KEKOY 17.5 Inch Suction Grab Bars Instruction Manual

1. Introduction

Thank you for choosing the KEKOY 17.5 Inch Suction Grab Bars. This product is designed to provide reliable support and stability in bathtubs and showers, enhancing safety for seniors, the elderly, and individuals with limited mobility. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

• Crucial Installation Requirement: For a secure and lasting hold, install the grab bar only on a smooth, continuous, non-porous tile surface without any gaps. Tiles must be larger than 6x6 inches. Avoid rough, porous, or uneven surfaces such as wood, textured tiles, or painted walls.
• Safety Indicators: The grab bar features a color alert window to indicate suction status:
  • Green: Secure suction and high grip. Safe to use.
  • Red + Green: Air leakage detected. Suction is not adequate. Reinstall immediately.
  • Red: Suction released. Unsafe. Reinstall immediately.

  Always check the indicator window before each use. If it is not fully green, do not rely on the grab bar for support.

• Weight Capacity: This grab bar supports up to 264 lbs (120 kg), suitable for most adults.
• ASTM Compliance: Engineered in accordance with the rigorous ASTM F446-19 standard for enhanced safety and reliable stability.

Image: KEKOY Suction Grab Bar with color alert window. Green indicates safe to use, red + green indicates unsafe due to air leakage, and red indicates unsafe due to suction release.

Image: Illustration of compatible (smooth, flat) and incompatible (rough, porous, uneven) surfaces for installation.

Image: Guide for checking tile size. Tiles must be larger than 6x6 inches and away from grout lines for proper suction.

3. Product Features

• Ergonomic Design: Curved handle with gentle ridges for a natural, firm grip, even when wet. Handle length is 7.56 inches.
• Strong Suction: Features reinforced TPE suction cups that grip firmly on smooth surfaces.
• Durable Construction: Internal rust-proof 304 stainless steel spring provides sturdy support. The tough plastic shell is gentle on hands.
• Versatile Placement: Adjust its angle to fit your shower, tub, or toilet area.

Image: Detailed view of the grab bar's textured grip and finger pressure groove, designed for secure holding even with wet hands.

4. Installation

Installation is quick and easy, typically taking about 5 seconds. No drilling, screws, or glue are required.

1. Prepare Surface: Choose a smooth, non-porous, dry, and clean surface. Ensure tiles are larger than 6x6 inches and avoid grout lines.
2. Position Grab Bar: Place the grab bar firmly against the desired wall surface.
3. Create Vacuum Seal: Push the grab bar hard against the wall. While maintaining pressure, flip down both blue latches on each end of the bar.
4. Safety Verification: Observe the color alert windows. Both indicators must show a solid green color for secure suction. If red or red+green is visible, release the latches, reposition, and re-apply pressure.
5. Test Stability: Once both indicators are green, give the grab bar a good tug to ensure it is securely in place before relying on it for full support.

Image: Step-by-step visual guide for installing the grab bar, from surface preparation to safety verification.

5. Operation

Once securely installed with both indicators showing green, the KEKOY Suction Grab Bar provides a stable handhold for assistance when entering or exiting the shower or bathtub. Always apply pressure gradually and ensure the green indicator remains visible during use.

Image: An elderly woman using the grab bar for stability while entering a bathtub.

6. Removal and Maintenance

The grab bar is easily removable for cleaning or repositioning.

1. Unlock Latches: Flip up both blue latches on each end of the grab bar.
2. Release Suction: Gently pull the small tabs on the suction cups to release the vacuum seal.
3. Clean: Clean the suction cups and the wall surface with mild soap and water. Ensure both are completely dry before reinstallation.

Image: Step-by-step visual guide for removing and cleaning the grab bar.

7. Troubleshooting

• Indicator is Red or Red+Green: This means the suction is not secure. Immediately remove the grab bar.
• Grab Bar is Loose: Remove the grab bar. Clean the suction cups and ensure the wall surface is clean, dry, and flat. Reattach the suction cup following the installation steps.
• Repeated Removal: Frequent removal and reinstallation will not affect the grab bar's holding power, provided proper cleaning and surface preparation are maintained.

8. Specifications

9. Warranty and Support

For warranty information or product support, please contact the manufacturer directly or refer to the product packaging for customer service details.