NUX Solid Studio MKII User Manual

1. Introduction

The NUX Solid Studio MKII (NSS-6) is a versatile guitar pedal designed to provide realistic amplifier and cabinet simulation. It features the TSAC-4K (White-box) algorithm for authentic preamp and power amp responses, along with Impulse Response (IR) loading capabilities. This manual provides detailed instructions for setting up, operating, and maintaining your Solid Studio MKII.

What's in the Box:

• NUX Solid Studio MKII Guitar Pedal
• Power Adapter (DC 9V)
• USB Cable
• User Manual

2. Product Overview

Front Panel Controls and Display

The front panel features a 2.86-inch color LCD display (960*376 resolution) for intuitive operation. Below the display are four dedicated buttons for AMP, I.R., EQ, and AMB (Ambience) effect blocks. A large rotary encoder in the center allows for navigation and parameter adjustment. Two footswitches, labeled GLOBAL and ON, provide control over presets and effect activation.

Image: Front view of the NUX Solid Studio MKII, showing the color LCD, AMP, I.R., EQ, AMB buttons, central rotary knob, and GLOBAL/ON footswitches.

Rear Panel Connections

The rear panel provides all necessary input and output connections for integrating the Solid Studio MKII into your setup.

Image: Rear view of the NUX Solid Studio MKII, detailing the INPUT, THROUGH, OUTPUT 1, OUTPUT 2 (stereo balanced 1/4-inch outs with GND lift), USB-C, DC 9V power input, and AUX IN connections.

• INPUT: 1/4-inch instrument input.
• THROUGH: 1/4-inch output to parallel the power amp signal, useful for connecting to a real amplifier's power section.
• OUTPUT 1 & 2: Stereo balanced 1/4-inch outputs with Ground Lift for connecting to a mixer, audio interface, or power amplifier.
• USB: USB-C port for firmware updates, USB audio interface functionality, and connection to the SOLID STUDIO editor software. This port also supports MIDI.
• DC 9V: Power input for the included 9V DC adapter.
• AUX IN: 1/8-inch auxiliary input for connecting external audio sources for practice.

3. Setup

1. Power Connection: Connect the included 9V DC power adapter to the DC 9V input on the rear panel. Plug the adapter into a suitable power outlet. The unit will power on automatically.
2. Instrument Connection: Connect your guitar or other instrument to the INPUT jack on the rear panel.
3. Audio Output:
   • For stereo output, connect OUTPUT 1 and OUTPUT 2 to your mixer, audio interface, or two separate amplifier inputs.
   • For mono output, connect OUTPUT 1 to your desired destination.
   • For silent practice, connect headphones to the PHONES output (located on the side, not visible in rear panel image).
   • To use the Solid Studio MKII with a real amplifier's power section, connect the THROUGH output to your amplifier's input and use the INJECT input mode.
4. USB Connection (Optional): Connect the USB-C port to your computer for firmware updates, using the unit as an audio interface, or editing presets with the SOLID STUDIO editor software.
5. Auxiliary Input (Optional): Connect an external audio player (e.g., smartphone, MP3 player) to the AUX IN jack for playing along with backing tracks.

4. Operating Instructions

Basic Operation

• Power On/Off: The unit powers on when connected to the DC 9V adapter. Disconnect power to turn off.
• Preset Selection: Use the GLOBAL footswitch to cycle through presets. The display will show the current preset number and settings.
• Effect On/Off: Use the ON footswitch to bypass or engage the selected effect block within a preset.

Navigating and Editing

• Block Selection: Press the AMP, I.R., EQ, or AMB buttons to select and edit parameters for each effect block.
• Parameter Adjustment: Turn the large rotary encoder to adjust values for the currently selected parameter. Press the encoder to confirm selections or enter sub-menus.
• Saving Presets: After making changes, follow the on-screen prompts to save your preset. The Solid Studio MKII offers 128 preset slots.

Advanced Features

• TSAC-4K Amp Modeling: The unit features independent Preamp and Power Amp simulation with 8 classic AMP models and 4 inputs for patch cable jumping.
• IR Loader: Independent L/R 60 IR slots are available for loading custom Impulse Responses.
• Input Modes: Select between NORMAL and INJECT input modes. INJECT mode is used to parallel the power amp signal, allowing the unit to be placed between an amplifier and a speaker cabinet (or loadbox) to utilize only the signal chain beyond the amp simulation.
• Global Settings: Access global settings to adjust parameters such as NOISE GATE, EQ, PHONES LEVEL, AUX IN LEVEL, and OUT LEVEL.
• USB Audio Interface: The USB-C port allows the Solid Studio MKII to function as an audio interface for direct recording to a computer.
• Firmware Update: Connect via USB-C to update the device firmware using the NUX update tool.
• SOLID STUDIO Editor Software: Use the dedicated editor software on your computer for comprehensive control, preset management, and IR loading.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the unit. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
• Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
• Software Updates: Regularly check the official NUX website for firmware updates to ensure optimal performance and access to new features.
• Power Supply: Always use the specified 9V DC power adapter. Using an incorrect power supply can damage the unit and void the warranty.

6. Troubleshooting

• No Sound:
  • Ensure the power adapter is securely connected and the unit is powered on.
  • Check all audio cable connections (input, output, amplifier/mixer).
  • Verify that the volume levels on the Solid Studio MKII, your instrument, and your amplifier/mixer are appropriately set.
  • Ensure the effect is not bypassed (check the ON footswitch status).
  • Check global settings for output level and noise gate.
• Distorted Sound:
  • Reduce the input gain on the Solid Studio MKII or your instrument.
  • Check the output level to ensure it is not clipping your amplifier or mixer.
  • Review the settings of the AMP, I.R., and EQ blocks for excessive gain.
• Unit Not Responding:
  • Disconnect and reconnect the power adapter.
  • If connected to a computer, ensure the correct drivers are installed and the editor software is up to date.
• USB Connection Issues:
  • Try a different USB-C cable or port on your computer.
  • Ensure the necessary drivers are installed for your operating system.
  • Restart your computer and the Solid Studio MKII.

7. Specifications

8. Warranty Information

NUX products are covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the warranty card included with your product or visit the official NUX website.

9. Support

For further assistance, technical support, firmware updates, or to download the SOLID STUDIO editor software, please visit the official NUX website:

www.nuxefx.com

You may also contact NUX customer service through the contact information provided on their website.