coverage duration and limitations.
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Gosvor customer support. Contact information can typically be found on the product packaging, the official Gosvor website, or your purchase receipt.
When contacting support, please have your product model name (Pivot) and purchase information readily available to expedite assistance.
