Glonerle 2 Person Inflatable Hot Tub Instruction Manual

Introduction

Thank you for choosing the Glonerle 2 Person Inflatable Hot Tub. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your hot tub. Please read all instructions carefully before use and retain this manual for future reference.

Important Safety Information

Always follow basic safety precautions when installing and using this electrical equipment. Failure to follow these instructions could result in injury or death.

• Do not permit children to use this product unless they are closely supervised at all times.
• Do not use the hot tub if the temperature is below 4°C (40°F).
• Always ensure the hot tub is placed on a flat, stable, and level surface capable of supporting its weight when filled.
• Do not operate the hot tub if it is damaged or malfunctioning.
• Consult a physician before use if you have health conditions, are pregnant, or are taking medication.
• Maximum water temperature is 40°C (104°F).
• Never use electrical appliances inside the hot tub.
• Keep all chemicals out of reach of children.

Package Contents

Verify that all components are present and undamaged before beginning assembly.

• 1 x Inflatable Hot Tub
• 1 x Heater Pump Unit
• 1 x SPA Cover
• 1 x Floor Mat
• 2 x Filter Cartridges
• 2 x Filter Covers
• 2 x Repair Kits
• 1 x Side Table (Optional, if included with your model)

Image: All components included in the Glonerle Inflatable Hot Tub package, including the hot tub, heater pump, cover, floor mat, filters, repair kits, and side table.

Setup Instructions

1. Choose a Location: Select a flat, level surface free of sharp objects. Ensure the area can support the weight of the filled hot tub (approximately 145 gallons of water plus occupants).
2. Lay Down Floor Mat: Unfold the provided floor mat on the chosen surface to protect the hot tub's base.
3. Position Hot Tub: Place the deflated hot tub on top of the floor mat.
4. Connect Heater Pump:
   • Unscrew the lower rear cap of the heater pump.
   • Connect the inflation hose to the pump's rear port and tighten securely.
   • Insert the free end of the hose into the hot tub's inflation valve.
   • Ensure the front bottom cap of the heater pump is closed.
5. Inflate Hot Tub:
   • Plug in the heater pump.
   • Press the "BUBBLE" button to begin inflation.
   • Inflate until the tub feels firm but not rigid. Do not overinflate.
   • Once fully inflated, press the "BUBBLE" button again to stop inflation and turn off the indicator light.
   • Disconnect the hose from the tub's inflation valve and secure the cap.
   • Detach the inflation hose from the pump's rear port and replace the cap.
6. Connect Water Hoses:
   • Unscrew the front bottom cap of the pump to expose the connection ports.
   • Connect the three provided hoses between the heater pump and the corresponding tub ports. Ensure all connections are tight to prevent leaks.
7. Install Filter Cartridge: Attach the filter cover to the filter cartridge, then install the cartridge onto the tub's inlet inside the hot tub.
8. Fill with Water: Fill the hot tub with water using a garden hose. Ensure the water level is between the "MINI" and "MAX" water level lines indicated inside the tub. Ensure adequate water pressure.
9. Secure Hot Tub Cover: Place the insulated cover over the hot tub and secure all buckles to retain heat and prevent debris from entering.

Operating Instructions

Control Panel Overview

The heater pump unit features an intuitive control panel for managing all hot tub functions.

Image: Close-up of the hot tub's control panel, showing buttons for Bubble, Lock, Temp Up/Down, Heater, and Filter.

• Heater Button: Activates the heating function. Set desired temperature between 68°F (20°C) and 104°F (40°C).
• Bubble Button: Activates the 100 air jets for a soothing massage. Press again to deactivate.
• Filter Button: Activates the water filtration system.
• Temp Up/Down Buttons: Adjust the desired water temperature.
• Lock Button: Locks the control panel to prevent accidental changes.

Heating the Water

After filling the hot tub, use the control panel to set your desired temperature. Press the "HEATER" button to begin heating. The water will heat from 68°F to 104°F. The thermal cover helps retain heat and improve energy efficiency.

Image: Diagram illustrating the efficient heating system and the insulated cover's role in maintaining water temperature.

Activating Bubble Jets

Press the "BUBBLE" button on the control panel to activate the 100 soothing air jets. These jets provide a relaxing massage experience. Note that activating the bubbles may slightly decrease water temperature, especially in cooler environments.

Image: A person enjoying the hot tub with active bubble jets, highlighting the soothing massage experience.

Maintenance

Water Filtration

The hot tub features a strong circulating filtration system to keep the water clean. Regularly check and clean the filter cartridge. Replace the filter cartridge every 168 hours (approximately once a week with regular use) for optimal performance.

Image: Illustration of the hot tub's filtration system, showing how it removes debris, leaves, and sand from the water.

Water Treatment

The integrated hard water treatment system helps maintain water quality, preserves bathing suits, and prevents skin dryness. For best results, use appropriate hot tub chemicals as recommended by a pool and spa professional.

Cleaning and Storage

• Drain the hot tub completely before cleaning or long-term storage.
• Use mild soap and water to clean the interior and exterior surfaces. Rinse thoroughly.
• Ensure the hot tub is completely dry before folding and storing to prevent mold and mildew.
• Store in a dry, temperate location away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

For warranty information, product support, or to purchase replacement parts, please contact Glonerle customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Online Support: Visit the official Glonerle store on Amazon for FAQs and additional resources: Glonerle Store