Introduction
This manual provides detailed instructions for the safe and effective operation of your Godox V480N TTL Flash for Nikon. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage to the unit or injury to yourself.
Safety Information
- Do not disassemble or modify the flash unit.
- Keep the unit dry. Do not expose to rain or moisture.
- Keep out of reach of children.
- Use only the specified battery and charger.
- Avoid direct eye exposure to the flash light.
Product Overview
The Godox V480N is a high-performance TTL flash designed for Nikon cameras, featuring a built-in 2.4G wireless system, a 2.0-inch color touchscreen, and a powerful lithium battery.
Components
Figure 1: Godox V480N TTL Flash unit with included accessories including a mini stand, diffuser, storage bag, adapter, lithium battery, and USB-C charging cable.
- Flash Head
- 2.0" Color Touchscreen
- Control Dial and Buttons
- Hot Shoe Mount
- Battery Compartment
- USB-C Port (for firmware updates)
- Modeling Lamp
- Built-in Diffuser and Catchlight Panel
Setup
1. Battery Installation and Charging
Figure 2: The V480N uses a 7.2V/2200mAh rechargeable lithium battery, which can be charged via USB-C.
- Open the battery compartment cover.
- Insert the 7.2V/2200mAh lithium battery, ensuring correct polarity.
- Close the battery compartment cover.
- To charge the battery, connect the USB-C charging cable to the battery's USB-C port and a power source. The battery can be charged independently or while inserted in the flash.
2. Mounting the Flash to Your Camera
Figure 3: The Godox V480N TTL Flash securely mounted on a Nikon camera's hot shoe.
- Slide the flash hot shoe onto your Nikon camera's hot shoe mount.
- Rotate the locking lever clockwise until the flash is securely fastened.
Operating Instructions
1. Power On/Off and Basic Interface
Figure 4: The 2.0-inch color touchscreen and tactile buttons provide intuitive control over flash settings.
- Press and hold the power button to turn the flash on or off.
- The 2.0-inch color touchscreen allows for quick adjustments. Tap, swipe, or use the control dial and buttons to navigate menus and change parameters.
2. Flash Modes
Figure 5: The V480N supports TTL auto flash for accurate exposure and includes a built-in LED modeling lamp.
- TTL Auto Flash Mode: The flash automatically adjusts output for correct exposure. Supports flash exposure compensation (FEC) up to ±3 EV.
- Manual (M) Mode: Allows manual control over flash power from 1/256 to 1/1 in 0.1 or 0.3 stop increments.
- Multi (Stroboscopic) Mode: Fires a series of rapid flashes for creative motion effects.
- High-Speed Sync (HSS): Enables flash synchronization at shutter speeds up to 1/8000s, useful for freezing fast action or using wide apertures in bright conditions.
- Front/Rear-Curtain Sync: Choose between synchronizing the flash at the beginning or end of the exposure for dynamic motion effects.
3. 2.4G Wireless X System
Figure 6: The V480N integrates with the Godox 2.4G X wireless system, allowing it to function as both a sender and receiver.
- The V480N can act as a master or slave unit within the Godox 2.4G X wireless system.
- Supports 5 groups (M, A, B, C, D) and 32 channels (CH1-CH32).
- Wireless ID settings (OFF/01-99) prevent interference.
- Transmission distance is approximately 100m (328ft).
- One-tap synchronous pairing simplifies setup with other Godox X system devices.
4. Modeling Lamp and Light Shapers
Figure 7: The flash head includes a slide-out catchlight panel and a snap-on wide-angle diffuser for versatile lighting control.
- The 2W LED modeling lamp (5300K±300) has 10 adjustable levels for previewing light effects or serving as a fill light.
- A built-in reflector and slide-out catchlight panel help create sparkling eye reflections.
- A snap-on wide-angle diffuser is included to soften and broaden light coverage. When the diffuser is used, the flash zoom is fixed at 14mm.
5. Flexible Bounce Head
Figure 8: The flash head can tilt from -7° to 120° vertically and swivel 330° horizontally for precise bounce lighting.
- The flash head can be tilted from -7° to 120° and swiveled 330° for various bounce and off-axis lighting techniques.
Maintenance
- Clean the flash unit regularly with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- Ensure the hot shoe contacts are clean and free of debris.
- When not in use for extended periods, remove the battery and store the flash in a cool, dry place.
- Periodically check for firmware updates on the Godox official website and update the flash via the USB-C port if available.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire. | Low battery; incorrect camera settings; flash not securely mounted. | Charge or replace battery; check camera flash settings; ensure flash is securely mounted and locked. |
| Flash output is inconsistent. | Incorrect flash mode; environmental interference in wireless mode. | Verify flash mode (TTL/M); change wireless channel or ID. |
| Flash overheats. | Excessive continuous firing. | Allow the flash to cool down. Reduce the frequency of full-power flashes. |
| Touchscreen unresponsive. | Temporary software glitch. | Turn the flash off and on again. If issue persists, check for firmware updates. |
Specifications
| Feature | Detail |
|---|---|
| Model | V480N |
| Guide Number (GN) | 50 (at ISO 100, 105mm) |
| Flash Coverage | 24 to 105mm (Auto/Manual Zoom) |
| Flash Duration | 1/300 to 1/20000 seconds |
| Exposure Control System | TTL Autoflash, Manual Flash, Multi Flash |
| Flash Exposure Compensation (FEC) | ±3 EV in 1/3 stop increments |
| Sync Mode | High-Speed Sync (up to 1/8000s), First-Curtain Sync, Second-Curtain Sync |
| Wireless Flash | 2.4G Wireless X System (Master/Slave) |
| Wireless Range | Approx. 100 meters (328 feet) |
| Channels | 32 (1-32) |
| Groups | 5 (A, B, C, D, E) |
| Power Source | 7.2V/2200mAh Lithium Battery |
| Full Power Flashes | Approx. 650 |
| Recycle Time | Approx. 1.7 seconds |
| Modeling Lamp | 2W LED (5300K±300), 10 levels |
| Dimensions (W x H x D) | Approx. 6.54 x 2.8 x 1.93 inches (16.6 x 7.1 x 4.9 cm) |
| Weight (with battery) | Approx. 1.76 pounds (800g) |
What's in the Box
- 1x Godox V480N Nikon Flash
- 1x Storage Bag
- 1x Diffuser
- 1x Adapter
- 1x Mini Stand
- 1x Lithium Battery
- 1x USB-C Charging Cable
Warranty and Support
For warranty information and technical support, please refer to the official Godox website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
Official Godox Website: www.godox.com