Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.
roborock Saros Z70 Robot Vacuum Cleaner and Floor Cleaning Solution User Manual
Model: Saros Z70
Introduction
Welcome to the user manual for your roborock Saros Z70 Robot Vacuum Cleaner and Floor Cleaning Solution Bundle. This advanced robotic cleaning system is designed to provide comprehensive and hands-free floor care, combining powerful vacuuming with intelligent mopping and obstacle handling. Please read this manual thoroughly to ensure proper setup, operation, and maintenance of your device.
Image: The roborock Saros Z70 robot vacuum, its multifunctional dock, and a bottle of roborock floor cleaning solution.
Key Features
Revolutionary OmniGrip Mechanical Arm
The Saros Z70 features a five-axis mechanical arm, the OmniGrip, designed to interact with its environment. This arm can move obstacles, lift small objects, and assist in organizing household items. It is equipped with dual cameras, LED lighting, and precision sensors for accurate object handling. The arm's gentle-grip design and built-in weight sensor prevent excessive squeezing, allowing it to handle objects up to 300g.
Image: The OmniGrip mechanical arm demonstrating its ability to move and clean around obstacles.
Ultimate Cleaning Coverage with Intelligent Multi-Pass Cleaning
The Saros Z70 employs an intelligent multi-pass cleaning strategy. It first detects, marks, and lifts obstacles, then returns to clean previously blocked areas, ensuring comprehensive coverage. The FlexiArm Riser Side Brush and Mop extend into corners and edges for 100% floor coverage. The AdaptiLift Chassis automatically adjusts to different surfaces, climbing thresholds up to 4cm and lifting its mop up to 22mm on carpets.
Image: Visual representation of the AdaptiLift Chassis's ability to navigate thresholds and lift the mop for carpets.
Powerful 22,000Pa Suction & Upgraded Hot Water Mopping
With an impressive 22,000Pa suction power, the Saros Z70 effectively removes dirt, dust, and debris from various floor types. The FreeFlow Main Brush minimizes hair tangling, and the 0% Hair Tangling Side Brush prevents wraparound. The upgraded Hot Water Mopping system accelerates the breakdown of tough stains, ensuring a deeper clean.
Image: Depiction of the robot's powerful suction and edge cleaning capabilities.
Image: The upgraded hot water mopping system, showing 200 RPM spinning speed, 30 water flow options, and quiet cleaning at 55dB.
StarSight 3D Navigation for Smarter, Safer, More Efficient Cleaning
The advanced StarSight Autonomous System 2.0 provides intelligent navigation and obstacle avoidance. Its VertiBeam Lateral Obstacle Avoidance technology allows the robot to accurately detect and navigate around furniture legs, cables, and up to 108 other types of obstacles, ensuring precise movement and thorough cleaning in complex environments.
Image: Details of the StarSight 3D Navigation system, highlighting its ability to recognize various obstacles and its ultra-slim design.
Multifunctional Dock 4.0 – 10-in-1 Hands-Free Maintenance
The accompanying dock provides extensive hands-free maintenance. Features include 176°F hot water mop washing and dock self-cleaning, automatic mop removal, auto detergent dispensing, smart re-wash & re-mop, and 131°F warm air drying. The auto dust emptying function allows for up to 7 weeks of hands-free cleaning.
Image: A detailed view of the Multifunctional Dock 4.0, illustrating its 10-in-1 maintenance capabilities.
Official Floor Cleaning Solution
The bundle includes roborock's official floor cleaning solution, designed for use with your robot vacuum. This solution is suitable for various hard floor surfaces including wood, tile, marble, and stone, ensuring effective and safe cleaning.
Image: The roborock official floor cleaning solution, suitable for multiple hard floor surfaces.
Setup
Unpacking: Carefully remove all components from the packaging. Ensure all parts, including the robot vacuum, multifunctional dock, power cable, and floor cleaning solution, are present.
Dock Placement: Place the multifunctional dock on a hard, flat surface against a wall, ensuring there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front. Plug the power cable into the dock and a power outlet.
