Introduction
This manual provides detailed instructions for the RORRY 3-in-1 Wireless Power Bank, Model P1. This versatile device is designed to offer convenient and efficient charging for multiple Apple devices simultaneously, featuring MagSafe compatibility, an integrated Apple Watch charger, and a magnetic phone ring stand. Please read this manual thoroughly before using the product to ensure proper operation and safety.
Product Features
- 3-in-1 Wireless Charging: The RORRY 3-in-1 Wireless Power Bank eliminates cable clutter by allowing simultaneous wireless charging of your iPhone (MagSafe compatible), Apple Watch, and AirPods. The front surface charges iPhones and AirPods, while the rear surface integrates an Apple Watch charging module.
- Magnetic Attachment & Fast Charging: Equipped with strong magnets, this power bank attaches securely to MagSafe-compatible iPhones, initiating 15W fast wireless charging without the need for precise alignment. The Apple Watch charging module supports 3.5W MAX fast charging.
- 10000mAh High Capacity & Slim Design: Despite its compact, card-sized design (18.8mm thin), the power bank features a 10000mAh capacity. It can provide approximately 2 full charges for an iPhone, 16 charges for an Apple Watch, and 20 charges for AirPods. It also includes a USB-C port for charging other devices like iPads (up to 20W output).
- Integrated Phone Ring & Stand: The power bank includes a versatile phone ring that doubles as a stand. It can rotate 360 degrees and adjust 180 degrees, allowing for comfortable viewing angles while charging. The ring also provides a secure grip for your phone.
- Pass-Through Charging: Supports pass-through charging, allowing the power bank itself, your iPhone, and your Apple Watch to be charged simultaneously from a single power source.
- Safety Features: Incorporates multiple safety protections including overcharge, over-discharge, overcurrent, and NTC temperature management sensors to ensure device safety and battery health.
- Wide Compatibility: Compatible with iPhone 12-17 series, Apple Watch Ultra3/Ultra2/Ultra/11/10/9/8/7/SE/6/5, and AirPods 4/3/2 Pro. Supports MagSafe cases. A magnetic ring is included for non-MagSafe devices to enhance magnetic attachment.
Setup
- Initial Charge: Fully charge the RORRY Power Bank before its first use. Connect a USB-C cable to the power bank's Type-C port (up to 20W input) or a Lightning cable to the Lightning input (up to 10W input) and connect to a compatible power adapter.
- Power On: Press and hold the power button located on the side of the power bank to activate the wireless charging function. A blue indicator light will illuminate, indicating it is ready for use.
- Magnetic Ring (Optional): For devices not natively compatible with MagSafe, attach the provided magnetic ring to the back of your device or its case. This enhances the magnetic connection for secure attachment to the power bank.
Image: Rear view of the RORRY Power Bank, highlighting its compact size and various certifications.
Operating Instructions
- Charging iPhone (MagSafe): Align your MagSafe-compatible iPhone with the front charging surface of the power bank. The strong magnets will secure it in place, and charging will begin automatically once the power bank is activated.
- Charging Apple Watch: Place your Apple Watch on the dedicated charging module located on the rear surface of the power bank. Ensure proper alignment for charging to initiate.
- Charging AirPods: Place your AirPods charging case on the front charging surface, ensuring it is centered for optimal wireless charging.
- Wired Charging: Connect your device to the USB-C port on the power bank using a compatible cable for wired charging (up to 20W output).
- Using the Stand: Gently pull out the integrated phone ring from the back of the power bank. Adjust it to your desired angle (up to 180° tilt, 360° rotation) to use it as a stand for hands-free viewing.
- Using the Phone Ring: Insert your finger through the ring for a secure grip on your phone while the power bank is attached, preventing accidental drops.
- Pass-Through Charging: When the power bank is connected to a power source for charging, you can simultaneously charge the power bank itself, your iPhone, and your Apple Watch.
Image: The RORRY Power Bank demonstrating simultaneous charging of an iPhone, Apple Watch, and AirPods.
Image: The RORRY Power Bank's phone ring stand in various adjustable positions, showing 180-degree tilt and 360-degree rotation.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the power bank. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the finish.
- Storage: Store the power bank in a cool, dry place away from direct sunlight, high humidity, and extreme temperatures.
- Battery Care: To prolong battery life, fully charge and discharge the power bank at least once every three months if it is not in regular use. Avoid leaving it fully discharged for extended periods.
- Avoid Drops: Protect the device from drops, impacts, and excessive force, which can damage internal components and affect performance.
Troubleshooting
- Device not charging:
- Ensure the power bank is sufficiently charged.
- Press and hold the power button to activate the wireless charging function.
- Check for proper alignment of your device on the charging surface.
- Remove any thick cases that might interfere with wireless charging (maximum 3mm charging distance).
- Verify that your device is compatible with wireless charging.
- Slow charging:
- Ensure you are using a compatible fast-charging adapter for the power bank's input.
- Check if multiple devices are being charged simultaneously, which may reduce individual charging speeds.
- Ensure optimal alignment for wireless charging.
- Power bank overheating:
- It is normal for the power bank to warm up during charging. If it becomes excessively hot, disconnect all devices and allow it to cool down. Contact support if the issue persists.
- Ensure proper ventilation and avoid charging in confined spaces.
- Magnetic attachment is weak:
- Ensure your phone or case is MagSafe compatible. For non-MagSafe devices, use the included magnetic ring.
- Remove any non-magnetic accessories or thick cases that might obstruct the magnetic connection.
Specifications
Image: Detailed product specifications including model, battery, and charging outputs.
| Feature | Detail |
|---|---|
| Product Name | 3 in 1 Power Bank |
| Model Number | P1 |
| Built-in Battery | 10000mAh (3.85V/38.5Wh) |
| Wireless Charging Output | 15W/10W/7.5W |
| AirPods Charging Output | 5W |
| Apple Watch Charging Output | 3.5W |
| Type-C Input/Output | 5V-3A, 9V-2A, 12V-1.67A (Max 20W Output) |
| Lightning Input | 5V-2A (Max 10W Input) |
| Dimensions | Approx. 103 x 69 x 18.8 mm |
| Weight | Approx. 200 g |
| Battery Type | Lithium Ion |
Warranty and Support
1-Year Warranty: RORRY provides a 1-year warranty for product defects or malfunctions from the date of purchase. Please retain your proof of purchase for warranty claims.
Customer Support: For any inquiries, technical assistance, or issues with your RORRY 3-in-1 Wireless Power Bank, please contact RORRY-JP customer support. We are committed to providing prompt and thorough assistance to ensure your satisfaction.
Image: RORRY's commitment to quality, customer support, and 12-month product warranty.
