FEETMOR FH03 Heated Mittens User Manual

Introduction

The FEETMOR FH03 Heated Mittens are designed to provide warmth and comfort in cold conditions. These mittens feature dual heating elements, rechargeable batteries, and touchscreen compatibility, making them suitable for various outdoor activities. This manual provides essential information for the safe and effective use of your heated mittens.

Safety Information

• Read all instructions before use to ensure proper operation and to prevent hazards.
• Battery Safety: Use only the provided 7.4V 22.2Wh Li-Polymer batteries and 20W PD adapter for charging. Do not expose batteries to extreme temperatures, puncture, or disassemble them. Discontinue use if batteries show signs of damage or swelling.
• Heat Settings: Monitor skin for any signs of discomfort or burns, especially during prolonged use at higher heat settings. If discomfort occurs, reduce the heat level or turn off the mittens.
• Cleaning: The mittens are designed for hand wash only. Disconnect and remove batteries before cleaning. Do not machine wash, tumble dry, or iron.
• Medical Conditions: Individuals with circulatory problems, diabetes, or other medical conditions should consult a physician before using heated products.
• Keep out of reach of children.

Package Contents

Please verify that all items are present in your package:

• 1 Pair of FEETMOR Heated Mittens
• 2 x 7.4V 3000mAh Li-Polymer Batteries
• 1 x Type-C Charger (20W PD adapter)
• 1 x User Manual
• 1 Pair of Ski Support Strips
• 1 x Gift Box (packaging)

Image: Package Contents. This image displays the complete package contents: one pair of heated ski gloves, two 7.4V 3000mAh Li-Polymer batteries, one Type-C charger, one user manual, one gift box, and one pair of ski support strips.

Setup

1. Charge Batteries: Before first use, fully charge both 7.4V 3000mAh Li-Polymer batteries using the provided Type-C charger. Connect the charger to a power source and then to each battery. The indicator light on the battery will show charging status.
2. Install Batteries: Locate the zippered pocket on the cuff of each mitten. Connect a fully charged battery to the cable inside the pocket. Carefully place the battery into the pocket and zip it closed.
3. Insert Ski Support Board (Optional): If desired, insert the ski support board into the designated pocket on the back of the mitten for added wrist support during activities like skiing. Ensure it is securely placed.
4. Wear Mittens: Put on the mittens and adjust the wrist strap and cuff drawstring for a comfortable and secure fit.

Image: FEETMOR FH03 Heated Mittens. A pair of FEETMOR FH03 heated mittens, illustrating the design and the internal heating elements.

Operating Instructions

The FEETMOR FH03 mittens feature dual control buttons for independent heating of the palm and back of the hand.

1. Power On/Off: Press and hold the power button (located on the back of the mitten) for approximately 2-3 seconds until the indicator light illuminates. The mitten will typically start on a medium heat setting. To power off, press and hold the button again for 2-3 seconds until the light turns off.
2. Adjust Heat Settings: Short press the power button to cycle through the available heat settings (High, Medium, Low). The indicator light color or pattern will change to reflect the current setting. There are six heat settings in total, allowing for independent or combined heating of the palm and back.
3. Low Battery Alert: The indicator light will flash when the battery level reaches approximately 25%, signaling that recharging is needed.
4. Touchscreen Functionality: The fingertips of the mittens are designed with touchscreen-compatible material, allowing you to operate most touch-enabled devices without removing your mittens.

Image: Heating Levels. This image details the nine heating levels available, including high (140°F/60°C for 2 hours), medium (122°F/50°C for 3 hours), and low (113°F/40°C for 4.5 hours), based on a 7.4V 22.2W battery. It also highlights faster heating speed (10s) and a low battery alert.

Image: Touchscreen Gloves. An individual demonstrating the touchscreen compatibility of the FEETMOR FH03 mittens, allowing phone usage without removal.

Maintenance

• Cleaning: Always remove batteries before cleaning. Hand wash the mittens gently with mild detergent in cold water. Do not wring or twist. Air dry thoroughly away from direct heat. Do not machine wash, tumble dry, bleach, or iron.
• Battery Storage: When not in use for extended periods, store batteries in a cool, dry place. It is recommended to charge batteries to about 50% capacity before storage and recharge every 3-6 months to maintain battery health.
• General Care: Avoid sharp objects that could damage the heating elements or fabric. Store mittens in a dry place when not in use.

Troubleshooting

Mittens not heating:

• Ensure batteries are fully charged and correctly connected inside the pockets.
• Press and hold the power button for 2-3 seconds to turn on. Short press to cycle through heat settings.
• Check if the battery indicator light is on. If flashing, recharge the battery.

Battery not charging:

• Verify the Type-C charger is properly connected to both the power source and the battery.
• Ensure the power outlet is functional.
• Check for any visible damage to the charger or battery.

Touchscreen not responding:

• Ensure the touchscreen-compatible fingertip material is making direct contact with the device screen.
• Some screen protectors or device settings may affect sensitivity.

Specifications

Image: Mitten Construction. An exploded view illustrating the six-layer construction of the mittens, including the outer shell, insulation foam, upgraded cotton, heat generating sheet, soft velvet lining, and warm cotton, designed for warmth and comfort. It also mentions improved blood circulation and benefits for Raynaud's.

Image: Size Chart. A size chart providing hand circumference measurements in inches and centimeters for X-Small (6.7-7.5 in / 17-19 cm), Small (7.5-8.1 in / 19-20.5 cm), Medium (8.1-9.1 in / 20.5-23 cm), and Large (9.1-10.1 in / 23-25.5 cm). A note advises choosing a larger size if your measurement is on the border.

Warranty and Support

Warranty: The FEETMOR FH03 Heated Mittens come with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

Customer Support: For any questions, concerns, or technical assistance, please contact FEETMOR customer support. Refer to the product packaging or the official FEETMOR website for current contact information.