BrickBling Lighting Kit for LEGO Ideas Pixar Luxo Jr. 21357

Introduction

This manual provides instructions for the installation and operation of the BrickBling Lighting Kit, designed specifically for the LEGO Ideas Pixar Luxo Jr. model 21357. This product is a lighting accessory kit only and does not include the LEGO model itself. The kit enhances your LEGO model with integrated lighting, offering a dynamic display.

Image: The BrickBling lighting kit installed on the LEGO Pixar Luxo Jr. model, showcasing the illuminated lamp and the Pixar ball. This image demonstrates the final appearance of the lit model.

Image: A comparison showing two LEGO Pixar Luxo Jr. models; one without the lighting kit and one with the BrickBling lighting kit installed and illuminated. This highlights that the product is an accessory kit.

Safety Information

WARNING: CHOKING HAZARD - Small parts. Not suitable for children under 3 years. Adult supervision is recommended during installation and use.

The recommended voltage for this lighting kit is 3-5V. Do not exceed the recommended voltage to prevent damage to the components.

Package Contents

Please verify that all components listed below are included in your package:

• Light Kit components
• Power Supply
• Online Instruction Access Card/Booklet

Image: A visual representation of the package contents, detailing each component such as the warm white light panel, expansion board, action control module, connecting cable, and power supply. An instruction booklet is also shown.

Setup and Installation

The BrickBling Lighting Kit is designed for easy integration with your LEGO Ideas Pixar Luxo Jr. 21357 model. Detailed, step-by-step online instructions are provided to guide you through the installation process. These instructions ensure minimal exposed wiring and a seamless fit with your LEGO set.

Accessing Online Instructions:

1. Locate the booklet or card included in your package.
2. Visit the website address printed on this booklet/card.
3. Enter the characters from the label on the back of your product package to access the PDF and video instructions.

Follow the online instructions carefully to install the lighting components into your LEGO model. Ensure all connections are secure before powering on the kit.

Operating Instructions

This BrickBling Lighting Kit is the Light Control Version, offering interactive control over your LEGO model's illumination.

Powering On/Off:

• Connect the power supply to a USB port (3-5V).
• The kit includes an Action Control Module. Refer to the online instructions for specific details on how to use this module to control the light. Typically, this involves a physical interaction with the module or a designated part of the model to toggle the light.

Once powered, the integrated LED light will illuminate your LEGO Pixar Luxo Jr. model, bringing it to life.

Image: A hand interacting with the LEGO Pixar Luxo Jr. lamp, which is illuminated by the BrickBling lighting kit. This illustrates the 'Light Control Version' functionality.

Care and Maintenance

To ensure the longevity and optimal performance of your BrickBling Lighting Kit, please follow these guidelines:

• Cleaning: Use a soft, dry cloth to gently wipe the light components and wiring. Avoid using liquids or abrasive cleaners.
• Handling: Handle the light components and wires with care to prevent damage. Avoid excessive bending or pulling of wires.
• Power: Always disconnect the power supply before performing any maintenance or adjustments to the lighting kit.
• Storage: If storing the LEGO model with the lighting kit installed, ensure it is kept in a dry, dust-free environment away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter any issues with your BrickBling Lighting Kit, please refer to the following common solutions:

If these steps do not resolve the issue, please contact BrickBling customer support for further assistance.

Specifications

• Model Number: 21357
• Style: Light Control Version Light
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Light Source Type: Light Emitting Diode (LED)
• Number of Light Sources: 1
• Recommended Voltage: 3-5V
• Batteries: Not included (powered via USB)
• Included Components: Light Kit, Power Supply

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official BrickBling website. You can also find additional support and contact information on the BrickBling Store on Amazon.