1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ANYSECU W2 Pro 4G LTE Car Radio. This device combines advanced communication features with the versatility of the Android 11 operating system, offering GPS navigation, Bluetooth, and Wi-Fi connectivity. Please read this manual thoroughly before using the product to ensure proper function and safety.
Image 1.1: The ANYSECU W2 Pro 4G LTE Car Radio with its attached microphone. This image displays the front view of the radio unit, highlighting the screen, control buttons, and the connected hand microphone.
2. Package Contents
Verify that all items listed below are present in your product package:
- Radio Body
- Antenna
- Battery
- Power Cable
- Adapter
- Clip
- User Manual (this document)
Image 2.1: An overview of the standard package contents for the ANYSECU W2 Pro. This image shows the main radio unit, bracket, microphone, 4G antenna, microphone holder, GPS antenna, and power cable.
3. Setup
3.1. Physical Installation and Wiring
Proper installation is crucial for optimal performance. Ensure the device is securely mounted in your vehicle and connected to the power source correctly.
- Mounting: Use the provided bracket to securely mount the radio body in a suitable location within your vehicle, ensuring it does not obstruct your view or interfere with driving controls.
- Antenna Connection: Connect the included 4G antenna to the designated port on the radio.
- GPS Antenna Connection: Connect the GPS antenna to its dedicated port and place it in a location with a clear view of the sky for best signal reception.
- Power Connection: Connect the power cable according to the wiring schematics below.
Image 3.1: Wiring schematics for the ANYSECU W2 Pro. The red wire is for positive power, the black wire is for negative/ground, and the blue wire is for ACC (Accessory) power, typically connected to the vehicle's ignition switch.
3.2. Initial Power On
After completing the physical installation and wiring:
- Ensure all connections are secure.
- Press and hold the power button on the radio body until the screen illuminates.
- The device will boot into the Android 11 operating system. Follow any on-screen prompts for initial setup.
3.3. Network Connectivity
The W2 Pro supports 4G LTE, Wi-Fi, and Bluetooth connectivity.
- 4G LTE: Insert a compatible SIM card (not included) into the designated slot. Configure APN settings if required by your carrier.
- Wi-Fi: Navigate to Settings > Network & internet > Wi-Fi to connect to available Wi-Fi networks.
- Bluetooth: Navigate to Settings > Connected devices > Bluetooth to pair with Bluetooth accessories such as headsets or external speakers.
3.4. GPS Setup
The built-in GPS module provides accurate positioning. Ensure the GPS antenna is properly connected and has an unobstructed view of the sky. The device will automatically acquire GPS signals. You can use pre-installed navigation apps or download others from the Google Play Store.
Image 3.2: The ANYSECU W2 Pro displaying a real-time location map on its screen, illustrating its GPS positioning capabilities. This image highlights the device's navigation function within an urban setting.
4. Operating Instructions
4.1. Touch Screen and Basic Navigation
The W2 Pro features a 3.5-inch touch screen for intuitive operation.
- Tap: Select an item or open an application.
- Swipe: Navigate through menus or scroll content.
- Pinch-to-Zoom: Adjust map views or image sizes.
Image 4.1: The 3.5-inch touch screen of the ANYSECU W2 Pro displaying various Android applications. This image demonstrates the visual clarity and interactive nature of the screen for accessing device functions.
4.2. Android 11 System
The device runs on Android 11, providing access to a wide range of applications via the Google Play Store. Navigate the interface similar to any Android smartphone or tablet.
4.3. Communication (Zello & Real PTT)
The W2 Pro is compatible with Zello PTT and Real PTT platforms for push-to-talk communication over 4G LTE or Wi-Fi networks.
- Install Apps: Download and install Zello or Real PTT from the Google Play Store.
- Account Setup: Create or log in to your account within the respective application.
- PTT Function: Use the dedicated PTT button on the microphone to initiate and end transmissions.
- Talk Modes: The device supports single call, group call, and all call modes, configurable within the PTT applications.
4.4. SOS Features
The device is equipped with dedicated SOS buttons for emergency situations. Configure emergency contacts and settings within the device's system or a dedicated emergency application (if available).
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Avoid abrasive cleaners or solvents.
- Environmental Conditions: Operate the device within specified temperature and humidity ranges. Avoid exposure to extreme heat, cold, or moisture.
- Software Updates: Periodically check for system updates via the Android settings to ensure optimal performance and security.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Loose power connection, discharged battery, faulty power source | Check power cable connections. Ensure vehicle ignition is on if connected to ACC. Charge the battery. |
| No 4G LTE signal | No SIM card, incorrect APN settings, poor network coverage | Insert a valid SIM card. Verify APN settings with your carrier. Move to an area with better network coverage. |
| GPS not acquiring signal | GPS antenna obstructed, faulty antenna connection | Ensure GPS antenna has a clear view of the sky. Check antenna connection. |
| PTT not working | App not logged in, no network connection, microphone issue | Ensure Zello/Real PTT app is running and logged in. Verify network connectivity. Check microphone connection. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | W2Pro-US-11 |
| Operating System | Android 11 |
| RAM | 2GB |
| ROM | 16GB |
| Display | 3.5 inch Touch Screen |
| Connectivity | 4G LTE, WCDMA, GSM, WiFi, Bluetooth |
| Navigation | Built-in GPS |
| PTT Platforms | Zello, Real PTT |
| Emergency Features | Dedicated SOS buttons, Single/Group/All Talk modes |
| Item Weight | 2.5 pounds |
| Product Dimensions | 4 x 7.5 x 3.5 inches |
| Waterproof Rating | IP54 |
| Number of Channels | 1000 |
| Voltage | 12 Volts |
8. Warranty and Support
8.1. Warranty Information
The ANYSECU W2 Pro radio body is covered by a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
8.2. Customer Support
For technical assistance, warranty claims, or further inquiries, please contact ANYSECU customer support through the official website or your point of purchase. Please have your model number (W2Pro-US-11) and purchase details ready when contacting support.
