roborock H60 Cordless Stick Vacuum Cleaner User Manual

1. Safety Instructions

Please read this user manual carefully before using the roborock H60 Cordless Stick Vacuum Cleaner and retain it for future reference. Failure to follow the instructions may result in electric shock, fire, or serious injury.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not use the appliance outdoors or on wet surfaces.
• Do not handle plug or appliance with wet hands.
• Do not use without dust cup and filters in place.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Exercise extra care when cleaning on stairs.
• Unplug from outlet when not in use and before servicing.

2. Package Contents

The roborock H60 Cordless Stick Vacuum Cleaner package includes the following components:

• roborock H60 Vacuum (Main Unit)
• Adapter
• Bendable Tube
• Floor Brush
• 2-in-1 Crevice Brush
• User Manual
• Wall Mount

3. Assembly

Follow these steps to assemble your roborock H60 vacuum cleaner:

1. Main Unit and Extension Rod: Insert one end of the extension rod into the main vacuum body until it clicks securely into place.
2. Extension Rod and Floor Brush: Attach the other end of the extension rod to the floor brush, ensuring it aligns with the conductive pins and clicks into place.
3. Wall Mount Installation: The included wall mount can be installed in a convenient location for storage and charging. Refer to the detailed instructions in the printed User Manual for wall mounting procedures.

Image: The roborock H60 main unit, extension rod, floor brush, and various attachments, including the wall mount.

4. Charging

Ensure the battery is fully charged before first use to optimize performance and runtime.

• Initial Charge: Connect the adapter to the charging port on the main unit or the wall mount. The LED display will indicate charging status.
• Charging Indicator: The display will show a charging icon and battery percentage. Once it reaches 100%, the charging process is complete.
• Charging Options: The vacuum can be charged directly by plugging the adapter into the main unit, or by placing it on the wall mount connected to the adapter.

5. Operating Instructions

Familiarize yourself with the vacuum's controls and features for effective cleaning.

• Power On/Off: Press the power button on the main unit to turn the vacuum on or off.
• Suction Modes: Cycle through ECO, MED, and MAX modes using the mode selection button to adjust suction power for different cleaning needs. The LED display shows the current mode.
• Dust-Revealing LED: The 140° wide-angle green LED headlight on the floor brush illuminates fine dust and debris on hard floors and carpets, enhancing visibility in dimly lit areas.
• 90° Bendable Tube: Utilize the bendable tube to easily clean under furniture and other low-clearance areas without excessive bending.
• Attachments: The 2-in-1 crevice brush is suitable for upholstery, tight gaps, and car interiors. The rubber-fiber roller is designed for both hard floors and carpets.

Image: The roborock H60 vacuum cleaner in action, illustrating its 115AW suction power on a hard floor.

Image: The roborock H60's floor brush with its 140-degree wide-angle green LED headlight, highlighting hidden dust on a floor.

Image: A user demonstrating the roborock H60's 90-degree bendable tube for cleaning under low furniture.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

• Dustbin Emptying: Empty the 500 ml dustbin regularly to prevent loss of suction.
• Filter Cleaning: The 5-stage filtration system includes washable parts (metal mesh, sponge filter, multi-cyclone component, post-motor filter). Clean these components as needed to maintain filtration efficiency. Ensure all parts are completely dry before reassembly.
• Anti-Tangle Brush: The anti-tangle brush with a serrated design minimizes hair wrapping. Periodically check and clean the brush roller to remove any accumulated hair or debris.

Image: A diagram illustrating the roborock H60's 5-stage filtration system, highlighting its components.

7. Troubleshooting

If you encounter issues with your vacuum cleaner, refer to the following common solutions:

• No Power: Ensure the battery is fully charged. Check that the power adapter is correctly connected.
• Weak Suction: Empty the dustbin. Clean all filters and ensure they are dry before reassembly. Check the brush roller and extension tube for blockages.
• Brush Not Rotating: Check the brush roller for tangled hair or debris and remove any obstructions.

For more detailed troubleshooting or persistent issues, please consult the full User Manual or contact roborock customer support.

8. Specifications

9. Warranty & Support

For warranty information, product registration, or to contact customer support, please refer to the official roborock website or the warranty card included in your product packaging.