1. Introduction
Thank you for purchasing the Feit Electric Katalyst 5-Light Matte Black Modern Adjustable CCT Integrated LED Chandelier, model CHD345CCTNLBK. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
2. Safety Information
- WARNING: RISK OF SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- WARNING: RISK OF FIRE. Use only with specified bulbs/LEDs.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all connections are secure and correct.
- Do not operate this fixture with a damaged cord or if it has been dropped or damaged in any way.
- Do not attempt to modify the fixture. Any modifications will void the warranty.
- Keep flammable materials away from the fixture.
3. Package Contents
Carefully unpack your new chandelier and ensure all parts are present. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact Feit Electric customer service for assistance.
- LED Chandelier Fixture (1)
- Mounting Hardware Kit (1)
- Instruction Manual (1)
4. Setup and Installation
Professional installation is recommended. Always ensure power is disconnected before beginning installation.
- Turn Off Power: Locate the circuit breaker that supplies power to the light fixture outlet box and turn it off.
- Prepare Mounting: Attach the mounting bracket to the electrical junction box using the provided screws.
- Wire Connections: Connect the fixture's wires to the household electrical wires according to standard wiring practices (black to black, white to white, ground to ground). Secure connections with wire nuts.
- Mount Fixture: Carefully lift the chandelier and secure it to the mounting bracket. Ensure all connections are tucked safely into the junction box.
- Adjust Height (if applicable): Adjust the suspension rods or chain to the desired height before final tightening.
- Restore Power: Once installation is complete and secure, restore power at the circuit breaker.
Image: The Feit Electric Katalyst 5-Light LED Chandelier, featuring a matte black rectangular frame with five exposed LED bulbs, suspended by two rods from a ceiling canopy. This image illustrates the complete fixture assembly.
5. Operating Instructions
This chandelier features Adjustable CCT (Correlated Color Temperature) and 3-Light Modes, allowing you to customize the lighting to your preference.
- Standard Operation: Turn the wall switch ON to illuminate the fixture.
- Adjustable CCT: To change the color temperature (e.g., Warm White, Cool White, Daylight), quickly toggle the wall switch OFF and then ON again. The fixture will cycle through available CCT settings. Pause on your desired setting.
- 3-Light Modes: The fixture may offer different light output modes (e.g., full brightness, dimmed, night light). Similar to CCT adjustment, quickly toggle the wall switch OFF and ON to cycle through these modes.
- Memory Feature: The fixture is designed to remember the last selected CCT and light mode when turned off for a short period.
6. Maintenance
To ensure the longevity and appearance of your chandelier, follow these maintenance guidelines:
- Cleaning: Always disconnect power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish.
- Bulb Replacement: This fixture uses integrated LED technology, meaning the LEDs are built into the fixture and are not user-replaceable. If the LEDs fail, the entire fixture may need replacement.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
7. Troubleshooting
If you experience issues with your chandelier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. | No power, loose wiring, faulty switch. | Check circuit breaker. Ensure all wire connections are secure. Test the wall switch. |
| Light flickers. | Loose wiring, incompatible dimmer (if applicable). | Check wire connections. Ensure dimmer is LED compatible. |
| CCT or light modes do not change. | Incorrect toggling sequence. | Ensure quick OFF/ON toggling of the wall switch. |
If the problem persists after attempting these solutions, contact Feit Electric customer support.
8. Specifications
- Model: CHD345CCTNLBK
- Brand: Feit Electric
- Type: Integrated LED Chandelier
- Wattage: 60-Watt (equivalent, actual LED wattage will be lower)
- Lights: 5-Light
- Finish: Matte Black
- Features: Adjustable CCT, 3-Light Modes
- Manufacturer: Feit Electric
9. Warranty and Support
Feit Electric products are manufactured to the highest quality standards. This product is backed by a limited warranty from the date of purchase. For detailed warranty information, technical support, or to report missing/damaged parts, please visit the official Feit Electric website or contact their customer service department directly. Please have your model number (CHD345CCTNLBK) and proof of purchase available when contacting support.
For more information, visit: www.feit.com
