Greenworks 48V (24V x 2) 20" Cordless Battery Mower, 12" String Trimmer/Edger, & 320 CFM Blower Combo Kit

Introduction

This manual provides essential instructions for the safe assembly, operation, maintenance, and troubleshooting of your Greenworks 48V (24V x 2) Cordless Combo Kit. This kit includes a 20-inch lawn mower, a 12-inch string trimmer/edger, and a 320 CFM blower, along with batteries and chargers. Please read this manual thoroughly before using the products to ensure proper function and safety.

Image: The Greenworks 48V Cordless Mower, Trimmer, and Blower Combo Kit, showcasing all three tools and batteries.

Safety Information

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep this manual for future reference.

• Read All Instructions: Familiarize yourself with the controls and proper use of each tool.
• Wear Appropriate Personal Protective Equipment (PPE): Always wear safety glasses or goggles, hearing protection, long pants, and sturdy footwear when operating any of these tools.
• Keep Area Clear: Ensure bystanders, children, and pets are at a safe distance from the operating area.
• Avoid Wet Conditions: Do not operate power tools in damp or wet locations.
• Remove Battery: Always remove the battery pack from the tool before making adjustments, changing accessories, cleaning, or storing the tool.
• Use Correct Batteries and Chargers: Only use Greenworks 24V batteries and chargers specified for this product.
• Maintain Tools: Keep cutting tools sharp and clean for better and safer performance.

Package Contents

Verify that all items are present upon unpacking. If any parts are missing or damaged, contact customer service.

• 1 x 20" Cordless Lawn Mower
• 1 x 12" Cordless String Trimmer/Edger
• 1 x 320 CFM Cordless Blower
• 2 x 4.0Ah USB Batteries
• 1 x 2.0Ah Battery
• 2 x Battery Chargers
• Grass Collection Bag (for mower)
• Side Discharge Chute (for mower)
• Trimmer Guard
• Blower Nozzle

Image: A diagram highlighting the main components of the Greenworks mower, including the batteries and charger.

Setup

Battery Charging and Installation

1. Charge Batteries: Insert the 4.0Ah and 2.0Ah batteries into the provided chargers. Connect the chargers to a standard power outlet. The indicator light on the charger will show the charging status. Ensure batteries are fully charged before first use.
2. Install Battery: Align the battery pack with the battery port on the tool (mower, trimmer, or blower) and slide it in until it clicks securely into place. Ensure it is fully seated.
3. Remove Battery: Press the battery release button and pull the battery pack out of the tool.

Lawn Mower Assembly

1. Unfold Handles: Release the quick-release levers on the mower handles and unfold them into the operating position. Secure the levers.
2. Attach Grass Bag: Hook the grass collection bag onto the rear discharge opening of the mower.
3. Install Side Discharge Chute (Optional): Lift the side discharge cover and slide the side discharge chute into place.

Image: The Greenworks mower demonstrating its quick-fold handle for compact storage and vertical storage capability.

String Trimmer Assembly

1. Attach Guard: Secure the trimmer guard to the trimmer head using the provided screws.
2. Assemble Auxiliary Handle: Attach the auxiliary handle to the trimmer shaft and adjust it to a comfortable operating position.
3. Extend Telescoping Shaft: Adjust the shaft length to suit your height for comfortable operation.

Image: A visual guide showing how to insert the battery into the trimmer, the lock-out button, auto-feed head, and Torqdrive system.

Blower Assembly

1. Attach Nozzle: Slide the blower nozzle onto the blower housing until it locks into place.

Operating Instructions

Lawn Mower Operation

1. Adjust Cutting Height: Use the single-lever height adjustment to select one of the 7 cutting positions. Adjust based on grass type and desired length.
2. Start Mower: Insert a charged 48V (2x24V) battery. Press and hold the safety button, then pull the bail lever towards the handle. Release the safety button.
3. Stop Mower: Release the bail lever.
4. Mowing Techniques: For best results, mow in straight, overlapping lines. Use the rear bag for collection, the mulching plug for fine clippings, or the side discharge chute for dispersing clippings.
5. Turbo Button: Press the turbo button for a temporary power boost when cutting through thick grass or for enhanced leaf pick-up.