Initial Charging: Place the robot vacuum onto the charging contacts of the dock. The robot will automatically begin charging. For first use, ensure the robot is fully charged.
App Installation: Download the roborock app from your mobile device's app store (iOS or Android). Follow the in-app instructions to connect your Saros Z70 to your home Wi-Fi network.
Filling Detergent Tank: Open the detergent tank on the multifunctional dock and fill it with the provided roborock floor cleaning solution. Refer to the dock's markings for the correct fill level.
Operating Instructions
Starting a Clean: Press the power button on the robot or use the roborock app to start a cleaning cycle. The robot will automatically map your home and begin cleaning.
Cleaning Modes: Use the app to select various cleaning modes, such as vacuuming only, mopping only, vacuuming and mopping, or custom cleaning zones.
Scheduling: Set up cleaning schedules through the roborock app for automated cleaning at preferred times.
Spot Cleaning: For concentrated cleaning of a specific area, place the robot in the center of the desired area and activate spot cleaning via the app.
Using the OmniGrip Arm: The OmniGrip arm's functions, such as obstacle moving or object lifting, can be managed and monitored through the roborock app's advanced settings.
Returning to Dock: The robot will automatically return to the dock when its battery is low or when a cleaning cycle is complete. You can also manually send it back via the app or by pressing the home button on the robot.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your roborock Saros Z70.
Dustbin and Filter: Empty the robot's dustbin after each cleaning cycle. Clean the filter regularly by tapping out debris or rinsing with water (allow to air dry completely before reinstallation).
Main Brush: Remove the main brush and clean any tangled hair or debris. Use the cleaning tool provided to cut and remove hair.
Side Brush: Check the side brush for tangled hair or debris and clean as needed.
Mop Pads: The dock automatically washes and dries the mop pads. Periodically remove and inspect them for wear or excessive dirt. Replace if necessary.
Sensors and Charging Contacts: Wipe all sensors (cliff sensors, wall sensor, etc.) and charging contacts on both the robot and the dock with a soft, dry cloth.
Detergent Tank and Water Tanks: Periodically clean the detergent tank and the clean/dirty water tanks in the dock to prevent buildup.
Troubleshooting
If you encounter issues with your Saros Z70, refer to the following common solutions:
Problem
Possible Cause
Solution
Robot does not turn on or charge.
Low battery; improper dock connection; power outlet issue.
Ensure robot is properly seated on dock. Check power cable connection and outlet. Allow robot to charge for several hours.
Robot gets stuck frequently.
Obstacles (cables, small items); dark surfaces; dirty sensors.
Clear floor of obstacles. Clean cliff sensors. Ensure sufficient lighting in dark areas.
Poor cleaning performance.
Full dustbin; clogged filter; worn brushes; low water in tank.
Empty dustbin and clean filter. Clean or replace brushes. Ensure clean water tank is full and dirty water tank is empty.
Mop not dispensing water or cleaning effectively.
Empty water tank; clogged water nozzle; dirty mop pads.
Refill clean water tank. Clean water nozzles. Ensure mop pads are clean and properly attached.
App connection issues.
Incorrect Wi-Fi password; router issues; robot too far from router.
Verify Wi-Fi password. Restart router and robot. Move robot closer to router during setup.
Hot Water Mopping Temperature: Upgraded system with 200 RPM spinning speed, 30 water flow options
Dock Features:
Hot Water Mop Washing: 176°F (80°C)
Hot Water Dock Self-Cleaning: 176°F (80°C)
Warm Air Drying: 131°F (55°C)
Auto Dust Emptying: Up to 7 weeks capacity
Automatic Mop Removal
Auto Detergent Dispensing
Smart Re-Wash & Re-Mop
Noise Level: 55 dB (Quiet Cleaning)
Floor Cleaning Solution: 480ml bottle, compatible with wood, hard floor, tile, marble, stone.
Warranty and Support
Your roborock Saros Z70 Robot Vacuum Cleaner is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official roborock website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact roborock customer service through their official website or the contact information provided in the product documentation.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
