1. Introduction
This instruction manual provides guidance for the proper installation and use of the ReplacementScrews wall mount bolt set, designed for compatibility with the ONN 100012585-M 50-inch Smart TV. This set includes all necessary screws and washers for securely mounting your television to a VESA-compatible wall bracket.
It is crucial to read this manual thoroughly before beginning installation to ensure a safe and correct setup. Always refer to your television's original manual and your wall mount's instructions for specific details regarding your equipment.
2. Safety Information
- Consult TV and Mount Manuals: Always refer to the instruction manuals provided with your television and wall mount for specific safety warnings and installation procedures.
- Verify Compatibility: Ensure these screws are the correct size and type for your specific TV model (ONN 100012585-M) and wall mount. Incorrect screws can lead to TV damage or detachment.
- Professional Installation: If you are unsure about any part of the installation process, seek assistance from a qualified professional.
- Secure Fastening: Ensure all screws are tightened securely, but do not overtighten, as this can strip threads or damage components.
- Wall Structure: Confirm that the wall structure can safely support the weight of your television and the wall mount.
3. Package Contents
The ReplacementScrews wall mount bolt set includes the following components:
- 4 x Metric Machine Screws (Black Oxide Plated)
- 4 x Flat Washers (Extra Large)
- 4 x Split Lock Washers
Image 3.1: All components of the screw set, including four metric machine screws, four flat washers, and four split lock washers.
Image 3.2: The complete set of four screws, each with its corresponding flat and split lock washers.
4. Setup and Installation
Follow these steps to properly install your ONN 100012585-M 50-inch Smart TV using the provided ReplacementScrews wall mount bolt set. This guide assumes you have already installed your VESA-compatible wall mount to the wall according to its manufacturer's instructions.
- Identify TV Mounting Holes: Locate the four threaded mounting holes on the back of your ONN 100012585-M television. These are typically arranged in a square or rectangular pattern.
- Prepare Screws: For each mounting hole, assemble one metric machine screw, one flat washer, and one split lock washer. The flat washer should be placed against the screw head, followed by the split lock washer.
- Attach Mounting Brackets: Align the mounting brackets from your wall mount with the threaded holes on the back of the TV. Insert the assembled screws through the holes in the mounting brackets and into the TV's threaded holes.
- Tighten Screws: Using an appropriate screwdriver, carefully tighten all four screws. Ensure they are snug and secure, providing a firm connection between the TV and the mounting brackets. The split lock washers will exert pressure to prevent loosening over time. Do not overtighten.
- Mount TV to Wall Bracket: Once the mounting brackets are securely attached to the TV, follow your wall mount's instructions to safely lift and attach the television to the wall-mounted portion of the bracket.
- Verify Security: After mounting, gently test the stability of the TV on the wall mount to ensure it is securely fastened and level.
Image 4.1: Correct assembly of a screw with flat and split lock washers.
Image 4.2: Top view of the screw head, indicating the drive type for tightening.
Image 4.3: Side profile of an assembled screw, illustrating its full length and thread.
5. Usage Considerations
These screws are designed for a single, secure installation. Once installed, they provide a stable connection for your TV to a VESA-compatible wall mount. Avoid frequent removal and re-installation, as this can wear down the threads on both the screws and the TV's mounting holes.
6. Maintenance
While these screws are designed for long-term stability, periodic checks are recommended:
- Visual Inspection: Periodically inspect the screws and the connection points for any signs of loosening, corrosion, or damage.
- Tightness Check: If accessible, gently check the tightness of the screws every 6-12 months. Do not overtighten.
- Cleaning: If necessary, wipe the screws with a dry, soft cloth. Avoid using harsh chemicals that could damage the black oxide plating.
7. Troubleshooting
- Screws Do Not Fit:
- Ensure you have the correct TV model (ONN 100012585-M).
- Verify that the mounting holes on your TV are M6 VESA compatible.
- Consult your TV's manual to confirm the required screw specifications.
- TV Feels Loose After Installation:
- Recheck the tightness of all four screws connecting the mounting brackets to the TV.
- Ensure the wall mount itself is securely fastened to the wall according to its instructions.
- Confirm that the TV is correctly seated and locked into the wall mount mechanism.
- Screws Appear Damaged:
- Do not use damaged screws. Contact ReplacementScrews for assistance.
8. Specifications
| Product Name | ReplacementScrews Wall Mount Screws Compatible with ONN 100012585-M - 50 Inch Smart TV |
| Model Number | RSAZN10242508 |
| Compatibility | ONN 100012585-M 50-inch Smart TV (M6 VESA compatible) |
| Material | Metal |
| Exterior Finish | Black Oxide Plating (Corrosion Resistant) |
| Head Style | Pan Head |
| Thread Size | Standard (M6) |
| Package Quantity | 4 Screws, 4 Flat Washers, 4 Split Lock Washers |
| Product Dimensions | 6.5 x 3.75 x 0.5 inches (packaged) |
| Item Weight | 1.06 ounces (packaged) |
9. Warranty and Support
For any questions regarding the ReplacementScrews wall mount bolt set, or if you encounter any issues during installation, please contact ReplacementScrews customer support. Refer to the product packaging or the seller's information on the purchase platform for contact details.
Information regarding product warranty, if applicable, can be found through the seller or manufacturer's official channels.