KEKOY Heavy Duty Shower Chair with Back

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your KEKOY Heavy Duty Shower Chair with Back, Model 201D-1. Please read this manual thoroughly before use and retain it for future reference. This shower chair is designed to provide stable and comfortable seating assistance in shower or bath environments for individuals requiring support.

2. Safety Information

Important: Failure to follow these safety instructions may result in injury or damage to the product.

• Ensure all components are securely fastened before each use.
• Do not exceed the maximum weight capacity of 350 pounds (158 kg).
• Always ensure all four legs are evenly adjusted and firmly on the ground to prevent tipping.
• Do not stand on the shower chair. It is intended for seated use only.
• Exercise caution when transferring onto and off the chair. Use grab bars if available.
• Regularly inspect the chair for wear, damage, or loose parts. Discontinue use if any damage is found.
• Keep the chair clean and dry to prevent mold or mildew growth.
• The EVA padded seat and backrest are detachable for cleaning. Avoid prolonged exposure to water for the pads to maintain their integrity.

3. Package Contents

Verify that all the following components are present before assembly:

• Shower Chair Frame (pre-assembled sections)
• Seat Panel with Drainage Holes
• Backrest Panel
• Leg Extensions with Rubber Feet (4)
• EVA Padded Seat Cushion (optional)
• EVA Padded Backrest Cushion (optional)
• Assembly Hardware (screws, washers, wing nuts)
• Instruction Manual

4. Assembly Instructions

No tools are required for assembly. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
2. Attach Leg Extensions: Insert each leg extension into the main frame until the spring button clicks into place. Ensure the rubber feet are securely attached to the bottom of each leg.
3. Attach Seat Panel: Place the seat panel onto the frame, aligning the holes. Secure it using the provided screws and wing nuts. Tighten firmly by hand.
4. Attach Backrest Panel: Insert the backrest support rods into the designated slots on the frame. Align the holes and secure with the remaining screws and wing nuts. Tighten firmly by hand.
5. Optional Padded Cushions: If desired, attach the EVA padded seat and backrest cushions to their respective panels. These are typically self-adhesive or designed to fit snugly.
6. Final Check: Before first use, ensure all screws and wing nuts are tightened and the chair is stable.

5. Operating Instructions

Using your shower chair effectively and safely:

• Height Adjustment: The chair features 5 levels of height adjustment. To adjust, press the spring button on each leg and slide the leg extension to the desired height. Ensure all four legs are adjusted to the same height and the spring buttons are fully engaged in the adjustment holes before use. The height can be adjusted from 15 to 19 inches.
• Placement: Position the shower chair securely in your shower or bathtub. Ensure all four rubber feet are firmly on a flat, non-slip surface.
• Showerhead Holder: The integrated showerhead holder is designed to fit most standard showerheads. Place your showerhead into the holder for hands-free showering, enhancing convenience.
• Transferring: Approach the chair carefully. Use any available grab bars for support during transfer. Sit down slowly and center your weight on the seat.

6. Maintenance and Cleaning

Proper maintenance ensures the longevity and hygiene of your shower chair:

• Regular Cleaning: Clean the chair regularly with mild soap and water. Rinse thoroughly and dry completely after each cleaning to prevent water spots and mineral buildup.
• Padded Cushions: The EVA padded cushions are detachable for easier cleaning. Clean them separately with mild soap and water, then air dry completely before reattaching. Avoid harsh chemicals or abrasive cleaners.
• Inspection: Periodically check all connections, screws, and rubber feet for tightness and wear. Replace any worn or damaged parts immediately.
• Storage: When not in use, store the chair in a dry, well-ventilated area.

7. Troubleshooting

Common issues and their solutions:

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact KEKOY customer service. Details can typically be found on the product packaging or the official KEKOY website. Please have your model number (201D-1) and purchase information ready when contacting support.