1. Introduction
Thank you for choosing the OSRAM ENDURA FLOOD PC 30W LED Projector with Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED floodlight. Please read these instructions carefully before installation and keep them for future reference.
2. Safety Information
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
- Product Integrity: Do not modify or alter the product in any way. Any modifications may void the warranty and create safety hazards.
- Operating Environment: This product is designed for outdoor use (IP44 rated). Do not immerse it in water or expose it to extreme conditions beyond its specified operating range.
- Light Source: The LED light source is integrated and not replaceable. Do not attempt to open the light fixture.
- Mounting: Ensure the mounting surface is strong enough to support the weight of the fixture.
3. Product Overview
The OSRAM ENDURA FLOOD PC 30W LED Projector is a powerful and efficient outdoor lighting solution featuring an integrated motion sensor for enhanced security and energy saving. It provides 3000 lumens of warm white light (3000K) and is constructed from durable aluminum with an IP44 rating for weather resistance.

Image 3.1: OSRAM ENDURA FLOOD PC 30W LED Projector with Sensor and its retail packaging.
Key Features:
- Powerful 30W LED projector with warm white light (3000K).
- High-quality motion detector with a 9m sensor range.
- 3000 lumens output for effective illumination.
- Durable reinforced aluminum construction with safety glass.
- IP44 weather resistance for reliable outdoor use.
- Adjustable time control for motion detection (5 seconds to 10 minutes).
- Energy-efficient design (Energy Class F light source).
4. Setup and Installation
Before beginning installation, ensure the main power supply is switched off at the circuit breaker to prevent electric shock.
4.1 Components Check
Verify that all components are present and undamaged:
- 1x OSRAM ENDURA FLOOD PC 30W LED Projector with Sensor
- Mounting bracket (pre-attached)
- Instruction manual
4.2 Mounting the Fixture
- Choose a suitable wall or surface for mounting, ensuring it can support the fixture's weight and allows for optimal sensor coverage.
- Use the pre-attached mounting bracket as a template to mark the drilling points on the wall.
- Drill holes and insert appropriate wall plugs (not supplied, choose based on wall material).
- Secure the mounting bracket to the wall using screws.
- Attach the floodlight to the mounting bracket, ensuring it is firmly secured. The bracket allows for vertical adjustment of the light direction.

Image 4.1: Dimensional diagram of the floodlight (133mm width, 189mm height, 65mm depth).
4.3 Electrical Connection
This step must be performed by a qualified electrician.
- Ensure the power supply is OFF.
- Connect the floodlight's electrical cable to your main power supply. The cable typically includes three wires: Live (brown), Neutral (blue), and Earth (green/yellow).
- Ensure all connections are secure and properly insulated.
- Once connections are complete, restore power to the circuit.
5. Operating Instructions
The OSRAM ENDURA FLOOD PC 30W LED Projector features an adjustable motion sensor. The sensor controls are located on the underside of the sensor unit.

Image 5.1: Back of packaging illustrating sensor control locations and specifications.
5.1 Sensor Adjustments
The sensor typically has three adjustable settings:
- TIME: Adjusts the duration the light stays on after motion is detected. This can usually be set from 5 seconds to 10 minutes. Turn the dial clockwise to increase the duration, counter-clockwise to decrease.
- LUX/DAYLIGHT: Adjusts the ambient light level at which the sensor becomes active. Turn the dial towards the 'sun' icon for day and night operation, or towards the 'moon' icon for night-only operation.
- SENS/DISTANCE: Adjusts the sensitivity of the motion sensor, controlling the detection range (up to 9m). Turn the dial clockwise to increase sensitivity/range, counter-clockwise to decrease.
Experiment with these settings to find the optimal configuration for your specific application.
6. Maintenance
The OSRAM ENDURA FLOOD PC 30W LED Projector is designed for minimal maintenance.
- Cleaning: Periodically clean the fixture's surface and sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the power cable and housing for any signs of damage. If damage is found, disconnect power immediately and have the fixture inspected by a qualified technician.
- Light Source: The LED light source is integrated and does not require replacement.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Sensor settings incorrect. Faulty wiring. | Check power connection and circuit breaker. Adjust LUX/DAYLIGHT and TIME settings. Consult a qualified electrician. |
| Light stays on continuously. | Continuous motion detected. TIME setting too long. LUX/DAYLIGHT setting too high. | Check for obstructions or constant movement in sensor range. Adjust TIME setting to a shorter duration. Adjust LUX/DAYLIGHT setting to a lower sensitivity. |
| Light turns on too frequently. | Sensor sensitivity too high. Sensor detecting unwanted movement (e.g., trees, animals). | Adjust SENS/DISTANCE setting to a lower sensitivity. Reposition the sensor or adjust its angle to exclude unwanted areas. |
| Light flickers. | Unstable power supply. Loose wiring connection. | Check power source stability. Consult a qualified electrician to check wiring. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | OSRAM |
| Model Number | 4099854487217 |
| Power Consumption | 30W |
| Luminous Flux | 3000 lm |
| Color Temperature | 3000K (Warm White) |
| Voltage | 220 Volt (AC) |
| Motion Sensor Range | Up to 9m |
| Timed Control | 5 seconds - 10 minutes |
| IP Rating | IP44 (Water Resistant) |
| Material | Aluminum, Glass |
| Dimensions (LxWxH) | 13.3L x 6.5W x 18.9H cm |
| Weight | 490 Grams |
| Energy Efficiency Class | F |
| Connectivity Protocol | Amazon Alexa (Voice Control) |
9. Warranty and Support
OSRAM products are manufactured to high-quality standards and come with a manufacturer's warranty. Please refer to your purchase documentation or the official OSRAM website for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact OSRAM customer service through their official website or the retailer from whom you purchased the product.





