SingularXYZ E1 GNSS GPS RTK Base Station Land Surveying Equipment Instruction Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of the SingularXYZ E1 GNSS GPS RTK Base Station Land Surveying Equipment. The E1 system is designed for high-accuracy static surveying, coordinate collection, and point surveying applications, offering reliable positioning in various environments.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact SingularXYZ customer support.

• 1 x SingularXYZ E1 GNSS Receiver
• 1 x Aluminum Surveying Tripod
• 1 x USB-Type C Cable
• 1 x Charger
• 1 x UHF Whip Antenna
• 1 x 20 cm Extension Rod (for tribrach)
• 1 x GNSS Adapter
• 1 x Quick Start Guide & Card
• 1 x Measuring Tape
• 1 x Hard Carrying Case (for E1 receiver and accessories)
• 1 x Aluminum Plate

Figure 2.1: Contents of the SingularXYZ E1 Base Station package, including the E1 receiver, tripod, cables, charger, antennas, adapter, quick start guide, measuring tape, carrying case, and aluminum plate.

3. Product Overview

3.1. E1 GNSS Receiver Features

• Compact and Lightweight: The E1 receiver features a compact design (Φ133.5 mm × 67 mm) and weighs 870g, ensuring portability without compromising performance.
• Rapid Positioning: Provides fast and stable positioning, even in challenging environments such as areas with multipath interference, under tree canopies, and in urban canyons.
• Extended Battery Life: Offers up to 20 hours of continuous operation on a single charge.
• Fast Charging: Supports fast charging via a Type-C USB port.

Figure 3.1: The SingularXYZ E1 GNSS RTK Base Station and accompanying tripod.

3.2. Tripod Features

• High-Quality Construction: Crafted from premium aluminum for exceptional durability and lightweight performance.
• Enhanced Stability: Designed to provide a steady base for GPS, GNSS, RTK, and laser level equipment, ensuring accurate measurements across various terrains.
• Thread: Features a 5/8x11 thread for holding surveying equipment such as optical levels and other devices.
• Built-in Strap: Includes a strap to secure and hold legs closed during transport, which can also be used as a shoulder strap.
• Pointed Steel Feet: Heavy-duty shoe with foot pad and replaceable steel feet for secure placement.

Figure 3.2: Detailed view of the aluminum surveying tripod, highlighting its features.

4. Setup Instructions

4.1. Assembling the Tripod

1. Unfold the tripod legs and extend them to the desired height. Ensure the leg clamps are securely tightened.
2. Adjust the tripod legs to ensure the top plate is level. Use the built-in bubble level on your surveying instrument (if applicable) or a separate leveling tool.
3. Press the pointed steel feet firmly into the ground for maximum stability.

Figure 4.1: Proper setup of the surveying tripod, showing extended legs and stable positioning.

4.2. Mounting the E1 GNSS Receiver

1. Attach the GNSS adapter to the 5/8x11 thread on the tripod's top plate.
2. If using, attach the 20 cm extension rod to the GNSS adapter.
3. Carefully screw the E1 GNSS receiver onto the adapter or extension rod. Ensure it is securely fastened but do not overtighten.
4. Connect the UHF whip antenna to the designated port on the E1 receiver if using UHF radio for RTK corrections.

Figure 4.2: The E1 GNSS receiver correctly mounted on the tripod with an adapter and extension rod.

4.3. Initial Power On and Charging

1. Before first use, ensure the E1 receiver is fully charged. Connect the provided USB-Type C cable to the receiver and the charger to a power outlet.
2. The charging indicator light on the E1 receiver will show its status. Refer to the Quick Start Guide for specific indicator light patterns.
3. To power on the E1 receiver, press and hold the power button until the indicator lights illuminate.

5. Operation Guide

5.1. Basic Operation Modes

The SingularXYZ E1 GNSS receiver supports various operation modes for different surveying applications. Common modes include:

• Static Surveying: For achieving the highest accuracy by collecting raw GNSS data over an extended period for post-processing.
• RTK (Real-Time Kinematic) Surveying: For real-time high-accuracy positioning using correction data from a base station or network. The E1 can function as a base station to transmit corrections.
• PPK (Post-Processed Kinematic) Surveying: Similar to RTK but correction data is applied after data collection.

5.2. Connecting to a Data Collector

The E1 receiver typically connects to a data collector (not included) via Bluetooth or USB for configuration and data management. Refer to your data collector's manual for specific connection procedures.

1. Ensure Bluetooth is enabled on both the E1 receiver and your data collector.
2. Search for available devices on your data collector and select the E1 receiver.
3. Pair the devices using the default PIN (if required, refer to the Quick Start Guide).
4. Once connected, use the data collector's software to configure the E1 receiver's settings, such as observation interval, data logging, and RTK correction source.

5.3. Data Collection

Follow the instructions in your data collector's software to initiate data collection. Ensure the E1 receiver has a clear view of the sky for optimal satellite reception.

For RTK operations, confirm that the base station is transmitting corrections and the rover (if applicable) is receiving them.

6. Maintenance and Care

• Cleaning: Wipe the E1 receiver and tripod with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the equipment in its carrying case in a cool, dry place when not in use. Avoid extreme temperatures and direct sunlight.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the battery regularly, even during long periods of storage.
• Firmware Updates: Periodically check the SingularXYZ official website for firmware updates for the E1 receiver to ensure optimal performance and access to new features.
• Inspection: Regularly inspect cables, connectors, and the tripod for any signs of wear or damage. Replace damaged components immediately.

7. Troubleshooting

8. Technical Specifications

Note: Dimensions for the tripod are approximately 35.43 inches (90cm) collapsed and 62.20 inches (158cm) extended, with a head width of 7.1 inches (18cm).

Figure 8.1: Dimensions of the surveying tripod in both collapsed and extended states.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official SingularXYZ website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

SingularXYZ is committed to providing reliable products and support. For further assistance, please visit the SingularXYZ Store on Amazon.