Image: The Greenworks mower demonstrating its 4-in-1 mowing versatility, including rear bagging, mulching, side discharge, and turbo mode.

String Trimmer Operation

1. Start Trimmer: Insert a charged 24V battery. Press the safety lock-out button, then squeeze the variable speed trigger.
2. Stop Trimmer: Release the variable speed trigger.
3. Trimming: Hold the trimmer at an angle, using the tip of the line to cut grass. Avoid contact with hard surfaces.
4. Edging: Rotate the trimmer head (twist-to-edge technology) to the edging position. Use the guide wheel for precise edging along sidewalks and driveways.
5. Line Feed: The trimmer features an auto-feed line system, which automatically extends the line as needed during operation.

Image: The Greenworks string trimmer converting from trimming to edging mode, highlighting its dual functionality.

Blower Operation

1. Start Blower: Insert a charged 24V battery. Squeeze the variable speed trigger.
2. Stop Blower: Release the variable speed trigger.
3. Speed Control: Use the variable speed trigger to adjust airflow. The 2-speed control switch allows selection between low and high power settings for different tasks.
4. Blowing Technique: Sweep from side to side, moving debris forward. For stubborn debris, use the higher speed setting.

Image: A person using the Greenworks blower to clear leaves and debris from a lawn, demonstrating its effectiveness.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your tools. Always remove the battery before performing any maintenance.

General Cleaning

• Clean all tools after each use with a damp cloth. Do not use solvents or harsh chemicals.
• Keep air vents clear of debris to prevent overheating.

Lawn Mower Maintenance

• Blade Inspection: Regularly inspect the mower blade for sharpness and damage. A dull blade can tear grass, leading to an unhealthy lawn.
• Blade Replacement/Sharpening: If the blade is dull or damaged, have it sharpened or replaced by a qualified service technician.
• Deck Cleaning: Clear grass clippings from the underside of the mower deck to maintain cutting efficiency.

String Trimmer Maintenance

• Line Replacement: Replace the trimmer line when it runs out. Refer to the trimmer's specific instructions for correct line type and loading procedure.
• Guard Cleaning: Keep the trimmer guard clean and free of debris.

Battery and Charger Maintenance

• Store batteries in a cool, dry place away from direct sunlight and moisture.
• Do not store batteries in a discharged state for extended periods. Charge them periodically.
• Inspect chargers and battery terminals for damage.

Troubleshooting

Refer to this section for common issues and their solutions.

Specifications

• Brand: Greenworks
• Model Number: 1366302-VK2
• Power Source: Battery Powered (48V, using 2 x 24V batteries)
• Lawn Mower:
  • Cutting Width: 20 inches
  • Deck Material: Heavy-duty steel
  • Height Adjustment: 7-position, single-lever
  • Features: Brushless motor, LED headlights, 4-in-1 (rear bag, mulch, side discharge, turbo button), Quick-fold handle, Vertical storage
  • Run-Time: Up to 45 minutes with 2 fully charged 4.0Ah batteries (varies by conditions)
• String Trimmer/Edger:
  • Cutting Width: 12 inches
  • Features: Twist-to-edge technology, Auto-feed line, Telescoping shaft, Adjustable auxiliary handle, Double safety protection
  • Weight: 5.18 lbs (without battery)
• Blower:
  • Airflow: Up to 320 CFM
  • Air Speed: Up to 90 MPH
  • Features: Variable speed trigger, 2-speed control
• Batteries Included: (2) 4.0Ah USB Batteries, (1) 2.0Ah Battery
• Chargers Included: (2) Chargers
• Item Weight (Combo): Approximately 70 Pounds
• Assembly Required: Yes

Warranty and Support

Warranty Information

This Greenworks product is covered by a 3-Year Tool & Battery Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Image: A graphic indicating the 3-year tool and battery warranty for Greenworks products.

Customer Support

For technical assistance, warranty service, or to order replacement parts, please contact Greenworks customer service or the seller, Powertool Honor US. Have your model number (1366302-VK2) and date of purchase available when contacting support.

Seller: Powertool Honor US

For contact information, please refer to your purchase documentation or the seller's page on Amazon.