PROALLER 50x60in Green Heated Electric Blanket Instruction Manual

1. Introduction

Thank you for choosing the PROALLER 50x60in Green Heated Electric Blanket. This blanket is designed to provide warmth and comfort with its reversible soft flannel and Sherpa cashmere materials. It features multiple heat settings and an automatic shut-off timer for safe and convenient use. Please read this manual thoroughly before operating your heated blanket to ensure proper use and maintenance.

Image: The PROALLER Heated Blanket features a reversible design with soft flannel on one side and plush Sherpa on the other, offering dual textures for comfort.

2. Safety Instructions

Your safety is paramount. This heated blanket is equipped with an overheat and overcurrent protection system and complies with ETL, FCC, and ICES certifications. Always follow these safety guidelines:

• Do not fold or curl up the blanket tightly during use, as this can cause localized overheating.
• Do not press the blanket with heavy objects or use it with other heating products.
• Ensure the controller and power cord are not damaged before each use.
• Always unplug the blanket when not in use or before cleaning.
• Keep pets away from the blanket to prevent damage to the heating elements.
• Do not use if wet.

Image: Visual warnings against folding, pressing, or combining the heated blanket with other heating devices to prevent overheating and damage.

3. Setup

To set up your PROALLER Heated Electric Blanket:

1. Unpack the blanket and controller from its packaging.
2. Lay the blanket flat on your desired surface (couch, bed, etc.).
3. Locate the connector on the blanket. Firmly plug the controller's power cord into this connector until it clicks into place.
4. Plug the power cord into a standard electrical outlet.

Image: The blanket's controller showing its connection point and control buttons for heat and timer settings.

Setup Video Guide

Video: This video demonstrates the unboxing and initial setup of a HOMLYNS heated blanket, including connecting the controller and showcasing the soft fabric.

4. Operating Instructions

The PROALLER Heated Electric Blanket features 10 adjustable heat settings and a 1-9 hour programmable timer with an automatic cut-off feature.

1. Power On/Off: Press the power button on the controller to turn the blanket on or off.
2. Adjust Heat Settings: Use the heat adjustment buttons to cycle through 10 heat levels. The indicator lights on the controller will show the selected heat level.
3. Set Timer: Use the timer adjustment buttons to set the automatic shut-off timer from 1 to 9 hours. The blanket will automatically turn off after the set time.

Image: The blanket's internal heating elements are shown, along with the controller displaying 10 heat settings for precise temperature control.

Operation Video Guide

Video: This video provides a brief overview of a flannel heated throw, highlighting its soft texture and simple controller operation.

5. Maintenance

To ensure the longevity and cleanliness of your heated blanket, follow these washing instructions:

• Disconnect: Always ensure the remote controller and cable are fully detached from the blanket before washing.
• Machine Wash: Machine wash the blanket gently at 86°F (about 30°C) on a delicate cycle.
• Do Not Use Hot Water: Avoid using hot water as it may damage the heating elements.
• Do Not Dry-Clean: Dry cleaning is not recommended.
• Air Dry: Hang the blanket to air dry or lay it flat. Do not put it in a tumble dryer.
• Do Not Iron: Do not iron the blanket.

Image: Step-by-step visual guide for machine washing the heated blanket, emphasizing the detachment of the controller and specific care instructions.

6. Troubleshooting

If you encounter issues with your heated blanket, refer to the following common solutions:

• Blanket Not Heating: Ensure the power cord is securely plugged into both the blanket connector and the wall outlet. Check if the power button on the controller is pressed and a heat setting is selected.
• Uneven Heating: Ensure the blanket is laid flat and not folded or bunched up, which can prevent even heat distribution.
• Automatic Shut-off Too Soon: Verify the timer setting on the controller. The blanket has an automatic shut-off feature for safety.
• Controller Lights Not On: Check the power connection. If the issue persists, contact customer support.

Troubleshooting Video Guide

Video: This video showcases the Cozorbt Electric Blanket in use, demonstrating its features and comfort, which can help in understanding normal operation.

7. Specifications

8. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your purchase receipt for any warranty claims.